A Framework for Vibration Attenuation in Traffic Mast-Arm Structures under Wind Loads

Traffic signals and information signs play a vivid role in guiding drivers on highways and urban roads, to maintain safe travel. For this reason, it is crucial to ascertain the functionality of signal support structures. This paper lies the foundation for a fully computational framework to model and attenuate wind-induced vibrations in traffic lighting structures by using computational fluid dynamics (CFD) simulations & dynamic analysis. Dependence of flow pattern and aerodynamic loads on Reynolds number reveals the importance of full-scale CFD with Large Eddy Simulation for mast arm structures. By employing available weights of lighting boxes, distributed tuned mass dampers were created. The results obtained show that distributed tuned lighting boxes are effective devices for vibration suppression. In addition, damping enhancement can significantly reduce vibration-induced stresses, and hence extend the fatigue life with promises to reduce the cost of building new structures and improve the safety of the traveling public. The procedure followed for creating time histories of wind loads integrated with finite element modeling is useful for the investigation of other vibration lessening techniques.

[1]  Genda Chen,et al.  Fatigue Assessment of Traffic Signal Mast Arms Based on Field Test Data Under Natural Wind Gusts , 2001 .

[2]  Aly Mousaad Aly,et al.  Vibration attenuation in high-rise buildings to achieve system-level performance under multiple hazards , 2019, Engineering Structures.

[3]  S. L. Li,et al.  A Novel Test Method for Aerodynamic Coefficient Measurements of Structures Using Wind Generated by a Moving Vehicle , 2019, Experimental Techniques.

[4]  A. Aly,et al.  Vibration attenuation in wind turbines: A proposed robust pendulum pounding TMD , 2021 .

[5]  Chris Letchford,et al.  Wind-induced vibration of a traffic-signal-support structure with cantilevered tapered circular mast arm , 2010 .

[6]  Aly Mousaad Aly,et al.  Open-jet boundary-layer processes for aerodynamic testing of low-rise buildings , 2017 .

[7]  Robert J. Dexter,et al.  FATIGUE-RESISTANT DESIGN OF CANTILEVERED SIGNAL, SIGN, AND LIGHT SUPPORTS , 1998 .

[8]  Jean-Pierre Bertoglio,et al.  Assessment of the vortex method for Large Eddy Simulation inlet conditions , 2006 .

[9]  Aly Mousaad Aly,et al.  Vibration control in wind turbines for performance enhancement: A comparative study , 2016 .

[10]  Mohammadreza Vafaei,et al.  Vibration Mitigation of Structures through TLCD with Embedded Baffles , 2017, Experimental Techniques.

[11]  Bora Gencturk,et al.  High-cycle fatigue performance of high-mast illumination pole bases with pre-existing cracks , 2017 .

[12]  Richard Christenson,et al.  Field Testing of Signal Head Vibration Absorber to Reduce Fatigue in Wind-Excited Traffic Signal Support Structures , 2014 .

[13]  B. Gjerek,et al.  A novel experimental setup for multiparameter aeroelastic wind tunnel tests , 2014, Experimental Techniques.

[14]  J. Smagorinsky,et al.  GENERAL CIRCULATION EXPERIMENTS WITH THE PRIMITIVE EQUATIONS , 1963 .

[15]  Alberto Zasso,et al.  Dynamics and Control of High-Rise Buildings under Multidirectional Wind Loads , 2011 .

[16]  Maria Q. Feng,et al.  Vibration Control of Tall Buildings Using Mega Subconfiguration , 1995 .

[17]  Fahim Sadek,et al.  Discussion: Vibration Control of Tall Buildings Using Mega Subconfiguration , 1997 .

[18]  Ronald A. Cook,et al.  DAMPING OF CANTILEVERED TRAFFIC SIGNAL STRUCTURES , 2001 .

[19]  M. Hebdon,et al.  Mast Arm Monitoring via Traffic Camera Footage: A Pixel-Based Modal Analysis Approach , 2021, Experimental Techniques.

[20]  H. R. Hamilton,et al.  INCREASED DAMPING IN CANTILEVERED TRAFFIC SIGNAL STRUCTURES , 2000 .

[21]  Aly Mousaad Aly,et al.  Hurricane Hazard Mitigation in Traffic Light Support Structures , 2016 .

[22]  P. Spalart,et al.  A New Version of Detached-eddy Simulation, Resistant to Ambiguous Grid Densities , 2006 .

[23]  Aly Mousaad Aly,et al.  Proposed approach for determination of tributary areas for scattered pressure taps , 2013 .

[24]  Elsa Caetano,et al.  A vision system for vibration monitoring of civil engineering structures , 2011 .

[25]  P. Reynolds,et al.  A Common Framework for Tuned and Active Mass Dampers: Application to a Two-Storey Building Model , 2021, Experimental Techniques.

[26]  Martin Alexander Eder,et al.  An Improved Sub-component Fatigue Testing Method for Material Characterization , 2018, Experimental Techniques.

[27]  Aly Mousaad Aly,et al.  Proposed robust tuned mass damper for response mitigation in buildings exposed to multidirectional wind , 2014 .

[28]  J Juozaitis,et al.  Behaviour of masts subjected to action of wind load , 1998 .

[29]  Richard Christenson,et al.  Reducing Fatigue in Wind-Excited Traffic Signal Support Structures using Smart Damping Technologies , 2011 .

[30]  Aly Mousaad Aly,et al.  Atmospheric boundary layer simulation in a new open-jet facility at LSU: CFD and experimental investigations , 2017 .

[31]  C. K. Madheswaran,et al.  Development of Retrofitting Technique for Seismically Vulnerable Open Ground Storey Reinforced Concrete Buildings , 2021, Experimental Techniques.

[32]  H. S. Monir,et al.  A modified friction damper for diagonal bracing of structures , 2013 .

[33]  Stanislav Pospíšil,et al.  Experimental Set-Up for Advanced Aeroelastic Tests on Sectional Models , 2016, Experimental Techniques.

[34]  A. Aly,et al.  Peak pressures on low rise buildings: CFD with LES versus full scale and wind tunnel measurements , 2020 .

[35]  Vincenzo Piluso,et al.  Experimental analysis of beam-to-column joints equipped with sprayed aluminium friction dampers , 2018, Journal of Constructional Steel Research.

[36]  Jay A. Puckett,et al.  Damping in Cantilevered Traffic Signal Structures under Forced Vibration , 2003 .

[37]  Ronald A. Cook,et al.  MECHANICAL DAMPING SYSTEMS FOR TRAFFIC SIGNAL MAST ARMS , 1998 .

[38]  Alberto Zasso,et al.  On the dynamics of a very slender building under winds: response reduction using MR dampers with lever mechanism , 2011 .

[39]  Aly Mousaad Aly,et al.  Proposed Theory of Semiactive Gains for Smart Dampers in MDOF Systems , 2019 .

[40]  C. D. Van Karsen,et al.  Comparative modal tests of a violin , 2013, Experimental Techniques.

[41]  J. W. Smith,et al.  Vibration of Structures: Applications in civil engineering design , 1988 .

[42]  John B. Mander,et al.  Damage avoidance solution to mitigate wind-induced fatigue in steel traffic support structures , 2017 .