Investigations on the Energy Efficiency of Stratified Air Distribution Systems with Different Diffuser Layouts

This paper investigated the influence of diffuser layouts on the energy performance of stratified air distribution systems (STRAD). The energy saving potentials of STRAD systems are theoretically analyzed. The cooling coil load of a STRAD system is proportion to the return air temperature, while inversely proportional to the exhaust air temperature. Based on that, numerical studies are conducted for the applications of STRAD systems in three typical building space types. Two evaluation indices are developed to assess the energy performance of STRAD systems. The simulation results demonstrated that further energy saving could be achieved by keeping the exhaust grille at ceiling level and decreasing the height of return grille. Therefore, in order to optimize the energy saving capacity of STRAD systems, the return grille is recommended to be located as low as possible, whilst paying special attention on the “short-circuit” of cold supply air. Furthermore, when the STRAD system is applied in large space buildings with a big horizontal span, supply diffusers should be distributed surrounding the occupied zone as uniformly as possible, while avoiding installing return diffusers at exterior walls.

[1]  Zhang Lin,et al.  Comparison of gaseous contaminant diffusion under stratum ventilation and under displacement ventilation , 2010 .

[2]  G. C. Briiey Maintaining Industrial Refrigeration Systems , 2004 .

[3]  M. Filler Best Practices For Underfloor Air Systems , 2004 .

[4]  F. Bauman Underfloor air distribution (UFAD) design guide , 2003 .

[5]  Hui Zhang,et al.  Indoor Environmental Quality ( IEQ ) Title Thermal sensation and comfort models for non-uniform and transient environments : Part II : local comfort of individual body parts Permalink , 2009 .

[6]  Tin-Tai Chow,et al.  Comparison of annual energy performances with different ventilation methods for cooling , 2011 .

[7]  Ali F. Alajmi,et al.  Saving energy by using underfloor-air-distribution (UFAD) system in commercial buildings , 2010 .

[8]  H Hamid Montazeri,et al.  Cfd Simulation Of Temperature Stratification For A Building Space: Validation And Sensitivity Analysis , 2013, Building Simulation Conference Proceedings.

[9]  A. E. Holdø,et al.  An experimental study of stratified flow in enclosures , 2008 .

[10]  H Hamid Montazeri,et al.  CFD simulation of stratified indoor environment in displacement ventilation: Validation and sensitivity analysis , 2016 .

[11]  J. Niu,et al.  Numerical procedure for predicting annual energy consumption of the under-floor air distribution system , 2006 .

[12]  Joseph C. Lam,et al.  CFD analysis and energy simulation of a gymnasium , 2001 .

[13]  J. Niu,et al.  Stratified air distribution systems in a large lecture theatre: A numerical method to optimize thermal comfort and maximize energy saving , 2012 .

[14]  J. E. Janssen,et al.  Ventilation for acceptable indoor air quality , 1989 .

[15]  Josephine Lau,et al.  Measurement and CFD Simulation of the Temperature Stratification in an Atrium Using a Floor Level Air Supply Method , 2003 .

[16]  Jianlei Niu,et al.  Experimental and numerical investigations on stratified air distribution systems with special configuration: Thermal comfort and energy saving , 2013 .

[17]  Hazim B. Awbi,et al.  Energy efficient room air distribution , 1998 .