Repair of surface cracks in 3D-printed porous ceramic skeletons after sintering

[1]  Song Yao,et al.  Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites , 2023, Composite Structures.

[2]  Huan Wang,et al.  Preparation of Porous SiC Ceramics Skeleton with Low-cost and Controllable Gradient Based on Liquid Crystal Display 3D Printing , 2022, Journal of the European Ceramic Society.

[3]  Weiyi Chen,et al.  Progress in 3D printing for bone tissue engineering: a review , 2022, Journal of Materials Science.

[4]  Yawei Li,et al.  The effect of cellular structure on the strength and combustion properties of SiC porous ceramics , 2021, Ceramics International.

[5]  P. Colombo,et al.  Enhanced 3D printed alumina ceramic cores via impregnation , 2021, Journal of the American Ceramic Society.

[6]  Y. Xuan,et al.  High thermal conductivity and high energy density compatible latent heat thermal energy storage enabled by porous AlN ceramics composites , 2021, International Journal of Heat and Mass Transfer.

[7]  P. Tao,et al.  Ultra-high temperature ablation property of Ta0.5Hf0.5C ternary ceramic under plasma flame , 2021 .

[8]  Yong Yang,et al.  An efficient and low-cost liquid silicon infiltration method to prepare SiC-coated carbon short fiber for fiber protection of Cf/SiC ceramic matrix composites , 2021 .

[9]  Changyong Liu,et al.  Dimensional retention of photocured ceramic units during 3D printing and sintering processes , 2021 .

[10]  Sefiu Abolaji Rasaki,et al.  Photopolymerization-based additive manufacturing of ceramics: A systematic review , 2021, Journal of Advanced Ceramics.

[11]  Yongde Xia,et al.  Porous ceramics: Light in weight but heavy in energy and environment technologies , 2021, Materials Science and Engineering: R: Reports.

[12]  Yong Yang,et al.  Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics , 2020 .

[13]  T. Chartier,et al.  Synthesis and properties of macroporous SiC ceramics synthesized by 3D printing and chemical vapor infiltration/deposition , 2020, Journal of the European Ceramic Society.

[14]  Zhu He,et al.  The hydration resistance, evolution mechanism of sol-coated aluminum and its effect on mechanical properties of SiC reticulated porous ceramics , 2020, Ceramics International.

[15]  Chong Wang,et al.  3D printing of bone tissue engineering scaffolds , 2020, Bioactive materials.

[16]  V. Popov,et al.  Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration , 2019, Ceramics International.

[17]  D. Das,et al.  Fabrication of complex shaped ceramic articles from 3D printed polylactic acid templates by replication process , 2019, Ceramics International.

[18]  Gang Xu,et al.  Preparation and stereolithography 3D printing of ultralight and ultrastrong ZrOC porous ceramics , 2019, Journal of Alloys and Compounds.

[19]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[20]  M. Park,et al.  Improvement of dispersion stability and 3D-printing characteristics of ceramics in photopolymers by controlling the coating thickness of silane coupling agents , 2018, Materials Chemistry and Physics.

[21]  P. Greil,et al.  Sol-gel infiltration of complex cellular indirect 3D printed alumina , 2018, Journal of the European Ceramic Society.

[22]  P. Ifju,et al.  Quasi-static and dynamic response of 3D-printed alumina , 2018, Journal of the European Ceramic Society.

[23]  L. Rabinskiy,et al.  Mechanical behavior of porous Si3N4 ceramics manufactured with 3D printing technology , 2018, Journal of Materials Science.

[24]  O. Lyckfeldt,et al.  Influence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography , 2017, Materials.

[25]  Z. Eckel,et al.  Additive manufacturing of polymer-derived ceramics , 2016, Science.

[26]  Xuan Song,et al.  Ceramic Fabrication Using Mask-Image-Projection- based Stereolithography Integrated with Tape-casting , 2015 .

[27]  Florencia Edith Wiria,et al.  Property enhancement of 3D-printed alumina ceramics using vacuum infiltration , 2014 .

[28]  Robert Liska,et al.  Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures , 2012 .

[29]  M. Fukushima,et al.  Macro-porous ceramics: processing and properties , 2012 .

[30]  Xiaosu Cheng,et al.  Preparation of large effective specific surface area reticulate porous ceramics by polymeric foam replication process using recoating technique , 2011 .

[31]  D. Xie,et al.  The Characteristics of Silica-Sol Combining Refractories , 2011 .

[32]  S. A. Suvorov,et al.  Unmolded refractories with a silica sol binder , 2010 .

[33]  Hui Yang,et al.  Gel-casting without de-airing process using silica sol as a binder , 2007 .

[34]  H. Geng,et al.  Reticulated Porous Multiphase Ceramics with Improved Compressive Strength and Fracture Toughness , 2007, Journal of Materials Engineering and Performance.

[35]  S. Karlsson,et al.  Silica sols as refractory fibre binders , 2001 .

[36]  Hyoun‐Ee Kim,et al.  Innovative in situ photocuring-assisted 3D plotting technique for complex-shaped ceramic architectures with high shape retention , 2019, Ceramics International.

[37]  Paolo Colombo,et al.  Stereolithography of SiOC Ceramic Microcomponents , 2016, Advanced materials.