Experimental Evaluation of Triple-Stage-Actuator System with Thermal Actuator for Hard Disk Drives

Abstract To improve positioning accuracy in a head-positioning control system for hard disk drives, we have developed a triple-stage-actuator system on a spin-stand tester. In this system, the first stage is a VCM actuator for moving a head-stack assembly, the second stage is a PZT actuator for moving a suspension, and the third stage is a thermal actuator for moving read /write elements. The frequency response of the thermal actuator showed that the thermal actuator system has no mechanical resonant mode. Therefore, this head-positioning system with a thermal actuator can control the head position in high frequency range without negative impact from mechanical resonances. As a result, the servo bandwidth of the proposed triple-stage-actuator system can be higher than that of the conventional dual-stage-actuator system which consists of the VCM and the PZT actuators. This improvement is similar to the improvement from the single-stage -actuator system to the dual-stage-actuator system. Experimental results on the spin-stand tester showed that the proposed control system can dramatically improve the positioning accuracy during a track-following control.

[1]  M. Kurita,et al.  Dynamically Controlled Thermal Flying-Height Control Slider , 2008, IEEE Transactions on Magnetics.

[2]  M.T. White,et al.  Comparison of a MEMS microactuator and a PZT milliactuator for high-bandwidth HDD servo , 2004, Proceedings of the 2004 American Control Conference.

[3]  Takenori Atsumi,et al.  Modified Bode Plots for Robust Performance in SISO Systems With Structured and Unstructured Uncertainties , 2012, IEEE Transactions on Control Systems Technology.

[4]  Takenori Atsumi.  Feedforward Control Using Sampled-Data Polynomial for Track Seeking in Hard Disk Drives , 2009, IEEE Transactions on Industrial Electronics.

[5]  Atsumi Takenori.  Optimization of Head-Positioning Control in a Hard Disk Drive Using the RBode Plot , 2010 .

[6]  Y. Yamaguchi,et al.  A dual-stage magnetic disk drive actuator using a piezoelectric device for a high track density , 1991 .

[7]  H. R. Rapley,et al.  Designing controllers for two stage disk drive actuator systems using the PQ method and the sbode plot , 2001 .

[8]  Tong Heng Lee,et al.  Nanoposition sensing and control in HDD dual-stage servo systems , 2004, Proceedings of the 2004 IEEE International Conference on Control Applications, 2004..

[9]  Takenori Atsumi,et al.  Head-positioning control system using thermal actuator in hard disk drives , 2013 .

[10]  Shigeo Nakamura,et al.  Active head slider with piezoelectric actuator using shear mode deformation , 2008 .

[11]  A. Okuyama,et al.  Track-following Control Using Resonant Filter in Hard Disk Drives , 2007, 2007 American Control Conference.

[12]  Takenori Atsumi,et al.  Development of Optimized Adaptive Feed-Forward Cancellation with Damping Function for Head Positioning System in Hard Disk Drives , 2013 .

[13]  Takenori Atsumi,et al.  Optimization of adaptive feedforward repeatable run-out cancellation for positioning control system of hard disk drives , 2012 .

[14]  Takenori Atsumi,et al.  Integrated Design of a Controller and a Structure for Head-positioning in Hard Disk Drives , 2006 .

[15]  Tomoyoshi Yamada,et al.  Microactuator control for disk drive , 1996 .

[16]  T. Suzuki,et al.  Shear mode piezoelectric microactuator for magnetic disk drives , 1998 .

[17]  K. Matsuoka,et al.  Thin-film piezoelectric DSA for HDD , 2002 .

[18]  M. Furukawa,et al.  Triple-Stage-Actuator System of Head-Positioning Control in Hard Disk Drives , 2012, IEEE Transactions on Magnetics.

[19]  A. Okuyama,et al.  Vibration control above the nyquist frequency in hard disk drives , 2006, 9th IEEE International Workshop on Advanced Motion Control, 2006..

[20]  Roberto Horowitz,et al.  Mechatronics of electrostatic microactuators for computer disk drive dual-stage servo systems , 2001 .

[21]  Kyosuke Ono,et al.  Feasibility study of thermal positioning control actuator for hard disk drives , 2012 .

[22]  Takenori Atsumi.  Head-Positioning Control of Hard Disk Drives Through the Integrated Design of Mechanical and Control Systems , 2009, Int. J. Autom. Technol..

[23]  Takenori Atsumi,et al.  Vibration Servo Control Design for Mechanical Resonant Modes of a Hard-Disk-Drive Actuator , 2003 .

[24]  S. Nakagawa,et al.  A phase-stabilized servo controller for dual-stage actuators in hard disk drives , 2002, Digest of the Asia-Pacific Magnetic Recording Conference.

[25]  Takenori Atsumi.  Disturbance Suppression beyond Nyquist Frequency in Hard Disk Drives , 2008 .

[26]  Kyosuke Ono,et al.  Thermal actuator for accurate positioning read/write element in hard disk drive , 2012 .

[27]  Takenori Atsumi,et al.  Estimation method for unobservable settling vibration of head-positioning control in hard disk drives , 2013 .

[28]  Takenori Atsumi,et al.  Head-Positioning Control Using Virtual Resonant Modes in a Hard Disk Drive , 2005 .

[29]  Takenori Atsumi,et al.  Analysis of Unobservable Oscillations in Sampled-Data Positioning Systems , 2012, IEEE Transactions on Industrial Electronics.