A high-speed protection circuit for IGBTs subjected to hard-switching faults

This paper describes a high-speed protection circuit for IGBTs subjected to hard-switching faults (HSF). The reverse transfer capacitance depends on a collector-emitter voltage and it produces a significant effect on a switching behavior not only under normal conditions but also under HSF conditions. A gate charge characteristic under HSF conditions differs from that under normal turn-on conditions. Hence, a hard-switching fault can be detected by monitoring both a gate-emitter voltage and an amount of gate charge during the turn-on transient period. IGBTs can be rapidly protected from destruction because a blanking time is unnecessary. Simulation and experiment verify the validity of the proposed high-speed protection circuit.

[1]  Ichiro Omura,et al.  Ultra high speed short circuit protection for IGBT with gate charge sensing , 2010, 2010 22nd International Symposium on Power Semiconductor Devices & IC's (ISPSD).

[2]  Xiaosong Kang,et al.  Two-step parameter extraction procedure with formal optimization for physics-based circuit simulator IGBT and p-i-n diode models , 2006, IEEE Transactions on Power Electronics.

[3]  E. Santi,et al.  Parameter extraction for a physics-based circuit simulator IGBT model , 2003, Eighteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2003. APEC '03..

[4]  G. Belverde,et al.  A new gate circuit performing fault protections of IGBTs during short circuit transients , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[5]  Jerry L. Hudgins,et al.  Modeling of IGBT resistive and inductive turn-on behavior , 2005 .

[6]  A. Caiafa,et al.  Parameter extraction for a power diode circuit simulator model including temperature dependent effects , 2002, APEC. Seventeenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.02CH37335).

[7]  P. A. Mawby,et al.  Investigation of the power dissipation during IGBT turn-off using a new physics-based IGBT compact model , 2002, Microelectron. Reliab..

[8]  Ichiro Omura,et al.  Full digital short circuit protection for advanced IGBTs , 2011, 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs.

[9]  Allen R. Hefner,et al.  An analytical model for the steady-state and transient characteristics of the power insulated-gate bipolar transistor , 1988 .

[10]  Didier Theilliol,et al.  A Failure-Detection Strategy for IGBT Based on Gate-Voltage Behavior Applied to a Motor Drive System , 2011, IEEE Transactions on Industrial Electronics.

[11]  H. Schlangenotto,et al.  On the effective carrier lifetime in p-s-n rectifiers at high injection levels , 1969 .

[12]  Dong-Seok Hyun,et al.  A Novel Short-Circuit Detecting Scheme Using Turn-On Switching Characteristic of IGBT , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[13]  R. S. Chokhawala,et al.  A discussion on IGBT short-circuit behavior and fault protection schemes , 1995 .