Drop size correlation and population balance model for an agitated‐pulsed solvent extraction column

[1]  W. Lan,et al.  CFD–PBM simulation of two-phase flow in a pulsed disc and doughnut column with directly measured breakup kernel functions , 2019, Chemical Engineering Science.

[2]  K. T. Shenoy,et al.  CFD-PBM simulations of a pulsed sieve plate column , 2019, Progress in Nuclear Energy.

[3]  Kathryn H. Smith,et al.  Prediction of holdup and drop size distribution in a disc-doughnut pulsed column with tenova kinetics internals for the water-Alamine 336 system , 2018, Hydrometallurgy.

[4]  Norbert Kockmann,et al.  Performance of Laboratory‐Scale Stirred‐Pulsed Extraction Columns with Different Diameters , 2017 .

[5]  W. Lan,et al.  Direct measurement of droplet breakage in a pulsed disc and doughnut column , 2017 .

[6]  Haochen Zhou,et al.  Population balance of droplets in a pulsed disc and doughnut column with wettable internals , 2017 .

[7]  Kathryn H. Smith,et al.  Hydrodynamic Performance of a Pulsed Solvent Extraction Column with Novel Ceramic Internals: Holdup and Drop Size , 2017 .

[8]  R. Torkaman,et al.  A new model for prediction of drop size distribution in a liquid–liquid extraction column , 2016 .

[9]  Kathryn H. Smith,et al.  Prediction of drop size in a pulsed and non-pulsed disc and doughnut solvent extraction column , 2016 .

[10]  S. Shahhosseini,et al.  Unified new correlation for prediction of dispersed phase holdup in agitated extraction columns , 2016 .

[11]  Norbert Kockmann,et al.  Chiral Separation of 3,5-Dinitrobenzoyl-(R,S)-Leucine in Process Intensified Extraction Columns , 2015 .

[12]  M. Khajenoori,et al.  Prediction of drop size distribution in a horizontal pulsed plate extraction column , 2015 .

[13]  Mohd Izzudin Izzat Zainal Abidin,et al.  Mean Drop Size Correlations and Population Balance Models for Liquid-Liquid Dispersion , 2015 .

[14]  Norbert Kockmann,et al.  Process intensification in small scale extraction columns for counter-current operations , 2014 .

[15]  François Puel,et al.  Development of a CFD-PBE coupled model for the simulation of the drops behaviour in a pulsed column , 2014 .

[16]  A. H. Asl,et al.  Drop size distribution and mean drop size in a pulsed packed extraction column , 2012 .

[17]  Hans-Jörg Bart,et al.  Advanced prediction of pulsed (packed and sieve plate) extraction columns performance using population balance modelling , 2011 .

[18]  H. Bart,et al.  Population Balance Modeling of Pulsed (Packed and Sieve-Plate) Extraction Columns: Coupled Hydrodynamic and Mass Transfer , 2011 .

[19]  H. Bart,et al.  Industrial Scale Natural Products Extraction: BART:NAT.PROD.EXTRACTION O-BK , 2011 .

[20]  Mark W. Hlawitschka,et al.  One-Group Reduced Population Balance Model for CFD Simulation of a Pilot-Plant Extraction Column , 2010 .

[21]  Hans-Jörg Bart,et al.  Coupling of CFD with DPBM for an RDC extractor , 2009 .

[22]  Sinan Akpinar,et al.  Wind energy analysis based on maximum entropy principle (MEP)-type distribution function , 2007 .

[23]  A. M. I. Al-Rahawi,et al.  New Predictive Correlations for the Drop Size in a Rotating Disc Contactor Liquid‐Liquid Extraction Column , 2007 .

[24]  M. B. Mansur,et al.  Hydrodynamic Behavior of a Rotating Disc Contactor Under Low Agitation Conditions , 2005 .

[25]  Y. Varma,et al.  Drop size distributions in liquid pulsed columns , 1997 .

[26]  S. Hartland,et al.  Unified Correlations for the Prediction of Drop Size in Liquid−Liquid Extraction Columns , 1996 .

[27]  S. Hartland,et al.  A Unified Correlation for the Prediction of Dispersed-Phase Hold-Up in Liquid-Liquid Extraction Columns , 1995 .

[28]  C. Tsouris,et al.  Characterization of hydrodynamic parameters in a multistage column contactor , 1990 .

[29]  S. Hartland,et al.  Prediction of drop size in rotating disc extractors , 1986 .

[30]  R. Luecke,et al.  Mass transfer and drop sizes in pulsed-plate extraction columns , 1986 .

[31]  S. Hartland,et al.  PREDICTION OF DROP SIZE IN PULSED PERFORATED-PLATE EXTRACTION COLUMNS , 1986 .

[32]  R. Torkaman,et al.  A comparison between drop size distributions derived from the probability distribution functions and maximum entropy principle. Case study; pilot plant Scheibel extraction column , 2017 .

[33]  R. Torkaman,et al.  Using maximum entropy, Gamma, Inverse Gaussian and Weibull approach for prediction of drop size distribution in a liquid–liquid extraction column , 2017 .

[34]  Norbert Kockmann,et al.  Single stage and countercurrent extraction of 5-hydroxymethylfurfural from aqueous phase systems , 2016 .

[35]  N. Kockmann,et al.  Enantioseparation of chiral aromatic acids in process intensified liquid–liquid extraction columns , 2015 .

[36]  J. Kuhnert,et al.  A CFD-Population Balance Model for the Simulation of Kühni Extraction Column , 2011 .

[37]  Lawrence L. Tavlarides,et al.  Description of interaction processes in agitated liquid-liquid dispersions , 1977 .