High-brightness distributed-Bragg-reflector tapered diode lasers: pushing your application to the next level

We demonstrate monolithic distributed-Bragg-reflector tapered diode lasers having an output power up to 12 W, a small spectral width of below ▵λ<10 pm and a beam quality close to the diffraction limit. This results in a brightness close to 1 GWcm-2sr-1. Due to these excellent electro-optical characteristics we achieved visible laser light up to P=1.8 W in a single-path second harmonic generation experiment. This allowed us to develop compact Watt-class (P=1.1 W) visible laser modules having an excellent beam quality (M²<3) with a narrow spectrum (▵λ<30 pm). The entire device is integrated on a micro-optical bench with a volume below 20 cm³. In another application we demonstrate for the first time a femtosecond gigahertz SESAM-modelocked Yb:KGW laser. Such a laser system benefits from the small spectral emission and the focusability of the developed diode laser. A record peak power of 3.9 kW was achived. At the repetition rate of 1 GHz, 281 fs pulses with an average output power of 1.1 W were generated. This Yb:KGW laser has a high potential for stable frequency comb generation.

[1]  D. Feise,et al.  High-Power DBR-Tapered Laser at 980 nm for Single-Path Second Harmonic Generation , 2009, IEEE Journal of Selected Topics in Quantum Electronics.

[2]  R. Poprawe,et al.  Manufacturing with novel high-power diode lasers , 2000, IEEE Journal of Selected Topics in Quantum Electronics.

[3]  H. Qi,et al.  980-nm master oscillator power amplifiers with nonabsorbing mirrors , 1999, IEEE Photonics Technology Letters.

[4]  K. Paschke,et al.  Beam Properties of 980-nm Tapered Lasers With Separate Contacts: Experiments and Simulations , 2009, IEEE Journal of Quantum Electronics.

[5]  Katrin Paschke,et al.  High power single mode 980nm DBR tapered diode lasers with integrated sixth order surface gratings based on simplified fabrication process , 2006, SPIE Photonics Europe.

[6]  Ursula Keller,et al.  Soliton mode-locking with saturable absorbers , 1996 .

[7]  D. Welch,et al.  Operating characteristics of a high-power monolithically integrated flared amplifier master oscillator power amplifier , 1993 .

[8]  Alexander Sahm,et al.  1 W at 490 nm on a compact micro-optical bench by single-pass second harmonic generation , 2010, LASE.

[9]  Christhard Deter,et al.  High-power laser projection displays , 2001, IS&T/SPIE Electronic Imaging.

[10]  S. O'Brien,et al.  2.2-W continuous-wave diffraction-limited monolithically integrated master oscillator power amplifier at 854 nm , 1997, IEEE Photonics Technology Letters.

[11]  Günter Steinmeyer,et al.  Carrier-envelope offset phase control: A novel concept for absolute optical frequency measurement and ultrashort pulse generation , 1999 .

[12]  U. Keller,et al.  Q-switching stability limits of continuous-wave passive mode locking , 2001 .

[13]  Katrin Paschke,et al.  Experimental and numerical study of Distributed-Bragg-Reflector tapered lasers , 2010 .

[14]  U. Keller,et al.  Self-referencable frequency comb from a 170-fs, 1.5-μm solid-state laser oscillator , 2010 .

[15]  Katrin Paschke,et al.  Diode-pumped gigahertz femtosecond Yb:KGW laser with a peak power of 3.9 kW. , 2010, Optics express.

[16]  S. Diddams,et al.  Octave-spanning Ti:sapphire laser with a repetition rate >1 ghz for optical frequency measurements and comparisons. , 2006, Optics letters.

[17]  Katrin Paschke,et al.  12W high-brightness single-frequency DBR tapered diode laser , 2008 .

[18]  Katrin Paschke,et al.  Beam quality dependent SHG using edge-emitting lasers and a 50 mm bulk PPLN crystal , 2009, LASE.