Numerical analysis of molten metal behavior and undercut formation in high-speed GMAW

[1]  Chuansong Wu,et al.  A comparison of double shielded GMAW-P with conventional GMAW-P in the arc, droplet and bead formation , 2020 .

[2]  F. Lu,et al.  Influence of interwire angle on undercutting formation and arc behavior in pulsed tandem narrow-gap GMAW , 2020 .

[3]  Chuansong Wu,et al.  Influence of arc interactions on heat and mass transfer during a two-arc hybrid welding , 2020 .

[4]  Chuansong Wu,et al.  A comparison of TIG-MIG hybrid welding with conventional MIG welding in the behaviors of arc, droplet and weld pool , 2019, Journal of Materials Processing Technology.

[5]  G. Qin,et al.  A theoretical study of molten pool behavior and humping formation in full penetration high-speed gas tungsten arc welding , 2019, International Journal of Heat and Mass Transfer.

[6]  Guoliang Qin,et al.  Sensitivity of driving forces on molten pool behavior and defect formation in high-speed gas tungsten arc welding , 2017 .

[7]  Guoliang Qin,et al.  Numerical analysis of undercut defect mechanism in high speed gas tungsten arc welding , 2016 .

[8]  Kenan Genel,et al.  Stress concentration effects of undercut defect and reinforcement metal in butt welded joint , 2010 .

[9]  Takayoshi Ohji,et al.  Mathematical modeling of metal active gas (MAG) arc welding , 2009 .

[10]  T. DebRoy,et al.  Unusual wavy weld pool boundary from dimensional analysis , 2009 .

[11]  Dave F. Farson,et al.  Understanding Bead Hump Formation in Gas Metal Arc Welding Using a Numerical Simulation , 2007 .

[12]  H. W. Kerr,et al.  High speed fusion weld bead defects , 2006 .

[13]  Thomas W. Eagar,et al.  Penetration and defect formation in high-current arc welding , 2003 .

[14]  Stan A David,et al.  Physical processes in fusion welding , 1995 .

[15]  H W Sudnik,et al.  RESEARCH INTO FUSION WELDING TECHNOLOGIES BASED ON PHYSICAL-MATHEMATICAL MODELS , 1991 .

[16]  Kenneth C. Mills,et al.  Factors affecting variable weld penetration , 1990 .

[17]  T. DebRoy,et al.  Surface tension of binary metal—surface active solute systems under conditions relevant to welding metallurgy , 1988 .

[18]  Thomas W. Eagar,et al.  Pressures produced by gas tungsten arcs , 1986 .

[19]  Thomas W. Eagar,et al.  Distribution of the heat and current fluxes in gas tungsten arcs , 1985 .