3D printing: a useful tool for the fabrication of artificial electromagnetic (EM) medium

Purpose Artificial electromagnetic (EM) medium and devices are designed with integrated micro- and macro-structures depending on the EM transmittance performance, which is difficult to fabricate by the conventional processes. Three-dimensional (3D) printing provides a new solution for the delicate artificial EM medium. This paper aims to first review the applications of 3D printing in the fabrication of EM medium briefly, mainly focusing on photonic crystals, metamaterials and gradient index (GRIN) devices. Then, a new design and fabrication strategy is proposed for the EM medium based on the 3D printing process, which was verified by the implementation of a 3D 90o Eaton lens based on GRIN metamaterials. Design/methodology/approach A new design and manufacturing strategy driven by the physical (EM transmittance) performance is proposed to illustrate the realization procedures of EM medium based device with controllable micro- and macro-structures. Stereolithography-based 3D printing process is used to obtain the designed EM device, an GRIN Eaton lens. The EM transmittance of the Eaton lens was validated experimentally and by simulation. Findings A 3D 90o Eaton lens was realized based on GRIN metamaterials structure according to the proposed design and manufacturing strategy, which had the broadband (12-18 GHz) and low loss characteristic. The feasibility of 3D printing for the artificial EM medium and GRIN devices has been verified for the further real applications in the industries. Originality/value The applications of 3D printing in artificial EM medium and devices were systematically reviewed. A new design strategy driven by physical performance for the EM device was proposed and validated by the firstly 3D printed 3D Eaton lens.

[1]  J. Eaton,et al.  On spherically symmetric lenses , 1952 .

[2]  Wei Cao,et al.  Hiding a Realistic Object Using a Broadband Terahertz Invisibility Cloak , 2011, Scientific reports.

[3]  Steven G. Johnson,et al.  Photonic Crystals: Molding the Flow of Light , 1995 .

[4]  David R. Smith,et al.  Thin low-loss dielectric coatings for free-space cloaking. , 2013, Optics letters.

[5]  Xiaoyong Tian,et al.  Effective fabrication method of 3D ceramic photonic crystals with diamond structure , 2012 .

[6]  A. Danner,et al.  Lossless design of an Eaton lens and invisible sphere by transformation optics with no bandwidth limitation , 2009, 2009 Conference on Lasers and Electro-Optics and 2009 Conference on Quantum electronics and Laser Science Conference.

[7]  Soshu Kirihara,et al.  Fabrication of TiO2–SiO2 Photonic Crystals with Diamond Structure , 2005 .

[8]  M. Wanke,et al.  Laser Rapid Prototyping of Photonic Band-Gap Microstructures , 1997, Science.

[9]  Stefan Linden,et al.  Negative-index bianisotropic photonic metamaterial fabricated by direct laser writing and silver shadow evaporation. , 2009, Optics letters.

[10]  William J. Chappell,et al.  High‐Frequency Electromagnetic Bandgap Structures via Indirect Solid Freeform Fabrication , 2004 .

[11]  S. Linden,et al.  Photonic metamaterials by direct laser writing and silver chemical vapour deposition. , 2008, Nature materials.

[12]  Yicheng Lu,et al.  3‐D photonic bandgap structures in the microwave regime by fused deposition of multimaterials , 2002 .

[13]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.

[14]  J. Pendry,et al.  Three-Dimensional Invisibility Cloak at Optical Wavelengths , 2010, Science.

[15]  Tim Caffrey,et al.  Wohlers report 2013 : additive manufacturing and 3D printing state of the industry : annual worldwide progress report , 2013 .

[16]  J. Joannopoulos,et al.  Photonic crystals: putting a new twist on light , 1997, Nature.

[17]  Dichen Li,et al.  Free-space carpet-cloak based on gradient index photonic crystals in metamaterial regime , 2012 .

[18]  Yang Hao,et al.  Fabrication of electromagnetic crystals by extrusion freeforming , 2008 .

[19]  J. W. Allen,et al.  Design and fabrication of an RF GRIN lens using 3D printing technology , 2013, Photonics West - Optoelectronic Materials and Devices.

[20]  Soshu Kirihara,et al.  Fabrication of Three‐Dimensional Micro Photonic Crystals of Resin‐Incorporating TiO2 Particles and their Terahertz Wave Properties , 2007 .

[21]  Xiaoyong Tian,et al.  All-dielectric three-dimensional broadband Eaton lens with large refractive index range , 2014 .

[22]  Xiaoyong Tian,et al.  Broadband gradient refractive index planar lens based on a compound liquid medium , 2012 .

[23]  Haiqing Yin,et al.  Fabrication of Ceramic Photonic Crystals with Diamond Structure for Microwave Applications , 2004 .

[24]  R. K. Luneburg,et al.  Mathematical Theory of Optics , 1966 .