Depolymerizable polymers: Preparation, applications, and future outlook

Depolymerizable polymers are stimuli-responsive materials triggered to depolymerize rapidly and completely into their constituent monomers on command. Applications include triggerable vehicles for controlled release, restructurable materials, disappearing or sacrificial composites, and lithographic resists. Owing to their widespread utility, significant efforts have aimed to prepare and explore depolymerizable polymers and their corresponding triggers. This “Prospective” highlights advances since their discovery over a half-century ago, discusses methods in their preparation, and presents recent developments in triggered depolymerization. It also surveys applications that harness these polymers’ unique properties, while offering insights into research directions that may contribute to progress in this dynamic field.

[1]  K. J. Ivin.  Thermodynamics of Addition Polymerization Processes , 1973 .

[2]  C. Marvel,et al.  The Reaction between Sulfur Dioxide and Olefins. II. Propylene , 1935 .

[3]  D. Shabat,et al.  Self-immolative comb-polymers: multiple-release of side-reporters by a single stimulus event. , 2008, Chemistry.

[4]  Jose M. Lobez,et al.  Disassembly of Elastomers: Poly(olefin sulfone)−Silicones with Switchable Mechanical Properties , 2010 .

[5]  M. J. Bowden,et al.  A New Family of Positive Electron Beam Resists—Poly(Olefin Sulfones) , 1973 .

[6]  Scott T. Phillips,et al.  Phase-Switching Depolymerizable Poly(carbamate) Oligomers for Signal Amplification in Quantitative Time-Based Assays , 2013 .

[7]  S. Tagami,et al.  Polymerization of Aromatic Aldehydes. VII. Cyclopolymerization of o-FormylphenylacetaIdehyde and Formation of a Cyclic Trimer , 1971 .

[8]  D. Shabat,et al.  The azaquinone-methide elimination: comparison study of 1,6- and 1,4-eliminations under physiological conditions. , 2008, Organic & biomolecular chemistry.

[9]  John A Rogers,et al.  Triggered Transience of Metastable Poly(phthalaldehyde) for Transient Electronics , 2014, Advanced materials.

[10]  Andrew T. Russell,et al.  Self-immolative linkers in polymeric delivery systems , 2011 .

[11]  N. Grassie,et al.  The thermal degradation of polysiloxanes—I. Poly(dimethylsiloxane) , 1978 .

[12]  Adah Almutairi,et al.  Low power, biologically benign NIR light triggers polymer disassembly. , 2011, Macromolecules.

[13]  Hiroshi Ito,et al.  Thermally Developable, Positive Resist Systems with High Sensitivity , 1989 .

[14]  O. Vogl.  Kinetics of Aldehyde Polymerization , 1975 .

[15]  Adah Almutairi,et al.  A Single UV or Near IR Triggering Event Leads to Polymer Degradation into Small Molecules. , 2012, ACS macro letters.

[16]  S. Oikawa,et al.  Acid‐catalyzed degradation mechanism of poly(phthalaldehyde): Unzipping reaction of chemical amplification resist , 1997 .

[17]  Andrew J Boydston,et al.  1,2-oxazine linker as a thermal trigger for self-immolative polymers , 2014 .

[18]  G. Odian,et al.  Principles of polymerization , 1981 .

[19]  Elizabeth R Gillies,et al.  Amplified release through the stimulus triggered degradation of self-immolative oligomers, dendrimers, and linear polymers. , 2012, Advanced drug delivery reviews.

[20]  E. Gillies,et al.  Kinetics of Self-Immolative Degradation in a Linear Polymeric System: Demonstrating the Effect of Chain Length , 2013 .

[21]  Philippe Dubois,et al.  Probe‐Based 3‐D Nanolithography Using Self‐Amplified Depolymerization Polymers , 2010, Advanced materials.

[22]  E. Gillies,et al.  Multiresponsive Azobenzene End-Cap for Self-Immolative Polymers. , 2014, ACS macro letters.

[23]  Adah Almutairi,et al.  UV and near-IR triggered release from polymeric nanoparticles. , 2010, Journal of the American Chemical Society.

[24]  L. F. Thompson,et al.  Electron irradiation of poly(olefin sulfones). Application to electron beam resists , 1973 .

[25]  S. Köstler.  Polyaldehydes: homopolymers, block copolymers and promising applications , 2012 .

[26]  Scott T. Phillips,et al.  Reproducible and Scalable Synthesis of End-Cap-Functionalized Depolymerizable Poly(phthalaldehydes) , 2013 .

[27]  Hiroshi Ito,et al.  Thermally Developable, Positive Tone, Oxygen RIE Barrier Resist for Bilayer Lithography , 1989 .

[28]  J. F. Whitney,et al.  Fine structure of acetal resins and its effect on mechanical properties , 1959 .

[29]  Scott R White,et al.  Programmable microcapsules from self-immolative polymers. , 2010, Journal of the American Chemical Society.

[30]  M. Bowden,et al.  Poly(Vinyl Arene Sulfones) as Novel Positive Photoresists , 1975 .

[31]  Felix Holzner,et al.  Directed placement of gold nanorods using a removable template for guided assembly. , 2011, Nano letters.

[32]  Adah Almutairi,et al.  Intramolecular Cyclization for Stimuli-Controlled Depolymerization of Polycaprolactone Particles Leading to Disassembly and Payload Release. , 2013, ACS macro letters.

[33]  S. T. Phillips,et al.  Effects of electronics, aromaticity, and solvent polarity on the rate of azaquinone-methide-mediated depolymerization of aromatic carbamate oligomers. , 2013, The Journal of organic chemistry.

[34]  D. Weitz,et al.  Stimuli-Responsive Core–Shell Microcapsules with Tunable Rates of Release by Using a Depolymerizable Poly(phthalaldehyde) Membrane , 2013 .

[35]  P. Dubois,et al.  Control over molar mass, dispersity, end-groups and kinetics in cyclopolymerization of ortho-phthalaldehyde: adapted choice of a phosphazene organocatalyst , 2014 .

[36]  E. W. Meijer,et al.  Depolymerizable, adaptive supramolecular polymer nanoparticles and networks , 2014 .

[37]  C. Brachais,et al.  Poly(methylglyoxylate), a biodegradable polymeric material for new drug delivery systems , 1998 .

[38]  J. H. O′donnell,et al.  The Degradation of Poly(butene-1 sulfone) during γ Irradiation , 1970 .

[39]  E. Gillies,et al.  Design, Synthesis and Assembly of Self-Immolative Linear Block Copolymers , 2011 .

[40]  Nancy R. Sottos,et al.  Triggered Release from Polymer Capsules , 2011 .

[41]  Joshua A. Kaitz,et al.  Dynamic Covalent Macrocyclic Poly(phthalaldehyde)s: Scrambling Cyclic Homopolymer Mixtures Produces Multi-Block and Random Cyclic Copolymers , 2013 .

[42]  R. N. MacDonald,et al.  Thermally stable high molecular weight polyoxymethylenes , 1959 .

[43]  Heather J Kulik,et al.  Mechanically triggered heterolytic unzipping of a low-ceiling-temperature polymer , 2014, Nature Chemistry.

[44]  K. J. Ivin.  Thermodynamics of addition polymerization , 2000 .

[45]  Scott T. Phillips,et al.  End-Capped Poly(benzyl ethers): Acid and Base Stable Polymers That Depolymerize Rapidly from Head-to-Tail in Response to Specific Applied Signals , 2013 .

[46]  Guoying Zhang,et al.  Self-immolative polymersomes for high-efficiency triggered release and programmed enzymatic reactions. , 2014, Journal of the American Chemical Society.

[47]  Elizabeth R Gillies,et al.  A cascade biodegradable polymer based on alternating cyclization and elimination reactions. , 2009, Journal of the American Chemical Society.

[48]  Pavel Kratochvíl,et al.  Glossary of basic terms in polymer science (IUPAC Recommendations 1996) , 1996 .

[49]  C. Marvel,et al.  The Reaction between Sulfur Dioxide and Olefins. Cyclohexene , 1934 .

[50]  O. Vogl,et al.  Polymerization of higher aldehydes. VI. Mechanism of aldehyde polymerization , 1964 .

[51]  G. F. Leverett,et al.  The effect of solvents on high molecular weight, stable acetal resins , 1959 .

[52]  H. Inoue,et al.  Decomposition of poly(4‐hydroxystyrene sulfone) in alkaline aqueous solutions , 2000 .

[53]  T. Bowmer,et al.  Radiation Degradation of Poly(olefin Sulfone)s: A Volatile Product Study , 1982 .

[54]  G. Taylor,et al.  Oxygen plasma removal of thin polymer films , 1980 .

[55]  O. Vogl.  Addition polymers of aldehydes , 2000 .

[56]  Scott T. Phillips,et al.  Patterned plastics that change physical structure in response to applied chemical signals. , 2010, Journal of the American Chemical Society.

[57]  Li Tang,et al.  Chain-shattering polymeric therapeutics with on-demand drug-release capability. , 2013, Angewandte Chemie.

[58]  Joshua A. Kaitz,et al.  End group characterization of poly(phthalaldehyde): surprising discovery of a reversible, cationic macrocyclization mechanism. , 2013, Journal of the American Chemical Society.

[59]  Joshua A. Kaitz,et al.  Functional Phthalaldehyde Polymers by Copolymerization with Substituted Benzaldehydes , 2013 .

[60]  Ludovico Cademartiri,et al.  Concepts of Nanochemistry , 2009 .

[61]  C. Grant Willson,et al.  Organic Resist Materials — Theory and Chemistry , 1983 .

[62]  Jose M. Lobez,et al.  Radiation detection: resistivity responses in functional poly(olefin sulfone)/carbon nanotube composites. , 2009, Angewandte Chemie.

[63]  Joshua A. Kaitz,et al.  Copolymerization of o-Phthalaldehyde and Ethyl Glyoxylate: Cyclic Macromolecules with Alternating Sequence and Tunable Thermal Properties , 2014 .

[64]  Scott T. Phillips,et al.  Continuous Head-to-Tail Depolymerization: An Emerging Concept for Imparting Amplified Responses to Stimuli-Responsive Materials. , 2014, ACS macro letters.

[65]  Phil S Baran,et al.  Activity-linked labeling of enzymes by self-immolative polymers. , 2009, Bioconjugate chemistry.

[66]  Bernd Gotsmann,et al.  Probe-Based Nanolithography: Self-Amplified Depolymerization Media for Dry Lithography , 2010 .

[67]  O. Vogl,et al.  Polymerization of higher aldehydes. VII. Tacticity of elastomeric polyacetaldehyde , 1964 .

[68]  Claude Bunel,et al.  Synthesis, characterization and stabilization of poly(methyl glyoxylate) , 1997 .

[69]  D. Shabat,et al.  Quinone-methide species, a gateway to functional molecular systems: from self-immolative dendrimers to long-wavelength fluorescent dyes. , 2014, Accounts of chemical research.

[70]  Scott T. Phillips,et al.  Accessibility of Responsive End-Caps in Films Composed of Stimuli-Responsive, Depolymerizable Poly(phthalaldehydes) , 2013 .

[71]  G. Chiu,et al.  The synthesis and evaluation of cyclic olefin sulfone copolymers and terpolymers as electron beam resists , 1977 .

[72]  T. Kunitake,et al.  Polymerization of aromatic aldehydes. II. Cationic cyclopolymerization of phthalaldehyde , 1969 .

[73]  D. Shabat,et al.  Self-immolative dendrimers: A distinctive approach to molecular amplification , 2010 .

[74]  C. Barner‐Kowollik,et al.  Polyphthalaldehyde-block-polystyrene as a nanochannel template. , 2014, Journal of materials chemistry. B.

[75]  C. Willson,et al.  Chemical amplification in the design of dry developing resist materials , 1983 .

[76]  Mathieu L. Viger,et al.  Highest Efficiency Two-Photon Degradable Copolymer for Remote Controlled Release. , 2013, ACS macro letters.

[77]  C. Bunel,et al.  The ionic polymerizations of methyl glyoxylate , 1994 .

[78]  O. Vogl.  The polymerization of aldehydes , 1960 .

[79]  N. Grassie,et al.  THERMAL DEGRADATION OF POLYMERS. , 1964 .

[80]  H. Goodman,et al.  Physical properties of high molecular weight acetal resins , 1959 .

[81]  C. Marvel,et al.  The Reaction between Sulfur Dioxide and Olefins. III.1 Higher Olefins and Some Limitations of the Reaction , 1935 .

[82]  P. Kubisa,et al.  Polymerization of higher aldehydes , 1980 .

[83]  S. Tagami,et al.  Polymerization of Aromatic Aldehydes. III. The Cyclopolymerization of Phthaldehyde and the Structure of the Polymer , 1969 .

[84]  H. Yaguchi,et al.  Photoinduced unzipping depolymerization of poly(olefin sulfone)s possessing photobase generator and base amplifier , 2009 .

[85]  Joshua A. Kaitz,et al.  Divergent Macrocyclization Mechanisms in the Cationic Initiated Polymerization of Ethyl Glyoxylate , 2014 .

[86]  E. Gillies,et al.  Self-Immolative Polymers Containing Rapidly Cyclizing Spacers: Toward Rapid Depolymerization Rates , 2012 .

[87]  C. Aso.  Cyclopolymerization of bifunctional monomers , 1970 .

[88]  Andrew J. Boydston,et al.  Controlled Depolymerization: Stimuli-Responsive Self-Immolative Polymers , 2012 .

[89]  H. Oulyadi,et al.  Study of the in vitro degradation of poly(ethyl glyoxylate) , 2008 .

[90]  H. Yaguchi,et al.  Photoinduced Depolymerization of Poly(olefin sulfone)s Possessing Photobase Generating Groups in the Side Chain , 2007 .

[91]  P. E. Lindvig,et al.  Molecular structure of high molecular weight acetal resins , 1959 .

[92]  K. J. Ivin,et al.  Effect of olefin structure on the ceiling temperature for olefin polysulfone formation , 1957 .

[93]  K. J. Ivin,et al.  Some thermodynamic and kinetic aspects of addition polymerisation , 1958 .

[94]  N. Brown.  Polymerization of Formaldehyde , 1967 .

[95]  Scott T. Phillips,et al.  Amplified responses in materials using linear polymers that depolymerize from end‐to‐end when exposed to specific stimuli , 2014 .

[96]  Bo Fan,et al.  Polyglyoxylates: a versatile class of triggerable self-immolative polymers from readily accessible monomers. , 2014, Journal of the American Chemical Society.

[97]  J. H. O′donnell,et al.  γ Radiolysis of poly (butene-1 sulfone) and poly(hexene-1 sulfone) , 1972 .

[98]  Kazuo Tanaka,et al.  Photo-triggered molecular release based on auto-degradable polymer-containing organic-inorganic hybrids. , 2014, Bioorganic & medicinal chemistry.

[99]  S. T. Phillips,et al.  Self-powered microscale pumps based on analyte-initiated depolymerization reactions. , 2012, Angewandte Chemie.

[100]  C. Willson,et al.  Approaches to the Design of Radiation‐Sensitive Polymeric Imaging Systems with Improved Sensitivity and Resolution , 1986 .

[101]  K. J. Ivin,et al.  Reversibility of the Propagation Reaction in Polymerization Processes and its Manifestation in the Phenomenon of a ‘Ceiling Temperature’ , 1948, Nature.

[102]  E. Gillies,et al.  A reduction sensitive cascade biodegradable linear polymer , 2010 .

[103]  H. Sawada.  Thermodynamics of Polymerization. IV. Thermodynamics of Equilibrium Polymerization , 1972 .