Precision fabrication of EUVL programmed defects with helium ion beam lithography

The availability of metrology solutions, one of the critical factors to drive leading-edge semiconductor devices and processes, can be confronted with difficulties in the advanced nodes. For developing new metrology solutions, highquality test structures fabricated at specific sizes are needed. Electron-beam direct-write lithography has been utilized to manufacture such samples. However, it can encounter significant-resolution difficulties and require complicated process optimization in sub-10-nm nodes. This study investigates the feasibility and patterning control of metrology test structure fabrication by helium-ion-beam direct-write lithography (HIBDWL). Features down to IRDS 1.5-nm node are resolvable without needing any resolution enhancement technique from the lithography simulation. Further, patterns beyond 1.5-nm node can be achievable with the help of proximity effect correction technique. Preliminary results of simulation demonstrate that HIBDWL can be a promising alternative for fabricating programmed defects (PDs) and test structure to develop advanced metrology solutions in sub-7-nm nodes.

[1]  Susumu Iida,et al.  Standard wafer with programed defects to evaluate the pattern inspection tools for 300-mm wafer fabrication for 7-nm node and beyond , 2019, Journal of Micro/Nanolithography, MEMS, and MOEMS.

[2]  Chun-Hung Liu,et al.  Electron-beam proximity effect model calibration for fabricating scatterometry calibration samples , 2012, Advanced Lithography.

[3]  John G. Hartley,et al.  Patterning of defect arrays with e-beam lithography used to develop a high throughput e-beam defect inspection tool , 2015 .

[4]  J. Ziegler,et al.  SRIM – The stopping and range of ions in matter (2010) , 2010 .

[5]  Edward A. Rietman,et al.  Using a neural network to proximity correct patterns written with a Cambridge electron beam microfabricator 10.5 lithography system , 1990 .

[6]  Soo-Young Lee,et al.  Dose, shape, and hybrid modifications for PYRAMID in electron beam proximity effect correction , 1997 .

[7]  Moshe Preil.  Patterning challenges in the sub-10 nm era , 2016, Advanced Lithography.

[8]  Peter De Bisschop.  Stochastic printing failures in extreme ultraviolet lithography , 2018 .

[9]  Nicholas P. Economou,et al.  Helium ion microscope: A new tool for nanoscale microscopy and metrology , 2006 .

[10]  Peter De Bisschop,et al.  Stochastic printing failures in extreme ultraviolet lithography , 2018 .

[11]  Wen‐Di Li,et al.  Combined helium ion beam and nanoimprint lithography attains 4 nm half-pitch dense patterns , 2012 .

[12]  Kuen-Yu Tsai,et al.  Model-based proximity effect correction for helium ion beam lithography , 2018, Advanced Lithography.

[13]  Noel C. MacDonald,et al.  Fast proximity effect correction: An extension of PYRAMID for circuit patterns of arbitrary size , 1992 .

[14]  K. Berggren,et al.  Modeling the point-spread function in helium-ion lithography. , 2012, Scanning.

[15]  Chun-Hung Liu,et al.  Fabrication of metrology test structures with helium ion beam direct write , 2017, Advanced Lithography.