Numerical study of effect of oxygen fraction on local entropy generation in a methane-air burner

This study considers numerical simulation of the combustion of methane with air, including oxygen and nitrogen, in a burner and the numerical solution of local entropy generation rate due to high temperature and velocity gradients in the combustion chamber. The effects of equivalence ratio (Φ) and oxygen percentage (γ ) on combustion and entropy generation rates are investigated for different Φ (from 0.5 to 1.0) andγ values (from 10 to 30%). Combustion is simulated for the fuel mass flow rate resulting in the same heat transfer rate (Q)y to the combustion chamber in each case. Numerical calculation of combustion is performed individually for all cases with the use of the Fluent CFD code. Furthermore, a computer program has been developed to calculate the volumetric entropy generation rate and the other thermodynamic parameters numerically by using the results of the calculations performed with the FLUENT code. The predictions show that the increase of Φ (or the decrease of λ) significantly reduces the reaction rate levels. Average temperature in the combustion chamber increases by about 70 and 35% with increase ofγ (from 10 to 30%) and Φ (from 0.5 to 1.0) respectively. With increase ofγ from 10 to 30%, volumetric local entropy generation rate decreases by about 9 and 4% for Φ = 0.5 and 1.0 respectively, while total entropy generation rate decreases exponentially and the merit numbers increase. The ratio of the rates useful energy transfer to irreversibility therefore improves as the oxygen percentage increases

[1]  S. Orszag,et al.  Renormalization group analysis of turbulence. I. Basic theory , 1986 .

[2]  B. S. Yilbas,et al.  Confined swirling jet impingement onto an adiabatic wall , 2003 .

[3]  Gautam Biswas,et al.  Second-Law Analysis of Heat Transfer in Swirling Flow Through a Cylindrical Duct , 1987 .

[4]  Ahmet Z. Sahin,et al.  Entropy generation and pumping power in a turbulent fluid flow through a smooth pipe subjected to constant heat flux , 2002 .

[5]  Bekir Sami Yilbas,et al.  Flow through a protruding bluff body–heat and irreversibility analysis , 2001 .

[6]  Bekir Sami Yilbas,et al.  Local entropy generation in an impinging jet: minimum entropy concept evaluating various turbulence models , 2001 .

[7]  Ramazan Kahraman,et al.  Entropy generation in a rectangular packed duct with wall heat flu x , 1998 .

[8]  Roydon Andrew Fraser,et al.  Thermodynamic analysis of flow and heat transfer inside channel with two parallel plates , 2002 .

[9]  Timothy J. Barth,et al.  The design and application of upwind schemes on unstructured meshes , 1989 .

[10]  A. Sahin,et al.  The effect of variable viscosity on the entropy generation and pumping power in a laminar fluid flow through a duct subjected to constant heat flux , 1999 .

[11]  Zhen-Xiang Gong,et al.  Entropy Generation Minimization , 1996 .

[12]  Ammar Ben Brahim,et al.  Entropy generation in Poiseuille–Benard channel flow , 2003 .

[13]  Bekir Sami Yilbas,et al.  A laminar swirling jet impingement on to an adiabatic wall ‐ Effect of inlet velocity profiles , 2001 .

[14]  A. Sahin,et al.  Entropy generation in turbulent liquid flow through a smooth duct subjected to constant wall temperature , 2000 .

[15]  Ahmet Z. Sahin,et al.  Second Law Analysis of Laminar Viscous Flow Through a Duct Subjected to Constant Wall Temperature , 1998 .

[16]  Bekir Sami Yilbas,et al.  Second law analysis of a swirling flow in a circular duct with restriction , 1999 .

[17]  D. Spalding.  Mixing and chemical reaction in steady confined turbulent flames , 1971 .

[18]  A. Bejan.  Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes , 1996 .

[19]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[20]  Roydon Andrew Fraser,et al.  The second law analysis in fundamental convective heat transfer problems , 2003 .

[21]  A. Sahin,et al.  A second law comparison for optimum shape of duct subjected to constant wall temperature and laminar flow , 1998 .