Investigation on Modal Transient Response Analysis of Engine Crankshaft Structure

The crankshaft is a very crucial part in an internal combustion engine. This paper presents the findings of the mode shape and natural frequency of 3 cylinder 4 stroke engine crankshafts. Both experimental and computational methods were carried out to determine the modal parameter or dynamic characteristics, which are natural frequency, damping factor and mode shape. The prediction of the dynamic properties of the chassis is of great significance in determining the natural frequencies of the structure. The experiment is done by using an impact hammer to excite the crankshaft and data is recorded using a data acquisition system (DAS) connected to a sensor located on the crankshaft. Computational modal analysis on the crankshaft structure is simulated using finite element software. It can be seen from the results that there is a good agreement between the experimental and computational results in terms of modal parameter with a small discrepancy. The modal analysis techniques are essential for automotive crankshaft structure design.

[1]  X. Zhang,et al.  Torsional vibration of crankshaft in an engine–propeller nonlinear dynamical system , 2009 .

[2]  Eugenio Brusa,et al.  TORSIONAL VIBRATION OF CRANKSHAFTS: EFFECTS OF NON-CONSTANT MOMENTS OF INERTIA , 1997 .

[3]  Yuan Kang,et al.  MODAL ANALYSES AND EXPERIMENTS FOR ENGINE CRANKSHAFTS , 1998 .

[4]  Abd Rahim Abu Bakar,et al.  An experimental investigation into noise and vibration of an automotive wiper , 2007 .

[5]  Ahmad A. Smaili,et al.  Dynamic modeling of automotive engine crankshafts , 1994 .

[6]  Zheng-Dong Ma,et al.  An Efficient Multibody Dynamics Model for Internal Combustion Engine Systems , 2003 .

[7]  Brian Stone,et al.  Secondary Inertia Effects in the Torsional Vibration of Reciprocating Engines—A Literature Review , 1995 .

[8]  D. J. Ewins,et al.  Modal Testing: Theory and Practice , 1984 .

[9]  K. E. Rouch,et al.  Modelling of rotors with axisymmetric solid harmonic elements , 1989 .

[10]  K. E. Rouch,et al.  Modeling Rotating Shafts Using Axisymmetric Solid Finite Elements with Matrix Reduction , 1993 .

[11]  M S Pasricha,et al.  TORSIONAL VIBRATIONS IN RECIPROCATING ENGINES , 1976 .

[12]  Homer Rahnejat,et al.  Elasto-multi-body dynamics of a multicylinder internal combustion engine , 2002 .

[13]  Homer Rahnejat,et al.  Torsional vibration analysis of a multi-body single cylinder internal combustion engine model , 1997 .

[14]  Sotirios Natsiavas,et al.  Linear and nonlinear dynamics of reciprocating engines , 2003 .