The UFA method for rapid, direct measurements of unsaturated transport properties in soil, sediment, and rock

These studies illustrate the efficacy of a newly developed unsaturated/saturated flow apparatus (UFA) to decrease significantly the time required to obtain direct measurements of transport parameters. The UFA method can be applied to cores of soil, sediment, rock, concrete, or any other porous media, especially highly unsaturated and relatively impermeable materials. The UFA method is effective because it allows the operator to set variables in Darcy"s Law and impose any desired steady-state hydraulic conductivity. The UFA achieves hydraulic steady-state in hours by using an adjustable body force (provided by a centrifugal acceleration in the rotating frame of reference) to drive the fluid, coupled with precision fluid flow through a rotating seal assembly. The normal operating range of unsaturated hydraulic conductivity that can be imposed by the UFA is from the saturated conductivity for that specimen [up to about 10-4 cm/s (10-1 darcy; 10-9 cm2)] down to about 10-11 cm/s (10-8 darcy; 10-16 cm2). For strictly saturated conditions, the UFA can operate down to 10-14 cm/s. Temperatures can be adjusted from -20° to 150°C, and constant flow can be imposed during rotation down to 0·001 mL/h. Several comparisons are made among K(t) results, determined on splits of the same samples using the UFA and other methods, to the van Genuchten/Mualem estimations derived from water retention data using RETC. A case study is also discussed involving subsurface hydrostratigraphic mapping and recharge distribution at a mixed waste site. This study demonstrates the speed, economy, and direct measurement capability of the UFA that make it optimal for determining transport behaviour under unsaturated conditions.

[1]  N. T. Burdine.  Relative Permeability Calculations From Pore Size Distribution Data , 1953 .

[2]  Evaluation of Van Genuchten–Mualem Relationships to Estimate Unsaturated Hydraulic Conductivity at Low Water Contents , 1995 .

[3]  M. L. Rockhold,et al.  Variations in Recharge at the Hanford Site , 1992 .

[4]  B. Scanlon.  Evaluation of liquid and vapor water flow in desert soils based on chlorine 36 and tritium tracers and nonisothermal flow simulations , 1992 .

[5]  Jan W. Hopmans,et al.  Two‐dimensional steady state unsaturated water flow in heterogeneous soils with autocorrelated soil hydraulic properties , 1988 .

[6]  R. G. Hills,et al.  Modeling one‐dimensional infiltration into very dry soils: 2. Estimation of the soil water parameters and model predictions , 1989 .

[7]  Van Genuchten,et al.  A closed-form equation for predicting the hydraulic conductivity of unsaturated soils , 1980 .

[8]  E. C. Childs,et al.  The permeability of porous materials , 1950, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[9]  P. R. Heller,et al.  Model assessment of protective barrier designs , 1985 .

[10]  L. A. Richards,et al.  The Determination of Soil Moisture Energy Relations by Centrifugation 1 , 1939 .

[11]  T. J. Marshall.  A RELATION BETWEEN PERMEABILITY AND SIZE DISTRIBUTION OF PORES , 1958 .

[12]  R. Carsel,et al.  Developing joint probability distributions of soil water retention characteristics , 1988 .

[13]  K. Rehfeldt,et al.  Evaluation of closed-form analytical models to calculate conductivity in a fine sand , 1985 .

[14]  D. Stonestrom,et al.  The feasibility of recharge rate determinations using the steady-state centrifuge method , 1994 .

[15]  L. E. Scriven,et al.  Hydraulic Conductivity of Porous Media at Low Water Content , 1990 .

[16]  Feike J. Leij,et al.  The RETC code for quantifying the hydraulic functions of unsaturated soils , 1992 .

[17]  K. Jensen,et al.  Application of stochastic unsaturated flow theory, numerical simulations, and comparisons to field observations , 1990 .

[18]  R. J. Kunze,et al.  Factors Important in the Calculation of Hydraulic Conductivity1 , 1968 .

[19]  Christopher G. Uchrin,et al.  Indirect Methods for Estimating the Hydraulic Properties of Unsaturated Soils , 1994 .

[20]  E. Brunner,et al.  Measurement of Capillary Pressures in Small Core Samples , 1945 .

[21]  John R. Nimmo,et al.  Centrifugal techniques for measuring saturated hydraulic conductivity , 1991 .

[22]  Feike J. Leij,et al.  Analysis of Measured, Predicted, and Estimated Hydraulic Conductivity Using the RETC Computer Program , 1992 .

[23]  David Savage,et al.  The Scientific and Regulatory Basis for the Geological Disposal of Radioactive Waste , 1996 .

[24]  Daniel B. Stephens,et al.  Vadose Zone Hydrology , 1995 .

[25]  J. Quirk,et al.  Permeability of porous solids , 1961 .

[26]  John R. Nimmo,et al.  DIVISION S-l-SOIL PHYSICS Hydraulic Conductivity of a Sandy Soil at Low Water Content After Compaction by Various Methods , 1988 .

[27]  Y. Mualem.  A New Model for Predicting the Hydraulic Conductivity , 1976 .