Chemical and structural investigation of high-resolution patterning with HafSO(x).

High-resolution transmission electron microscopy (TEM) imaging and energy-dispersive X-ray spectroscopy (EDS) chemical mapping have been used to examine key processing steps that enable sub-20-nm lithographic patterning of the material Hf(OH)4-2x-2y(O2)x(SO4)y·qH2O (HafSOx). Results reveal that blanket films are smooth and chemically homogeneous. Upon exposure with an electron beam, the films become insoluble in aqueous tetramethylammonium hydroxide [TMAH(aq)]. The mobility of sulfate in the exposed films, however, remains high, because it is readily exchanged with hydroxide from the TMAH(aq) solution. Annealing the films after soaking in TMAH(aq) results in the formation of a dense hafnium hydroxide oxide material that can be converted to crystalline HfO2 with a high electron-beam dose. A series of 9 nm lines is written with variable spacing to investigate the cross-sectional shape of the patterned lines and the residual material found between them.

[1]  Michael A. Henderson,et al.  The Interaction of Water with Solid Surfaces: Fundamental Aspects Revisited , 2002 .

[2]  Wei Chen,et al.  Fabrication of 5–7 nm wide etched lines in silicon using 100 keV electron‐beam lithography and polymethylmethacrylate resist , 1993 .

[3]  S. Förster,et al.  Activation and isomerization of n-butane on sulfated zirconia model systems--an integrated study across the materials and pressure gaps. , 2007, Physical chemistry chemical physics : PCCP.

[4]  Yasuo Takahashi,et al.  Three-dimensional siloxane resist for the formation of nanopatterns with minimum linewidth fluctuations , 1998 .

[5]  Bruce W. Smith,et al.  Photopatternable inorganic hardmask , 2010 .

[6]  J. Stowers,et al.  High resolution, high sensitivity inorganic resists , 2009 .

[7]  Christoph Hohle,et al.  Evaluation of direct patternable inorganic spin-on hard mask materials using electron beam lithography , 2012 .

[8]  A. Broers,et al.  Electron beam lithography-Resolution limits , 1996 .

[9]  Christophe Vieu,et al.  Electron beam lithography: resolution limits and applications , 2000 .

[10]  Douglas A. Keszler,et al.  Solution‐Processed HafSOx and ZircSOx Inorganic Thin‐Film Dielectrics and Nanolaminates , 2007 .

[11]  C. Peden,et al.  Interaction of D2O with CeO2(001) Investigated by Temperature-Programmed Desorption and X-ray Photoelectron Spectroscopy , 1999 .

[12]  Hiroshi Ito.  Chemical amplification resists for microlithography , 2005 .

[13]  Alan J. Telecky,et al.  In‐situ characterization of aqueous‐based hafnium oxide hydroxide sulfate thin films , 2014 .

[14]  Markos Trikeriotis,et al.  Development of an inorganic photoresist for DUV, EUV, and electron beam imaging , 2010, Advanced Lithography.

[15]  C. W. Hagen,et al.  Resists for sub-20-nm electron beam lithography with a focus on HSQ: state of the art , 2009, Nanotechnology.

[16]  M. Isaacson,et al.  High Resolution Electron Beam Lithography Using ZEP-520 and KRS Resists at Low Voltage , 1996 .

[17]  H. Matsuhashi,et al.  The surface structure of sulfated zirconia : Studies of XPS and thermal analysis , 2006 .

[18]  Masaya Notomi,et al.  Quantum Wire Fabrication by E-Beam Elithography Using High-Resolution and High-Sensitivity E-Beam Resist ZEP-520 , 1992 .

[19]  M. Z. R. Khan,et al.  Spin-coatable HfO2 resist for optical and electron beam lithographies , 2010 .

[20]  Yasin Ekinci,et al.  Evaluation of EUV resist performance with interference lithography towards 11 nm half-pitch and beyond , 2013, Advanced Lithography.

[21]  Michael Hatzakis,et al.  High-resolution positive resists for electron-beam exposure , 1968 .