Application of dislocation-based constitutive model into research of dynamic mechanical behavior under shock loading

To understand the plastic deformation mechanism of an FCC metal (pure aluminum) under shock loading and describe its dynamic mechanical behavior accurately, a multiscale constitutive model based on the dislocation substructure is developed, which comprehensively considers the controlling mechanisms of dislocation motion and dislocation evolution. Then, the model is extended to the loading of strong shock waves by incorporating the homogeneous nucleated dislocation within the constitutive framework. The model parameters are successfully determined by the normal plate impact experiments with different thicknesses of specimens. Additionally, shock front perturbation decay experiments are performed using a line velocity interferometer system for any reflector, where the modulated surface of the specimen is subjected to a laser-driven loading. Then, the model is applied to reproduce the perturbation decay of shock fronts in experiments. During the post-process of simulated results, the method based on the pressure gradient is used to determine the amplitude and the location of distributed shock fronts. The extended model shows promise as an effective method to figure out the role of strength (shear response) on the evolution of perturbation amplitude.

[1]  V. Prakash,et al.  Dynamic flow stress of pure polycrystalline aluminum: Pressure-shear plate impact experiments and extension of dislocation-based modeling to large strains , 2021 .

[2]  Qiang Wu,et al.  Numerical investigation of the temperature dependence of dynamic yield stress of typical BCC metals under shock loading with a dislocation-based constitutive model , 2020, Mechanics of Materials.

[3]  Xiaojuan Ma,et al.  Yield strength measurement of shock-loaded metal by flyer-impact perturbation method , 2018, Physica B: Condensed Matter.

[4]  R. Austin.  Elastic precursor wave decay in shock-compressed aluminum over a wide range of temperature , 2017 .

[5]  R. Johnson,et al.  Strength and Viscosity Effects on Perturbed Shock Front Stability in Metals. , 2017, Physical review letters.

[6]  T. Vogler.  Shock Wave Perturbation Decay in Granular Materials , 2015, Journal of Dynamic Behavior of Materials.

[7]  Xiantu He,et al.  Advances in the national inertial fusion program of China , 2013 .

[8]  B. Remington,et al.  Multiscale strength (MS) models: their foundation, their successes, and their challenges , 2013 .

[9]  P. Levashov,et al.  Modeling of plasticity and fracture of metals at shock loading , 2013 .

[10]  E. Zaretsky,et al.  Effect of temperature, strain, and strain rate on the flow stress of aluminum under shock-wave compression , 2012 .

[11]  David L. McDowell,et al.  Parameterization of a rate-dependent model of shock-induced plasticity for copper, nickel, and aluminum , 2012 .

[12]  A. Mayer,et al.  Dislocation based high-rate plasticity model and its application to plate-impact and ultra short electron irradiation simulations , 2011 .

[13]  Nathan R. Barton,et al.  A multiscale strength model for extreme loading conditions , 2011 .

[14]  D. McDowell,et al.  A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates , 2011 .

[15]  J. Asay,et al.  Modeling of the elastic precursor behavior and dynamic inelasticity of tantalum under ramp wave loading to 17 GPa , 2010 .

[16]  Zhang Ji-chun,et al.  Measurement on Effective Shear Viscosity Coefficient of Iron under Shock Compression at 100 GPa , 2009 .

[17]  Xiantu He,et al.  Inertial fusion research in China , 2007 .

[18]  M. Meyers,et al.  Material dynamics under extreme conditions of pressure and strain rate , 2005 .

[19]  Dean L. Preston,et al.  Model of plastic deformation for extreme loading conditions , 2003 .

[20]  J. Lindl.  Development of the indirect‐drive approach to inertial confinement fusion and the target physics basis for ignition and gain , 1995 .

[21]  C. M. Lund,et al.  A constitutive model for strain rates from 10−4 to 106 s−1 , 1989 .

[22]  U. F. Kocks,et al.  A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable , 1988 .

[23]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[24]  D. Steinberg,et al.  A constitutive model for metals applicable at high-strain rate , 1980 .

[25]  W. Johnston,et al.  Dislocation Multiplication in Lithium Fluoride Crystals , 1960 .

[26]  G. Leibfried.  Über den Einfluß thermisch angeregter Schallwellen auf die plastische Deformation , 1950 .