Numerical simulation of a solar domestic hot water system

An innovative transient numerical model is presented for the simulation of a solar Domestic Hot Water (DHW) system. The solar collectors have been simulated by using a zerodimensional analytical model. The temperature distributions in the heat transfer fluid and in the water inside the tank have been evaluated by one-dimensional models. The reversion elimination algorithm has been used to include the effects of natural convection among the water layers at different heights in the tank on the thermal stratification. A finite difference implicit scheme has been implemented to solve the energy conservation equation in the coil heat exchanger, and the energy conservation equation in the tank has been solved by using the finite difference Euler implicit scheme. Energy conservation equations for the solar DHW components models have been coupled by means of a home-made implicit algorithm. Results of the simulation performed using as input data the experimental values of the ambient temperature and the solar irradiance in a summer day are presented and discussed.

[1]  S. Rittidech,et al.  Experimental study of the performance of a solar collector by closed-end oscillating heat pipe (CEOHP) , 2007 .

[2]  Amir Faghri,et al.  Performance characteristics of cylindrical heat pipes with multiple heat sources , 2011 .

[3]  W. Wang,et al.  Analysis of flow and heat transfer characteristics of an asymmetrical flat plate heat pipe , 1992 .

[4]  Abdelmajid Jemni,et al.  Effect of the Heat Pipe Adiabatic Region. , 2014, Journal of heat transfer.

[5]  Ali A. Dehghan,et al.  Thermal performance behavior of a domestic hot water solar storage tank during consumption operation , 2011 .

[6]  A. Bejan,et al.  Heat transfer handbook , 2003 .

[7]  Antonio Lecuona,et al.  Flat plate thermal solar collector efficiency: Transient behavior under working conditions. Part I: Model description and experimental validation , 2011 .

[8]  Amir Faghri,et al.  A network thermodynamic analysis of the heat pipe , 1998 .

[9]  William A. Beckman,et al.  Transient considerations of flat-plate solar collectors , 1974 .

[10]  Amir Faghri,et al.  Heat Pipe Science And Technology , 1995 .

[11]  Xudong Zhao,et al.  Developing a theoretical model to investigate thermal performance of a thin membrane heat-pipe solar collector , 2005 .

[12]  J. Cadafalch,et al.  A detailed numerical model for flat-plate solar thermal devices , 2009 .

[13]  John L. Wright,et al.  Single- and multi-tank energy storage for solar heating systems: fundamentals , 2002 .

[14]  R. Kempers,et al.  Effect of number of mesh layers and fluid loading on the performance of screen mesh wicked heat pipes , 2006 .

[15]  Vassilis Belessiotis,et al.  A new heat-pipe type solar domestic hot water system , 2002 .

[16]  V. Morgan.  The Overall Convective Heat Transfer from Smooth Circular Cylinders , 1975 .

[17]  S. Filippeschi,et al.  On periodic two-phase thermosyphons operating against gravity , 2006 .

[18]  T. Unny,et al.  Free convective heat transfer across inclined air layers , 1976 .

[19]  Christian Inard,et al.  Experimental and numerical study of thermal stratification in a mantle tank of a solar domestic hot water system , 2007 .

[20]  Elimar Frank,et al.  A Transient Immersed Coil Heat Exchanger Model , 2013 .

[21]  John Goldak,et al.  Three-dimensional numerical analysis of heat and mass transfer in heat pipes , 2007 .

[22]  Antonio Lecuona,et al.  Domestic hot water consumption vs. solar thermal energy storage: The optimum size of the storage tank , 2012 .

[23]  S. D. Probert,et al.  Heat-transfer correlations for an immersed finned heat-exchanger coil transferring heat from a hot-water store , 1993 .

[24]  Antonio Lecuona,et al.  Flat plate thermal solar collector efficiency: Transient behavior under working conditions part II: Model application and design contributions , 2011 .