Application of a shell-shaped force sensor to a touch panel interface

The authors have developed a force-sensing mechanism composed of a force sensor device and an outer shell end-effector. The sensor can be used to sense force at any position on the body and calculate the position of a contact point without the need for a sensor array. The present study applies the force sensing mechanism as a haptic interface similar to a touch panel. Some technical issues for touch panel application in human environment are also shown. Finally, experimental results reveal that the proposed mechanism works as both a touch panel and a force sensor.

[1]  Yoji Yamada,et al.  Highly soft viscoelastic robot skin with a contact object-location-sensing capability , 2005, IEEE Transactions on Industrial Electronics.

[2]  Toshiaki Tsuji,et al.  Whole-Body Force Sensation by Force Sensor With Shell-Shaped End-Effector , 2009, IEEE Transactions on Industrial Electronics.

[3]  Shigeki Sugano,et al.  Whole-body covering tactile interface for human robot coordination , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[4]  Hiroshi Ishiguro,et al.  Haptic Communication Between Humans and Robots , 2005, ISRR.

[5]  Kouhei Ohnishi,et al.  Motion control for advanced mechatronics , 1996 .

[6]  Tatsuya Suzuki,et al.  Detection of Dynamic Information for Tactile Sensors Utilizing a Suspension Shell , 1995 .

[7]  Antonio Bicchi,et al.  Intrinsic contact sensing for soft fingers , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[8]  Kosei Kitagaki,et al.  Optimal approach velocity of an end-effector to the environment , 1993, Adv. Robotics.

[9]  Yoji Yamada,et al.  Evaluation of Pain Tolerance Based on a Biomechanical Method for Human-Robot Coexistence. , 1997 .

[10]  John Kenneth Salisbury,et al.  Interpretation of contact geometries from force measurements , 1984, ICRA.

[11]  Toshiyuki Murakami,et al.  Force Sensorless Compliant Control Based on Reaction Force Estiation Observer in Multi-Degrees-of-Freedom Robot , 1993 .

[12]  Kouhei Ohnishi,et al.  A Controller Design Method Based on Functionality , 2006, IEEE Transactions on Industrial Electronics.

[13]  Kouhei Ohnishi,et al.  A Wide-Range Velocity Measurement Method for Motion Control , 2009, IEEE Transactions on Industrial Electronics.

[14]  Kouhei Ohnishi,et al.  Motion Control Taking Environmental Information into Account , 2002 .

[15]  Taro Nakamura,et al.  Development of a soft manipulator using a smart flexible joint for safe contact with humans , 2003, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003).

[16]  Toshio Fukuda,et al.  Stable Contact Control of Robotic Manipulator Based on Unified Approach , 1993 .

[17]  Y. Kaneko,et al.  Whole-body force sensation by robot with outer shell , 2008, 2008 10th IEEE International Workshop on Advanced Motion Control.

[18]  K. Watanabe,et al.  A multi-link robotic finger-type soft touch-sensor system , 2004, Proceedings of IEEE Sensors, 2004..

[19]  Yoji Yamada,et al.  A failure-to-safety "Kyozon" system with simple contact detection and stop capabilities for safe human-autonomous robot coexistence , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.