외부스티프너와 철근으로 보강한 CFT 기둥-H 형강 보 접합부의 거동

본 논문은 콘크리트충전 각형강관 기둥-H형강보 접합부로서 기둥을 관통하는 철근과 T-스티프너를 외부에 보강한 새로운 접합부상세를 제안하고, 5개의 십자형 접합부 실험체를 역대칭 반복가력 실험하였다. 실험변수는 T-스티프너의 길이(200, 250mm), 철근의 직경(HDl6, 19)이다. 실험결과 T-스티프너 길이의 증가가 철근의 강도비 증가보다 내력 및 강성에 미치는 영향이 보다 크고, T-스티프너의 보강만으로도 보붕괴형의 안정적인 이력거동을 나타내었다. 또한, T-스티프너와 강관 코너부의 용접 시에는 취성파괴의 가능성에 주의하고, 본 논문에서 제안한 용접방법을 따르는 것이 적절할 것으로 판단된다. 【This paper is a study on the behavior of Concrete-Filled Square Tubular(CFST) column to H-beam connections reinforced with external stiffeners and reinforcing bar. The cyclic loading tests of 5 test specimens were carried out. The main Parameters are as follows; 1)the length of the stiffener: 200mm, 250mm, 2)the diameter of reinforcing bar: HD16, 19. The results of the researches demonstrate that the increase of the stiffener length was more effective than the increase of the area of reinforcing bar in the point of both strength and stiffness. By reinforcing external stiffeners, stable hysteretic behavior was shown and plastic hinge was formed on the beam flange. Cold-formed tube sections should be used carefully to avoid the welding fracture at the round corners of section, and the proposed welding methods are suitable for this connections.】