Advances in Ultrasonic Welding of Thermoplastic Composites: A Review

The ultrasonic welding (UW) technique is an ultra-fast joining process, and it is used to join thermoplastic composite structures, and provides an excellent bonding strength. It is more cost-efficient as opposed to the conventional adhesive, mechanical and other joining methods. This review paper presents the detailed progress made by the scientific and research community to date in the direction of the UW of thermoplastic composites. The focus of this paper is to review the recent development of the ultrasonic welding technique for thermoplastic composites to thermoplastic composites, and to dissimilar materials. Different ultrasonic welding modes and their processing parameters, namely, weld time, weld pressure, amplitude, type of energy directors (EDs) affecting the welding quality and the advantages and disadvantages of UW over other bonding techniques, are summarized. The current state of the ultrasonic welding of thermoplastic composites and their future perspectives are also deliberated.

[1]  R. Barsotti,et al.  Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites , 2020 .

[2]  R. Barsotti,et al.  Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites , 2020, Materials.

[3]  Jinglei Yang,et al.  Enhanced Mode I fracture toughness of UHMWPE fabric/thermoplastic laminates with combined surface treatments of polydopamine and functionalized carbon nanotubes , 2019 .

[4]  I. F. Villegas.  Ultrasonic Welding of Thermoplastic Composites , 2019, Front. Mater..

[5]  D. Bortoluzzi,et al.  Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrix , 2019, Composites Part B: Engineering.

[6]  Jinglei Yang,et al.  Mechanical properties and failure modes of hybrid fiber reinforced polymer composites with a novel liquid thermoplastic resin, Elium® , 2019, Composites Part A: Applied Science and Manufacturing.

[7]  I. F. Villegas,et al.  Diagnostic of manufacturing defects in ultrasonically welded thermoplastic composite joints using ultrasonic guided waves , 2019, NDT & E International.

[8]  I. F. Villegas,et al.  Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites , 2019, Composites Part B: Engineering.

[9]  K. Dilger,et al.  Improvement of the adhesion of continuously manufactured multi-material joints by application of thermoplastic adhesive film , 2019, International Journal of Adhesion and Adhesives.

[10]  S. Joshi,et al.  Energy Characteristics and Failure Mechanisms for Textile Spread Tow Thin Ply Thermoplastic Composites under Low-velocity Impact , 2019, Fibers and Polymers.

[11]  S. Hu,et al.  Weld Quality Prediction in Ultrasonic Welding of Carbon Fiber Composite Based on an Ultrasonic Wave Transmission Model , 2019, Journal of Manufacturing Science and Engineering.

[12]  E. C. Botelho,et al.  Fractographic evaluation of welded joints of PPS/glass fiber thermoplastic composites , 2019, Engineering Failure Analysis.

[13]  A. Arias,et al.  Innovative acrylic thermoplastic composites versus conventional composites: Improving the impact performances , 2019, Composite Structures.

[14]  S. Joshi,et al.  Flexural characteristics of novel carbon methylmethacrylate composites , 2019, Composites Communications.

[15]  J. Tavares,et al.  Resistance welding of thermoplastic composites with a nanocomposite heating element , 2019, Composites Part B: Engineering.

[16]  Sunil C. Joshi,et al.  Experimental and Microscopic Investigation on Mechanical Performance of Textile Spread-tow Thin Ply Composites , 2019, Fibers and Polymers.

[17]  D. Ray,et al.  Viscoelastic and drop-weight impact properties of an acrylic-matrix composite and a conventional thermoset composite – A comparative study , 2019, Materials Letters.

[18]  Sunil C. Joshi,et al.  Effect of fixation stitches on out-of-plane response of textile non-crimp fabric composites , 2019 .

[19]  Hao Li,et al.  Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding , 2019, Journal of Manufacturing Processes.

[20]  Z. Dawei,et al.  Review on Joining Process of Carbon Fiber-Reinforced Polymer and Metal: Methods and Joining Process , 2018, Rare Metal Materials and Engineering.

[21]  S. Joshi,et al.  Low-velocity impact response of carbon fibre composites with novel liquid Methylmethacrylate thermoplastic matrix , 2018, Composite Structures.

[22]  G. Palardy,et al.  A study on amplitude transmission in ultrasonic welding of thermoplastic composites , 2018, Composites Part A: Applied Science and Manufacturing.

[23]  A. Gibson,et al.  Tensile and fatigue properties of single lap joints of aluminium alloy/glass fibre reinforced composites fabricated with different joining methods , 2018, Composite Structures.

[24]  J. Arinez,et al.  Ultrasonic Welding of Carbon Fiber Reinforced Composite With Variable Blank Holding Force , 2018, Journal of Manufacturing Science and Engineering.

[25]  I. F. Villegas,et al.  Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layer , 2018, Composites Part A: Applied Science and Manufacturing.

[26]  P. Lenfeld,et al.  The Effect of Different Heights and Angles of Energy Director on Interface Temperature for Ultrasonic Welding of Thermoplastics , 2018, IOP Conference Series: Materials Science and Engineering.

[27]  A. Al-Obaidi.  Ultrasonic Joining of Metal-Polymer Surfaces , 2018 .

[28]  S. Joshi,et al.  Mechanical and vibration response of insulated hybrid composites , 2018 .

[29]  S. Joshi,et al.  Mode I fracture toughness and fractographic investigation of carbon fibre composites with liquid Methylmethacrylate thermoplastic matrix , 2018 .

[30]  Pei-chung Wang,et al.  Ultrasonic Welding of Carbon Fiber Reinforced Nylon 66 Composite without Energy Director , 2018 .

[31]  S. Joshi,et al.  Enhanced vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system , 2017 .

[32]  Jorge Arinez,et al.  Characterization of weld attributes in ultrasonic welding of short carbon fiber reinforced thermoplastic composites , 2017 .

[33]  Jingjing Li,et al.  Effect of interfacial preheating on welded joints during ultrasonic composite welding , 2017 .

[34]  G. Palardy,et al.  Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development , 2017 .

[35]  X. Tan,et al.  Decomposition of ultrasonically welded carbon fiber/polyamide 66 and its effect on weld quality , 2017, Welding in the World.

[36]  G. Palardy,et al.  On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites , 2017 .

[37]  R. M. Boumbimba,et al.  Glass fibres reinforced acrylic thermoplastic resin-based tri-block copolymers composites: Low velocity impact response at various temperatures , 2017 .

[38]  G. Palardy,et al.  Zero-flow: a novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates , 2016 .

[39]  S. Joshi,et al.  Experimental investigation on suitability of carbon fibre thin plies for racquets , 2016 .

[40]  Yunlong Sheng,et al.  A comparative study of experimental and finite element analysis on submillimeter flaws by laser and ultrasonic excited thermography , 2016, SPIE Commercial + Scientific Sensing and Imaging.

[41]  I. F. Villegas,et al.  On avoiding thermal degradation during welding of high-performance thermoplastic composites to thermoset composites , 2015 .

[42]  Abhay Sharma,et al.  Induction heated tool assisted friction-stir welding (i-FSW): A novel hybrid process for joining of thermoplastics , 2015 .

[43]  R. Benedictus,et al.  A comparative evaluation between flat and traditional energy directors for ultrasonic welding of CF/PPS thermoplastic composites , 2015 .

[44]  A. Maffezzoli,et al.  Fabrication of a thermoplastic matrix composite stiffened panel by induction welding , 2015 .

[45]  I. F. Villegas,et al.  Continuous resistance welding of thermoplastic composites: Modelling of heat generation and heat transfer , 2015 .

[46]  S. Joshi,et al.  Design, Manufacturing and Testing of Filament Wound Composite Risers for Marine and Offshore Applications , 2015 .

[47]  B. Baudrit,et al.  Ultrasonic welding of plasticized PLA films , 2015 .

[48]  I. F. Villegas.  In situ monitoring of ultrasonic welding of thermoplastic composites through power and displacement data , 2015 .

[49]  S. Bolt.  Ultrasonic Plastic Welding of Carbon Fiber Reinforced Polyamide 6 to Aluminium and Steel , 2014 .

[50]  I. F. Villegas,et al.  Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters , 2014 .

[51]  S. Biwa,et al.  Evaluation of interlayer interfacial stiffness and layer wave velocity of multilayered structures by ultrasonic spectroscopy. , 2014, The Journal of the Acoustical Society of America.

[52]  C. Hopmann,et al.  Ultrasonic welding of polyamide—influence of moisture on the process relevant material properties , 2014, Welding in the World.

[53]  Civil Engg,et al.  EXPERIMENTAL STUDY ON ULTRASONIC WELDING OF ALUMINUM SHEET TO COPPER SHEET , 2013 .

[54]  E. A. Bakar,et al.  Determination of Ultrasonic Welding Optimal Parameters for Thermoplastic Material of Manufacturing Products , 2013 .

[55]  D. Eifler,et al.  Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced Polymers , 2013 .

[56]  Harald E.N. Bersee,et al.  Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites , 2013 .

[57]  Anahi Pereira da Costa,et al.  A REVIEW OF WELDING TECHNOLOGIES FOR THERMOPLASTIC COMPOSITES IN AEROSPACE APPLICATIONS DOI 10.5028/jatm.2012.040303912 , 2012 .

[58]  M·J·L·范托勒.  Method for bonding a thermoplastic polymer to a thermosetting polymer component , 2012 .

[59]  Shiro Biwa,et al.  Ultrasonic evaluation of interlayer interfacial stiffness of multilayered structures , 2012 .

[60]  Dietmar Eifler,et al.  Ultrasonic Welding of Hybrid Joints , 2012 .

[61]  V. Patel,et al.  Influence of ultrasonic spot welding on microstructure in a magnesium alloy , 2011 .

[62]  R. Paton,et al.  Morphology of an Interface between Polyetherimide and Epoxy Prepreg , 2011 .

[63]  P. Prangnell,et al.  Mechanisms of joint and microstructure formation in high power ultrasonic spot welding 6111 aluminium automotive sheet , 2010 .

[64]  Xiaodong Wang,et al.  Study on Heating Process of Ultrasonic Welding for Thermoplastics , 2010 .

[65]  I. F. Villegas,et al.  Ultrasonic welding of advanced thermoplastic composites: An investigation on energy‐directing surfaces , 2010 .

[66]  A. Maffezzoli,et al.  Polymer characterization by ultrasonic wave propagation , 2009 .

[67]  Dietmar Eifler,et al.  Ultrasonic Metal Welding of Aluminium Sheets to Carbon Fibre Reinforced Thermoplastic Composites , 2009 .

[68]  R. Rudramoorthy,et al.  Modeling of temperature distribution in ultrasonic welding of thermoplastics for various joint designs , 2007 .

[69]  Harald E.N. Bersee,et al.  Reactive processing of textile fiber-reinforced thermoplastic composites – An overview , 2007 .

[70]  H. Bersee,et al.  Induction welding of thermoplastic composites—an overview , 2006 .

[71]  J. Tsujino,et al.  Frequency Characteristics of Ultrasonic Plastic Welding , 2006 .

[72]  Dong-Hyun Kim,et al.  Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding , 2006 .

[73]  A. Yousefpour,et al.  Fusion Bonding/Welding of Thermoplastic Composites , 2004 .

[74]  D. Grewell,et al.  Plastics and Composites Welding Handbook , 2003 .

[75]  J. Gillespie,et al.  A Comparison of Oven-cured and Induction-cured Adhesively Bonded Composite Joints , 2003 .

[76]  N. Gorbach,et al.  Some Characteristics of Ultrasonic Welding of Polymers , 2002 .

[77]  Shih-Jung Liu,et al.  Optimizing the Weld Strength of Ultrasonically Welded Nylon Composites , 2002 .

[78]  L. Ye,et al.  Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review , 2001 .

[79]  B. K. Fink,et al.  Processing and Characterization of Welded Bonds Between Thermoset and Thermoplastic Composites , 2001 .

[80]  Shih-Jung Liu,et al.  Factors affecting the joint strength of ultrasonically welded polypropylene composites , 2001 .

[81]  C. M. Gilmore.  Advanced Composites Manufacturing By Timothy G. Gutowski , 1998 .

[82]  C. J. Nonhof,et al.  Estimates for process conditions during the ultrasonic welding of thermoplastics , 1996 .

[83]  T. Vu-khanh,et al.  Optimization of the Ultrasonic Welding of PEEK-Carbon Composites , 1996 .

[84]  Timothy G. Gutowski,et al.  Ultrasonic welding of PEEK graphite APC-2 composites , 1989 .

[85]  V. K. Stokes.  Joining methods for plastics and plastic composites: an overview , 1989 .

[86]  Michael Chun-Yung Niu,et al.  Airframe Structural Design: Practical Design Information and Data on Aircraft Structures , 1988 .

[87]  Avraham Benatar,et al.  Ultrasonic Welding of Thermoplastic Composites , 1988 .

[88]  H. Potente.  Ultrasonic welding — Principles & theory , 1984 .

[89]  P. Dawson,et al.  Heating and bonding mechanisms in ultrasonic welding of thermoplastics , 1983 .

[90]  R. Davidson.  THE ULTRASONIC WELDING OF THERMOPLASTICS , 1969 .

[91]  R. K. Kumar,et al.  Investigation and characterization of ultrasonically welded GF/PA6T composites , 2020 .

[92]  K. Debnath,et al.  Analysis of tensile failure load of single-lap green composite specimen welded by high-frequency ultrasonic vibration , 2020 .

[93]  T. Ishikawa,et al.  Shear and tensile joint strengths of carbon fiber-reinforced thermoplastics using ultrasonic welding , 2019, Composites Part A: Applied Science and Manufacturing.

[94]  I. Fernandez Villegas,et al.  Hybrid welding of carbon-fiber reinforced epoxy based composites , 2018 .

[95]  Single-Sided Ultrasonic Welding of CF/Nylon 6 Composite without Energy Directors , 2018 .

[96]  L. L,et al.  Inspection of Weld Quality in Ultrasonic Welding of Carbon Fiber / Polyamide 66 without Energy Directors , 2018 .

[97]  Liang Gao,et al.  Ultrasonic Welding of Polymers , 2018, Confluence of Multidisciplinary Sciences for Polymer Joining.

[98]  R. Rajasekar,et al.  Vibration and Ultrasonic Welding Behaviour of Polymers and Polymer Composites- A Review , 2017 .

[99]  Effects of Preheat Treatment on the Ultrasonic Welding of Carbon Fiber Reinforced Polyamide 66 Composite The mechanical properties , temperature evolutions , and microstructures of ultrasonic welded joints at different preheating temperatures , 2017 .

[100]  Z. X. Liu,et al.  Effect of Moisture on the Ultrasonic Welding of Carbon-Fiber-Reinforced Polyamide 66 Composite , 2017 .

[101]  G. Palardy,et al.  Smart ultrasonic welding of thermoplastic composites , 2016 .

[102]  A. Benatar.  Ultrasonic welding of plastics and polymeric composites , 2015 .

[103]  Seungjae Lee,et al.  Process and Quality Characterization for Ultrasonic Welding of Lithium-Ion Batteries. , 2013 .

[104]  H. J. Yeh,et al.  Ultrasonic welding of medical plastics , 2013 .

[105]  Z. Al-Sarraf.  A study of ultrasonic metal welding , 2013 .

[106]  S. Advani,et al.  Introduction to composites and manufacturing processes , 2012 .

[107]  W. Knapp,et al.  Laser-bonding of long fiber thermoplastic composites for structural assemblies , 2010 .

[108]  Polymers: Characteristics and Compatibility for Ultrasonic Assembly , 2009 .

[109]  Harald E.N. Bersee,et al.  Resistance welding of thermoplastic composites - an overview , 2005 .

[110]  Janet Devine,et al.  Ultrasonic plastics welding basics , 2001 .

[111]  Shih-Jung Liu,et al.  Effects of the shape of the energy director on far‐field ultrasonic welding of thermoplastics , 2000 .

[112]  R. Rudolf,et al.  Welding of high-performance thermoplastic composites , 1999 .

[113]  Timothy G. Gutowski,et al.  Advanced composites manufacturing , 1997 .

[114]  A. Offringa.  Thermoplastic composites—rapid processing applications , 1996 .