Issues associated with the design, fabrication and testing of a crystalline silicon ring gyroscope with electromagnetic actuation and sensing

The design of a single-crystal silicon ring with electromagnetic actuation and sensing, for the purpose of producing a gyroscope, is presented which takes into account the anisotropic nature of silicon. Ring structures are fabricated using a reactive ion etching process which is compatible with CMOS fabrication technology. Three methods of reducing electrical coupling between the drive and the sense are considered. The modes of vibration of the ring are measured as a function of frequency and drive amplitude and interpreted in terms of the modes of an ideal structure. Unwanted asymmetry in the ring structure resulting from the fabrication process is responsible for both a frequency mismatch and a large mechanical coupling between the principal modes of the ring and this limits the response as a gyroscope. Improvements to the fabrication of the ring are identified.

[1]  R V Jones.  Genius in Engineering , 1986 .

[2]  M. Esashi,et al.  Silicon resonant angular rate sensor using electromagnetic excitation and capacitive detection , 1995 .

[3]  Jan Soderkvist.  Micromachined vibrating gyroscopes , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[4]  N. F. de Rooij,et al.  A silicon micromachined tuning fork gyroscope , 1996 .

[5]  J. S. Burdess,et al.  A monolithic silicon gyroscope capable of sensing about three axes simultaneously , 1996 .

[6]  M. W. Putty.  A Maicromachined vibrating ring gyroscope , 1994 .

[7]  D. L. Thomas.  Dynamics of rotationally periodic structures , 1979 .

[8]  D. O. King,et al.  Micromachining In SOI , 1997 .

[9]  K. Najafi,et al.  Design and fabrication of high-performance polysilicon vibrating ring gyroscope , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[10]  J. Burdess.  The Dynamics of a Thin Piezoelectric Cylinder Gyroscope , 1986 .

[11]  David Wood,et al.  Vibrating silicon diaphragm micromechanical gyroscope , 1995 .

[12]  M.C.L. Ward,et al.  Deep dry etching of SOI for silicon micromachined structures , 1997, 1997 IEEE International SOI Conference Proceedings.

[13]  Bernd Folkmer,et al.  A new silicon rate gyroscope , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.