Preparation and characterization of stearic acid/expanded graphite composites as thermal energy storage materials

Stearic acid/expanded graphite composites with different mass ratios were prepared by absorbing liquid stearic acid into the expanded graphite. In the composite materials, the stearic acid was used as the phase change material for thermal energy storage, and the expanded graphite acted as the supporting material. Fourier transformation infrared spectroscopy, X-ray diffraction, scanning electron microscopy and thermal diffusivity measurement were used to determine the chemical structure, crystalline phase, microstructure and thermal diffusivity of the composites, respectively. The thermal properties and thermal stability were investigated by differential scanning calorimetry and thermogravimetric analysis. The thermal analysis results indicated that the materials exhibited the same phase transition characteristics as the stearic acid and their latent heats were approximately the same as the values calculated based on the weight fraction of the stearic acid in the composites. The microstructural analysis results showed that the stearic acid was well absorbed in the porous network of the expanded graphite, and there was no leakage of the stearic acid from the composites even when it was in the molten state.

[1]  R. L. Sawhney,et al.  Solar water heaters with phase change material thermal energy storage medium: A review , 2009 .

[2]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[3]  A. Sayigh,et al.  Some fatty acids as phase-change thermal energy storage materials , 1994 .

[4]  Hui Li,et al.  Preparation and characterization of nano-encapsulated n-tetradecane as phase change material for thermal energy storage , 2009 .

[5]  Ahmet Sarı,et al.  Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .

[6]  A. Sari,et al.  Lauric and palmitic acids eutectic mixture as latent heat storage material for low temperature heating applications , 2005 .

[7]  C. Doetsch,et al.  Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications , 2009 .

[8]  M. N. Azpiazu,et al.  Heat recovery from a thermal energy storage based on the Ca(OH) 2 /CaO cycle , 2003 .

[9]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[10]  Marcel Lacroix,et al.  A hybrid thermal energy storage system for managing simultaneously solar and electric energy , 2006 .

[11]  Ye Hong,et al.  Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material , 2000 .

[12]  H. Inaba,et al.  Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .

[13]  A. Sari,et al.  Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage , 2009 .

[14]  A. Sari,et al.  Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material , 2007 .

[15]  Takayuki Watanabe,et al.  The capric and lauric acid mixture with chemical additives as latent heat storage materials for cooling application , 2002 .

[16]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[17]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[18]  Jinyue Yan,et al.  Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitride , 2009 .

[19]  A. Sari,et al.  Fatty acid/poly(methyl methacrylate) (PMMA) blends as form-stable phase change materials for latent heat thermal energy storage , 2008 .

[20]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[21]  Min Xiao,et al.  Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity , 2002 .

[22]  A. Sari.  Thermal reliability test of some fatty acids as PCMs used for solar thermal latent heat storage applications , 2003 .

[23]  Fredrik Setterwall,et al.  Phase transition temperature ranges and storage density of paraffin wax phase change materials , 2004 .

[24]  S. C. Solanki,et al.  Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .

[25]  Yi Jiang,et al.  Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .

[26]  Ibrahim Dincer,et al.  On thermal energy storage systems and applications in buildings , 2002 .

[27]  G. Song,et al.  Preparation and characterization of flame retardant form-stable phase change materials composed by EPDM, paraffin and nano magnesium hydroxide , 2010 .