Analysis of demagnetization faults in surface-mounted permanent magnet synchronous motors with symmetric windings

This paper analyzes a surface-mounted permanent magnet synchronous motor with symmetric winding configuration running under demagnetization fault. The analysis is based on 2D FEM simulations which includes rotor magnet skewed effects. Two types of demagnetization are analyzed; uniform and local demagnetization. It is proposed the use of zero-sequence voltage component for fault diagnosis purposes. Simulations and experimental results show the suitability of the method.

[1]  T.G. Habetler,et al.  Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines , 2007, IEEE Transactions on Power Electronics.

[2]  T. Sebastian,et al.  Fault analysis of a PM brushless DC Motor using finite element method , 2005, IEEE Transactions on Energy Conversion.

[3]  Renyuan Tang,et al.  Demagnetization Analysis of Permanent Magnet Synchronous Machines under Short Circuit Fault , 2010, 2010 Asia-Pacific Power and Energy Engineering Conference.

[4]  G. Scelba,et al.  Signal processing of zero sequence voltage technique , 2007, 2007 European Conference on Power Electronics and Applications.

[5]  M. Rosu,et al.  Hysteresis model for finite-element analysis of permanent-magnet demagnetization in a large synchronous motor under a fault condition , 2005, IEEE Transactions on Magnetics.

[6]  I. Husain,et al.  Permanent Magnet Synchronous Motor Magnet Designs with Skewing for Torque Ripple and Cogging Torque Reduction , 2007 .

[7]  Domenico Casadei,et al.  Magnets faults characterization for Permanent Magnet Synchronous Motors , 2009, 2009 IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives.

[8]  Ju Lee,et al.  The Shape Design of Permanent Magnet for Permanent Magnet Synchronous Motor Considering Partial Demagnetization , 2006, IEEE Transactions on Magnetics.

[9]  Philippe Weber,et al.  Fault tolerant control of a three-phase three-wire shunt active filter system based on reliability analysis , 2009 .

[10]  Jordi-Roger Riba,et al.  A Simple 2-D Finite-Element Geometry for Analyzing Surface-Mounted Synchronous Machines With Skewed Rotor Magnets , 2010, IEEE Transactions on Magnetics.

[11]  Dieter Gerling,et al.  Skewing effect on the PM Flux-Linkage high harmonics of the PM machines with delta winding , 2009, 2009 13th European Conference on Power Electronics and Applications.

[12]  Fernando Briz,et al.  High-Frequency Carrier-Signal Voltage Selection for Stator Winding Fault Diagnosis in Inverter-Fed AC Machines , 2008, IEEE Transactions on Industrial Electronics.

[13]  L. Romeral,et al.  Detection of Demagnetization Faults in Permanent-Magnet Synchronous Motors Under Nonstationary Conditions , 2009, IEEE Transactions on Magnetics.

[14]  Leila Parsa,et al.  Interior Permanent Magnet Motors With Reduced Torque Pulsation , 2008, IEEE Transactions on Industrial Electronics.

[15]  O. Carlson,et al.  Control Algorithms for a Fault-Tolerant PMSM Drive , 2007, IEEE Transactions on Industrial Electronics.