Shape optimization of a long-tapered R134a ejector mixing chamber

Abstract The purpose of this investigation is to develop a computational methodology for the shape optimization of long-tapered mixing chambers of refrigerant ejectors based on the internal entropy generation. The workflow of the aforementioned methodology includes a one dimensional model to generate a baseline geometry. Then a design of experiments is performed around a parametrization of the baseline geometry and the resulting combinations are introduced in the CFD model. Based on the CFD entropy generation results, a surrogate model is trained and further used to determine the optimum geometry for the mixing chamber. The application of the surrogate model is not straightforward, but rather a loop style routine has been programmed in order to assure a global minimum rather than a local one. The proposed methodology has been applied to a R134a ejector geometry previously studied by the authors both experimentally and numerically. It has been found that given a design critical point, the entrainment ratio may be increased up to a value of 16% with the shape optimization whereas the discharge pressure remains constant.

[1]  R. Haftka,et al.  Multiple surrogates: how cross-validation errors can help us to obtain the best predictor , 2009 .

[2]  Sébastien Poncet,et al.  Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark , 2016 .

[3]  Jerome Sacks,et al.  Choosing the Sample Size of a Computer Experiment: A Practical Guide , 2009, Technometrics.

[4]  Reinhard Radermacher,et al.  Optimization of two-phase R600a ejector geometries using a non-equilibrium CFD model , 2016 .

[5]  José Sierra-Pallares,et al.  An experimental and computational study of the flow pattern in a refrigerant ejector. Validation of turbulence models and real-gas effects , 2015 .

[6]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 8.0 , 2007 .

[7]  M. D. McKay,et al.  A comparison of three methods for selecting values of input variables in the analysis of output from a computer code , 2000 .

[8]  Cyrille Dennis Moore.  Experiments in Axisymmetric Supersonic Jets. , 1996 .

[9]  Adriano Milazzo,et al.  Performance analysis of a supersonic ejector cycle working with R245fa , 2015 .

[10]  Ed J. Walsh,et al.  Relation of entropy generation to wall ‘laws’ for turbulent flows , 2008 .

[11]  Waclaw Kus,et al.  CFD-based shape optimisation of a CO2 two-phase ejector mixing section , 2016 .

[12]  H. Herwig,et al.  Direct and indirect methods of calculating entropy generation rates in turbulent convective heat transfer problems , 2006 .

[13]  José Sierra-Pallares,et al.  A computational study about the types of entropy generation in three different R134a ejector mixing chambers , 2016 .

[14]  Armin Hafner,et al.  A CFD-based investigation of the energy performance of two-phase R744 ejectors to recover the expansion work in refrigeration systems: An irreversibility analysis , 2014 .

[15]  Yann Bartosiewicz,et al.  New methods for analyzing transport phenomena in supersonic ejectors , 2017 .

[16]  Sébastien Poncet,et al.  Turbulence modeling of a single-phase R134a supersonic ejector. Part 2: Local flow structure and exergy analysis , 2016 .

[17]  John Holland,et al.  Adaptation in Natural and Artificial Sys-tems: An Introductory Analysis with Applications to Biology , 1975 .

[18]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[19]  Adriano Sciacovelli,et al.  Entropy generation analysis as a design tool - A review , 2015 .

[20]  E. Acar.  Various approaches for constructing an ensemble of metamodels using local measures , 2010 .

[21]  Julio Fco. San José Alonso,et al.  A one dimensional model for the determination of an ejector entrainment ratio , 2012 .

[22]  Björn Palm,et al.  Screening of working fluids for the ejector refrigeration system , 2014 .

[23]  J. García del Valle,et al.  An experimental investigation of a R-134a ejector refrigeration system , 2014 .

[24]  K. E. Starling,et al.  Generalized multiparameter correlation for nonpolar and polar fluid transport properties , 1988 .

[25]  Armin Hafner,et al.  Shape optimisation of a two-phase ejector for CO2 refrigeration systems , 2017 .

[26]  T. Sriveerakul,et al.  Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD results , 2007 .

[27]  D. Peng,et al.  A New Two-Constant Equation of State , 1976 .

[28]  Fabio Inzoli,et al.  Ejector refrigeration: A comprehensive review , 2016 .

[29]  T. Simpson,et al.  Comparative studies of metamodelling techniques under multiple modelling criteria , 2001 .