Development of high precision mechanical probes for coordinate measuring machines

• A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers.

[1]  H. Dubbel.  Taschenbuch für den maschinenbau , 1924 .

[2]  J. Barbera,et al.  Contact mechanics , 1999 .

[3]  István Szabó.  Höhere Technische Mechanik , 1956 .

[4]  Ghj Guido Florussen.  Accuracy analysis of multi-axis machines by 3D length measurements , 2002 .

[5]  Sfcl Serge Wetzels.  Laser based displacement calibration with nanometre accuracy , 1998 .

[6]  J. S. Przemieniecki.  Theory of matrix structural analysis , 1985 .

[7]  Heinrich Schwenke,et al.  Opto-tactile Sensor for 2D and 3D Measurement of Small Structures on Coordinate Measuring Machines , 2001 .

[8]  Phj Piet Schellekens,et al.  Design of a High-Precision 3D-Coordinate Measuring Machine , 1998 .

[9]  M. Visscher,et al.  Optical profilometry and its application to mechanically inaccessible surfaces Part I: Principles of focus error detection , 1994 .

[10]  W T Welford,et al.  Principles of Optical Disc Systems , 1986 .

[11]  Phj Piet Schellekens,et al.  Development of a 2D probing system with nanometer resolution , 1997 .

[12]  Han Haitjema,et al.  A silicon-etched probe for 3-D coordinate measurements with an uncertainty below 0.1 μm , 2001, IEEE Trans. Instrum. Meas..

[13]  J. Wortman,et al.  Young's Modulus, Shear Modulus, and Poisson's Ratio in Silicon and Germanium , 1965 .

[14]  H Han Haitjema,et al.  Development of a Silicon-based Nanoprobe System for 3-D Measurements , 2001 .

[15]  Cei.  International vocabulary of basic and general terms in metrology = vocabulaire international des termes fondamentaux et généraux de métrologie , 1993 .

[16]  Willem Brouwer,et al.  Matrix Methods in Optical Instrument Design , 1964 .

[17]  Mmpa Marc Vermeulen,et al.  Design for precision : current status and trends , 1998 .

[18]  G. V. Chester,et al.  Solid State Physics , 2000 .

[19]  David L. Trumper,et al.  Dynamics and Control of the UNCC/MIT Sub-Atomic Measuring Machine , 2001 .

[20]  Pcjn Nick Rosielle,et al.  Design of a kinematic coupling for precision applications , 1997 .

[21]  H Han Haitjema,et al.  Modeling and verifying non-linearities in heterodyne displacement interferometry , 2002 .

[22]  Mmpa Marc Vermeulen.  High-precision 3D-coordinate measuring machine : design and prototype-development , 1999 .

[23]  S. Sartori,et al.  Geometric Error Measurement and Compensation of Machines , 1995 .

[24]  F. Zhu.  Development of Capacitive Position Transducers through a Mechatronic Approach , 1992 .

[25]  Andrew Lewis,et al.  Design for a compact high-accuracy CMM , 1999 .

[26]  Myron A. Jeppesen.  Young's Modulus , 1955 .

[27]  W. Graham Richards,et al.  Art of electronics , 1983, Nature.

[28]  Phj Piet Schellekens,et al.  Development of a fast mechanical probe for coordinate measuring machines , 1998 .

[29]  H Han Haitjema,et al.  Calibration of displacement sensors up to 300 µm with nanometre accuracy and direct traceability to a primary standard of length , 2000 .

[30]  M. F.,et al.  Bibliography , 1985, Experimental Gerontology.

[31]  H Han Haitjema,et al.  Design and calibration of a parallel-moving displacement generator for nano-metrology , 1998 .

[32]  John S. Villarrubia,et al.  Grating pitch measurements with the molecular measuring machine , 1999, Optics & Photonics.

[33]  Takashi Miyoshi,et al.  Development of The Nano-CMM Probe based on Laser Trapping Technology , 1999 .

[34]  K.E. Petersen,et al.  Silicon as a mechanical material , 1982, Proceedings of the IEEE.