An approximation to the reliability of series geotechnical systems using a linearization approach

A method based on the linearization of the limit state functions (LSFs) is applied to evaluate the reliability of series geotechnical systems. The approach only needs information provided by first order reliability method (FORM) results: the vector of reliability indices, β, of the LSFs composing the system; and their correlation matrix, R. Two common geotechnical problems—the stability of a slope in layered soil and a circular tunnel in rock—are employed to demonstrate the simplicity, accuracy and efficiency of the suggested procedure, and advantages of the linearization approach with respect to alternative computational tools are discussed. It is also found that, if necessary, the second order reliability method (SORM)—that approximates the true LSF better than FORM—can be employed to compute better estimations of the system’s reliability.

[1]  Bak Kong Low,et al.  Probabilistic analysis of underground rock excavations using response surface method and SORM , 2011 .

[2]  Kok-Kwang Phoon,et al.  Application of the Kriging-Based Response Surface Method to the System Reliability of Soil Slopes , 2013 .

[3]  Tien H. Wu,et al.  System reliability of slope stability , 1990 .

[4]  Gordon A. Fenton,et al.  SYSTEM RELIABILITY OF SLOPES BY RFEM , 2010 .

[5]  E. T. Brown,et al.  Underground excavations in rock , 1980 .

[6]  Yu WangY. Wang,et al.  Practical reliability analysis of slope stability by advanced Monte Carlo simulations in a spreadsheet , 2011 .

[7]  N. Vlachopoulos,et al.  Improved Longitudinal Displacement Profiles for Convergence Confinement Analysis of Deep Tunnels , 2009 .

[8]  Dian-Qing Li,et al.  Extension of Hassan and Wolff method for system reliability analysis of soil slopes , 2013 .

[9]  C. Bucher,et al.  A fast and efficient response surface approach for structural reliability problems , 1990 .

[10]  Pierpaolo Oreste.  Analysis of structural interaction in tunnels using the covergence–confinement approach , 2003 .

[11]  F Barranco-Cicilia,et al.  Structural Reliability Analysis of Limit State Functions With Multiple Design Points Using Evolutionary Strategies , 2009 .

[12]  C. Cornell.  Bounds on the Reliability of Structural Systems , 1967 .

[13]  C A Cornell,et al.  FIRST-ORDER UNCERTAINTY ANALYSIS OF SOIL DEFORMATION AND STABILITY , 1972 .

[14]  Wilson H. Tang,et al.  Efficient system reliability analysis illustrated for a retaining wall and a soil slope , 2011 .

[15]  Bak Kong Low,et al.  Reliability-based design applied to retaining walls , 2005 .

[16]  Evert Hoek,et al.  Practical estimates of rock mass strength , 1997 .

[17]  Pierpaolo Oreste,et al.  The Convergence-Confinement Method: Roles and Limits in Modern Geomechanical Tunnel Design , 2009 .

[18]  C. Fairhurst,et al.  APPLICATION OF THE CONVERGENCE-CONFINEMENT METHOD OF TUNNEL DESIGN TO ROCK MASSES THAT SATISFY THE HOEK-BROWN FAILURE CRITERION , 2000 .

[19]  Wilson H. Tang,et al.  KRIGING NUMERICAL MODELS FOR GEOTECHNICAL RELIABILITY ANALYSIS , 2011 .

[20]  Evert Hoek,et al.  HOEK-BROWN FAILURE CRITERION - 2002 EDITION , 2002 .

[21]  Wilson H. Tang,et al.  Probability concepts in engineering planning and design , 1984 .

[22]  Bak Kong Low,et al.  System Reliability Assessment for a Rock Tunnel with Multiple Failure Modes , 2013, Rock Mechanics and Rock Engineering.

[23]  R. Jimenez-Rodrigueza,et al.  System reliability approach to rock slope stability , 2005 .

[24]  Kok-Kwang Phoon,et al.  Efficient Evaluation of Reliability for Slopes with Circular Slip Surfaces Using Importance Sampling , 2009 .

[25]  Wilson H. Tang,et al.  New methods for system reliability analysis of soil slopes , 2011 .

[26]  Sung Eun Cho,et al.  Probabilistic stability analyses of slopes using the ANN-based response surface , 2009 .

[27]  J. Christian,et al.  Reliability Applied to Slope Stability Analysis , 1994 .

[28]  B. K. Low,et al.  Reliability-Based Design Applied to Retaining Walls , 2005 .

[29]  Shailendra K. Sharan,et al.  Analytical solutions for stresses and displacements around a circular opening in a generalized Hoek–Brown rock , 2008 .

[30]  Liping Li,et al.  Determination of Critical Slip Surfaces Using Mutative Scale Chaos Optimization , 2015, J. Comput. Civ. Eng..

[31]  Jian Ji,et al.  Stratified Response Surfaces for System Probabilistic Evaluation of Slopes , 2012 .

[32]  R. N. Chowdhury,et al.  Geotechnical system reliability of slopes , 1995 .

[33]  O. Ditlevsen.  Narrow Reliability Bounds for Structural Systems , 1979 .

[34]  N. Sitar,et al.  Rock Wedge Stability Analysis Using System Reliability Methods , 2007 .

[35]  Leandro R. Alejano,et al.  Plastic radii and longitudinal deformation profiles of tunnels excavated in strain-softening rock masses , 2012 .

[36]  K. Phoon,et al.  Observations on Limit Equilibrium–Based Slope Reliability Problems with Inclined Weak Seams , 2010 .

[37]  Fred Moses,et al.  Reliability of Structural Systems , 1974 .

[38]  R. Rackwitz,et al.  First-order concepts in system reliability , 1982 .

[39]  Sung Eun Cho,et al.  First-order reliability analysis of slope considering multiple failure modes , 2013 .