Mechanical, thermal, and tribological characterization of bio-polymeric composites: A comprehensive review

Abstract The current review extensively discusses the effects of various natural fillers on mechanical, thermal, and tribological characteristics of polypropylene, polyethylene, poly(vinyl chloride), and polyester resin matrices. The discussion has considered all of the tensile, flexural, and impact properties along with the wear rate and thermogravimetric analysis of a wide range of natural reinforcements. Detailed comparative studies about the factors that influence the fillers’ performance in the polymeric composites were also conducted to give the reader a comprehensive understanding to enable a better selection of the optimized characteristics to develop a more sustainable design. This systematic review indicates that the majority of green fillers had an adverse effect on the tensile strength of the considered matrices, but generally improved the tensile modulus. Moreover, the studied fillers enhanced the flexural modulus property for all mentioned matrices. The impact strength was dramatically influenced by the intrinsic characteristic of the filler type.

[1]  Ahmed Koubaa,et al.  Dielectric properties and thermal stability of cellulose high-density polyethylene bio-based composites , 2021 .

[2]  E. El-rafey,et al.  Wooden Polymer Composites of Poly(vinyl chloride), Olive Pits Flour, and Precipitated Bio-Calcium Carbonate , 2021, ACS omega.

[3]  A. Kiliç,et al.  Effect of compatibilizer and fiber loading on ensete fiber-reinforced HDPE green composites: Physical, mechanical, and morphological properties , 2021 .

[4]  V. Thakur,et al.  Toward chemically treated low-cost lignocellulosic parsley waste/polypropylene bio-composites for resourceful sustainable bio-products , 2021, International Journal of Environmental Science and Technology.

[5]  M. Hayajneh,et al.  Tribological and mechanical fracture performance of Mediterranean lignocellulosic fiber reinforced polypropylene composites , 2021, Polymer Composites.

[6]  C. Bendjaouahdou,et al.  Synthesis and characterization of polyvinyl chloride/wood flour/organoclay ternary composites , 2021, Polymers and Polymer Composites.

[7]  M. Hayajneh,et al.  Physical and Mechanical Inherent Characteristic Investigations of Various Jordanian Natural Fiber Species to Reveal Their Potential for Green Biomaterials , 2021, Journal of Natural Fibers.

[8]  J. A. Adebisi,et al.  Eggshell nanoparticle reinforced recycled low-density polyethylene: A new material for automobile application , 2021 .

[9]  Changlei Xia,et al.  Utilization of decayed wood for polyvinyl chloride/wood flour composites , 2021 .

[10]  Virendra Kumar,et al.  Physical and Mechanical Properties of Rambans (Agave) Fiber Reinforced with Polyester Composite Materials , 2021, Journal of Natural Fibers.

[11]  Md. Wahab Khan,et al.  Studies on morphological, physico-chemical and mechanical properties of wheat straw reinforced polyester resin composite , 2021, Polymer Bulletin.

[12]  Abdullah M. Asiri,et al.  Indian mallow fiber reinforced polyester composites: mechanical and thermal properties , 2021, Journal of Materials Research and Technology.

[13]  L. Mattoso,et al.  Thermo-physical and mechanical characteristics of composites based on high-density polyethylene (HDPE) e spent coffee grounds (SCG) , 2021, Journal of Polymers and the Environment.

[14]  A. Hejna,et al.  Coffee Silverskin as a Multifunctional Waste Filler for High-Density Polyethylene Green Composites , 2021, Journal of Composites Science.

[15]  F. Al-Oqla.  Performance trends and deteriorations of lignocellulosic grape fiber/polyethylene biocomposites under harsh environment for enhanced sustainable bio-materials , 2021, Cellulose.

[16]  M. Hayajneh,et al.  Hybrid green organic/inorganic filler polypropylene composites: Morphological study and mechanical performance investigations , 2021, e-Polymers.

[17]  R. Banat,et al.  Effect of coupling agents on the olive pomace-filled polypropylene composite , 2021 .

[18]  S. I. Talabi,et al.  Characterization of cellulose nano/microfibril reinforced polypropylene composites processed via solid‐state shear pulverization , 2021, Polymer Composites.

[19]  A. Guevara-Morales,et al.  Composite of polylactic acid and microcellulose from kombucha membranes , 2020 .

[20]  Md. Abu Sayeed,et al.  On the use of wood charcoal filler to improve the properties of natural fiber reinforced polymer composites , 2020 .

[21]  L. Toubal,et al.  Mechanical properties and drop-weight impact performance of injection-molded HDPE/birch fiber composites , 2020 .

[22]  M. Hasan,et al.  An Experimental Study of Physical, Mechanical, and Thermal Properties of Rattan-Bamboo Fiber Reinforced Hybrid Polyester Laminated Composite , 2020, Journal of Natural Fibers.

[23]  M. Koru,et al.  Investigation of the Thermal and Mechanical Properties of Organic Waste Reinforced Polyester Composites , 2020, Iranian Journal of Science and Technology, Transactions of Civil Engineering.

[24]  B. Smyth,et al.  Incorporation of poultry eggshell and litter ash as high loading polymer fillers in polypropylene , 2020, Composites Part C: Open Access.

[25]  M. Abdelhamed,et al.  Formulation and characterization of new ternary stable composites: Polyvinyl chloride-wood flour- calcium carbonate of promising physicochemical properties , 2020 .

[26]  F. Al-Oqla.  Flexural Characteristics and Impact Rupture Stress Investigations of Sustainable Green Olive Leaves Bio-composite Materials , 2020, Journal of Polymers and the Environment.

[27]  Anshul Yadav,et al.  Physical and Mechanical Behavior of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites , 2020, Journal of Natural Fibers.

[28]  Camila Cezar Grillo,et al.  Composites of Recycled Polypropylene from Cotton Swab Waste with Pyrolyzed Rice Husk , 2020, Journal of Polymers and the Environment.

[29]  O. Cherkaoui,et al.  The effect of nonwoven structure on thermomechanical properties of feather waste reinforced polyester composite , 2020, Journal of Industrial Textiles.

[30]  Reaz A. Chowdhury,et al.  Gas and Water Vapor Barrier Performance of Cellulose Nanocrystal–Citric Acid-Coated Polypropylene for Flexible Packaging , 2020 .

[31]  M. A. Abdul Karim,et al.  Sodium carbonate treatment of fibres to improve mechanical and water absorption characteristics of short bamboo natural fibres reinforced polyester composite , 2020, Plastics, Rubber and Composites.

[32]  Chi-Hui Tsou,et al.  Evaluating distillers grains as bio-fillers for high-density polyethylene , 2020, Journal of Polymer Research.

[33]  Youri Yang,et al.  Biodegradation of polyethylene: a brief review , 2020, Applied Biological Chemistry.

[34]  Shuaijun Liu,et al.  Performance analysis of four plant fiber/polyvinyl chloride composites under two degradation conditions with water or seawater with xenon lamp , 2020 .

[35]  J. L. Olajide,et al.  Mechanical properties of high density polyethylene matrix composites reinforced with chitosan particles , 2020, Materials Today: Proceedings.

[36]  K. Karakuş,et al.  Determination of Some Technological Properties of Injection Molded Pulverized-HDPE Based Composites Reinforced with Micronized Waste Tire Powder and Red Pine Wood Wastes , 2020, Journal of Polymers and the Environment.

[37]  Wenyu Lu,et al.  Biochar filled high-density polyethylene composites with excellent properties: Towards maximizing the utilization of agricultural wastes , 2020 .

[38]  Md Tareq Rahman,et al.  Recycling of Waste Materials for Asphalt Concrete and Bitumen: A Review , 2020, Materials.

[39]  F. Espinach,et al.  Impact Properties and Water Uptake Behavior of Old Newspaper Recycled Fibers-Reinforced Polypropylene Composites , 2020, Materials.

[40]  M. Skrifvars,et al.  Mechanical performance of hybrid bast and basalt fibers reinforced polymer composites , 2020, Journal of Polymer Research.

[41]  Rozli Zulkifli,et al.  MECHANICAL PROPERTIES OF GIGANTOCHLOA SCORTECHINII BAMBOO PARTICLE REINFORCED SEMIRIGID POLYVINYL CHLORIDE COMPOSITES , 2020 .

[42]  B. Y. Mekonnen,et al.  Tensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades , 2020 .

[43]  S. Tirkeş,et al.  Enhancement of mechanical, thermal and water uptake performance of TPU/jute fiber green composites via chemical treatments on fiber surface , 2020 .

[44]  J. A. Oyebanji,et al.  A paradigm shift on the impact of synthetic Agro waste nanoparticles materials for engineering diversity: A mini overview , 2020 .

[45]  M. Chavali,et al.  Compounding and the mechanical properties of catla fish scales reinforced-polypropylene composite–from biowaste to biomaterial , 2020, Advanced Composite Materials.

[46]  Uchechi C Mark,et al.  Influence of filler loading on the mechanical and morphological properties of carbonized coconut shell particles reinforced polypropylene composites , 2020, Journal of Composite Materials.

[47]  M. H. Alaaeddin,et al.  Physical and mechanical properties of polyvinylidene fluoride - Short sugar palm fiber nanocomposites , 2019, Journal of Cleaner Production.

[48]  R. Yahya,et al.  Impact and thermal analysis of heat-treated and untreated mangrove wood/high-density polyethylene composites , 2019, Polymer Bulletin.

[49]  Nitish Jha,et al.  Investigation on the mechanical, thermal propertiesof polyamide 6/polypropylene blends with natural talc as filler , 2019 .

[50]  B. Hankamer,et al.  Green Bioplastics as Part of a Circular Bioeconomy. , 2019, Trends in plant science.

[51]  K. Zia,et al.  A review on blending of corn starch with natural and synthetic polymers, and inorganic nanoparticles with mathematical modeling. , 2019, International journal of biological macromolecules.

[52]  K. Palanikumar,et al.  Mechanical Characteristics and Terminological Behavior Study on Natural Fiber Nano reinforced Polymer Composite – A Review , 2019, Materials Today: Proceedings.

[53]  Lei Wang,et al.  Effects of pretreatment on the soil aging behavior of rice husk fibers/polyvinyl chloride composites , 2018, BioResources.

[54]  B. K. Nanda,et al.  Polyvinyl Chloride Reinforced with Areca Sheath Fiber Composites—An Experimental Study , 2018, Journal of Natural Fibers.

[55]  A. Boudenne,et al.  Tensile properties, thermal conductivity, and thermal stability of short carbon fiber reinforced polypropylene composites , 2018 .

[56]  E. Gallo,et al.  Polylactic acid biocomposites: approaches to a completely green flame retarded polymer , 2017 .

[57]  Faris M. AL-Oqla,et al.  Investigating the mechanical performance deterioration of Mediterranean cellulosic cypress and pine/polyethylene composites , 2017, Cellulose.