Correlation of microstructure with high-temperature hardness of (TiC,TiN)/Ti–6Al–4V surface composites fabricated by high-energy electron-beam irradiation

[1]  Sunghak Lee,et al.  Correlation of microstructure with wear and fracture properties of two-layered VC/Ti-6Al-4V surface composites fabricated by high-energy electron-beam irradiation , 2002 .

[2]  G. Remnev,et al.  The effect of crater creation on the fatigue strength and corrosion resistance of steels and titanium alloys irradiated by high-power pulsed ion beams , 2002 .

[3]  A. Pogrebnjak,et al.  Modification of wear and fatigue characteristics of Ti–V–Al alloy by Cu and Ni ion implantation and high-current electron beam treatment , 2001 .

[4]  Sunghak Lee,et al.  Microstructural Modification and property improvement of boride/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation , 2001 .

[5]  Dongbok Lee,et al.  Cyclic oxidation behavior of TiCrN coating deposited on a steel substrate by the Arc-ion plating method , 2001 .

[6]  Sunghak Lee,et al.  Microstructural modification and hardness improvement of titanium-base surface-alloyed materials fabricated by high-energy electron beam irradiation , 2000 .

[7]  Y. Ivanov,et al.  Effect of Fe and Zr ion implantation and high-current electron irradiation treatment on chemical and mechanical properties of Ti–V–Al Alloy , 2000 .

[8]  A. Zecca,et al.  Evolution of vacancy defects and dislocations in surface layers of iron as a result of pulsed electron beam treatment , 1998 .

[9]  G. Remnev,et al.  Termomechanical processing of titanium alloys by high power pulsed ion beams , 1998 .

[10]  Sung-Joon Kim,et al.  Low cost synthesis and property evaluation of P/M Ti alloys and ti-based particulate composites , 1998 .

[11]  T. N. Baker,et al.  Analysis of the phases developed by laser nitriding Ti6Al4V alloys , 1997 .

[12]  J. Rivière,et al.  Formation of TiB2 coatings at room temperature by dynamic ion mixing , 1996 .

[13]  A. Perry,et al.  Thin TiN and TiB2 coatings with low residual stress deposited at different temperatures by cathodic arc ion plating , 1994 .

[14]  P. N. Gibson,et al.  Titanium boron nitride coatings of very high hardness , 1994 .

[15]  M. Pons,et al.  Laser surface melting of mild steel with submicronic titanium carbide powders , 1994 .

[16]  Michael L. Bauccio,et al.  ASM engineering materials reference book , 1994 .

[17]  J. Elders,et al.  Laser‐induced chemical vapor deposition of titanium diboride , 1994 .

[18]  Helmut Huegel,et al.  Laser surface alloying of steel with TiC , 1991, Other Conferences.

[19]  P. Bianchi,et al.  Laser deposition of carbide-reinforced coatings , 1991 .

[20]  R. Zee,et al.  In situ formation of three-dimensional TiC reinforcements in Ti-TiC composites , 1991 .

[21]  J. Celis,et al.  Interrelationship between processing, coatingproperties and functional properties of steered arc physically vapour deposited (Ti,AI)N and (Ti,Nb)N coatings , 1990 .

[22]  F. Saris,et al.  Surface alloying by ion, electron, and laser beams: Papers presented at the 1985 ASM Materials Science Seminar, eds. L.E. Rehn, S.T. Picraux and H. Wiedersich. (ASM, Metals Park, Ohio 44073, 1987) pp. xii + 417, US$112,-, ISBN 0-87170-274-6 , 1988 .

[23]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[24]  Siegfried Schiller,et al.  Electron beam technology , 1982 .

[25]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .