A comparative life cycle analysis of hydrogen production via thermochemical water splitting using a Cu–Cl cycle

Abstract In this paper, a comparative environmental study is reported of the Cu–Cl water-splitting cycle with various other hydrogen production methods: the sulphur–iodine (S–I) water-splitting cycle, high temperature water electrolysis, conventional steam reforming of natural gas and hydrogen production from renewable resources. The investigation uses life cycle assessment (LCA), which is an analytical tool to identify and quantify environmentally critical phases during the life cycle of a system or a product and/or to evaluate and decrease the overall environmental impact of the system or product. The LCA results for the hydrogen production processes indicate that the thermochemical cycles have lower environmental impacts while steam reforming of natural gas has the highest.

[1]  Meng Ni,et al.  Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production , 2009 .

[2]  J. Dufour,et al.  Life cycle assessment of processes for hydrogen production. Environmental feasibility and reduction of greenhouse gases emissions , 2009 .

[3]  Christopher J. Koroneos,et al.  Life cycle assessment of hydrogen fuel production processes , 2004 .

[4]  Matjaz Prek,et al.  Environmental impact and life cycle assessment of heating and air conditioning systems, a simplified case study , 2004 .

[5]  Pamela L. Spath,et al.  Life Cycle Assessment of Hydrogen Production via Natural Gas Steam Reforming , 2000 .

[6]  Christian Solli,et al.  Fission or Fossil?: A Comparative Hybrid Life Cycle Assessment of Two Different Hydrogen Production Methods , 2004 .

[7]  Henri Lecouls,et al.  ISO 14043: Environmental management · life cycle assessment · life cycle interpretation , 1999 .

[8]  Ibrahim Dincer,et al.  An exergy–cost–energy–mass analysis of a hybrid copper–chlorine thermochemical cycle for hydrogen production , 2010 .

[9]  Ibrahim Dincer,et al.  Life Cycle Assessment of Hydrogen Production Using Nuclear Energy: An Application Based on Thermochemical Water Splitting , 2010 .

[10]  Edgar G. Hertwich,et al.  Fission or Fossil: Life Cycle Assessment of Hydrogen Production , 2006, Proceedings of the IEEE.

[11]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[12]  Greg F. Naterer,et al.  Comparison of different copper–chlorine thermochemical cycles for hydrogen production , 2009 .

[13]  M. Orhan Energy, exergy and cost analyses of nuclear-based hydrogen production via thermochemical water decomposition using a copper-chlorine (Cu-CI) cycle , 2008 .

[14]  Greg F. Naterer,et al.  Thermochemical hydrogen production with a copper-chlorine cycle. I: oxygen release from copper oxychloride decomposition , 2008 .

[15]  Ibrahim Dincer,et al.  Recent Canadian advances in nuclear-based hydrogen production and the thermochemical Cu–Cl cycle , 2009 .

[16]  Hans-Jürgen Dr. Klüppel,et al.  ISO 14041: Environmental management — life cycle assessment — goal and scope definition — inventory analysis , 1998 .

[17]  G. Naterer,et al.  Nuclear‐based hydrogen production with a thermochemical copper–chlorine cycle and supercritical water reactor: equipment scale‐up and process simulation , 2012 .

[18]  Katarina Heikkilä,et al.  Environmental impact assessment using a weighting method for alternative air-conditioning systems , 2004 .

[19]  V. Utgikar,et al.  Life cycle assessment of high temperature electrolysis for hydrogen production via nuclear energy , 2006 .

[20]  Ibrahim Dincer,et al.  The oxygen production step of a copper–chlorine thermochemical water decomposition cycle for hydrogen production: Energy and exergy analyses , 2009 .

[21]  S. Ryding ISO 14042 Environmental management • Life cycle assessment • life cycle impact assessment , 1999 .

[22]  G. Naterer,et al.  Multiphase reactor scale-up for Cu–Cl thermochemical hydrogen production , 2008 .

[23]  Christopher J. Koroneos,et al.  HYDROGEN PRODUCTION VIA BIOMASS GASIFICATION-A LIFE CYCLE ASSESSMENT APPROACH , 2008 .