Influence and error transfer in assembly process of geometric errors of a translational axis on volumetric error in machine tools

Abstract The geometric errors of a translational axis are important factors influencing the volumetric error of machine tools. Error relationship in the assembly process of a translational axis quantitatively remains an open problem. In the paper, the slide guideway, forming the translational axis, has been decomposed into three key parts as the base, slider and carriage. New error transfer relationship model has been proposed in the assembly process. Volumetric error model of the horizontal machine tool is established and influence of the assembly error parameter on the volumetric error is analyzed with the two error models. Measurement experiments for the slide guideway has been carried out and the error transfer model has been verified. The proposed error transfer relationship model, as well as the error effects analysis method, provides important theoretical guide basis to optimize manufacture and assembly of a translational axis in a scientific and reasonable way.

[1]  Gholamreza Akbarizadeh,et al.  A New Statistical-Based Kurtosis Wavelet Energy Feature for Texture Recognition of SAR Images , 2012, IEEE Transactions on Geoscience and Remote Sensing.

[2]  Hong Ya Fu,et al.  A Review of Geometric Error Modeling and Error Detection for CNC Machine Tool , 2013 .

[3]  Seng Khim,et al.  Modeling the Volumetric Errors in Calibration of Five-axis CNC Machine , 2010 .

[4]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .

[5]  Paweł Majda.  Modeling of geometric errors of linear guideway and their influence on joint kinematic error in machine tools , 2012 .

[6]  Wanqun Chen,et al.  Volumetric error modeling and sensitivity analysis for designing a five-axis ultra-precision machine tool , 2013 .

[7]  Xin-Jun Liu,et al.  Geometric error modeling and sensitivity analysis of a five-axis machine tool , 2016 .

[8]  Soichi Ibaraki,et al.  Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools , 2011 .

[9]  Gholamreza Akbarizadeh,et al.  Integration of Spectral Histogram and Level Set for Coastline Detection in SAR Images , 2019, IEEE Transactions on Aerospace and Electronic Systems.

[10]  Gedong Jiang,et al.  Position-independent geometric error identification and global sensitivity analysis for the rotary axes of five-axis machine tools , 2017 .

[11]  Gholamreza Akbarizadeh,et al.  Detection of Lung Nodules in CT Scans Based on Unsupervised Feature Learning and Fuzzy Inference , 2016 .

[12]  Matthias Nießner,et al.  3DMatch: Learning Local Geometric Descriptors from RGB-D Reconstructions , 2016, 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR).

[13]  Seung-Han Yang,et al.  Measurement of geometric errors in a miniaturized machine tool using capacitance sensors , 2005 .

[14]  Robert Schmitt,et al.  Geometric error measurement and compensation of machines : an update , 2008 .

[15]  Yan Yan,et al.  Robust geometric model fitting based on iterative Hypergraph Construction and Partition , 2019, Neurocomputing.

[16]  Yu Wu,et al.  The Kinematic Invariants in Testing Error Motion of Machine Tool Linear Axes , 2016 .

[17]  Peihua Gu,et al.  An analytical approach for crucial geometric errors identification of multi-axis machine tool based on global sensitivity analysis , 2014 .

[18]  Aun-Neow Poo,et al.  Error compensation in machine tools — a review: Part I: geometric, cutting-force induced and fixture-dependent errors , 2000 .

[19]  Yusuf Altintas,et al.  Modeling and compensation of volumetric errors for five-axis machine tools , 2016 .

[20]  Edward Chlebus,et al.  Modelling and calculation of properties of sliding guideways , 1999 .

[21]  Behrooz Arezoo,et al.  Accuracy improvement of volumetric error modeling in CNC machine tools , 2018 .

[22]  Seyed Reza Besharati,et al.  Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes , 2017 .

[23]  Soichi Ibaraki,et al.  Construction of an error map of rotary axes on a five-axis machining center by static R-test , 2011 .

[24]  Jindong Wang,et al.  Geometric error identification algorithm of numerical control machine tool using a laser tracker , 2016 .

[25]  Jun Zha,et al.  Motion straightness of hydrostatic guideways considering the ratio of pad center spacing to guide rail profile error wavelength , 2016 .

[26]  Kuang-Chao Fan,et al.  Sensitivity analysis of the 3-PRS parallel kinematic spindle platform of a serial-parallel machine tool , 2003 .

[27]  Frank Kreith,et al.  The CRC handbook of mechanical engineering , 1998 .

[28]  Hongqi Liu,et al.  Volumetric error modeling, identification and compensation based on screw theory for a large multi-axis propeller-measuring machine , 2018 .

[29]  Jie Li,et al.  Geometric error identification and compensation of linear axes based on a novel 13-line method , 2016 .

[30]  Gholamreza Akbarizadeh,et al.  Optimized fuzzy cellular automata for synthetic aperture radar image edge detection , 2018 .

[31]  Asma Raeisi,et al.  Combined Method of an Efficient Cuckoo Search Algorithm and Nonnegative Matrix Factorization of Different Zernike Moment Features for Discrimination Between Oil Spills and Lookalikes in SAR Images , 2018, IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing.

[32]  J.R.R. Mayer,et al.  Investigation of accuracy of aerostatic guideways , 2009 .

[33]  Gholamreza Akbarizadeh,et al.  Ship Classification in SAR Images Using a New Hybrid CNN–MLP Classifier , 2018, Journal of the Indian Society of Remote Sensing.

[34]  A. Slocum,et al.  Precision Machine Design , 1992 .

[35]  Wei Gao,et al.  A three-probe system for measuring the parallelism and straightness of a pair of rails for ultra-precision guideways , 2007 .

[36]  Gholamreza Akbarizadeh,et al.  Effective supervised multiple-feature learning for fused radar and optical data classification , 2017 .

[37]  P. Gu,et al.  Accurate identification and compensation of geometric errors of 5-axis CNC machine tools using double ball bar , 2016 .

[38]  J.R.R. Mayer,et al.  Relationships between straightness and angular kinematic errors in machines , 2007 .

[39]  Zhengchun Du,et al.  Development of a multi-step measuring method for motion accuracy of NC machine tools based on cross grid encoder , 2010 .

[40]  Zhiwei Wang,et al.  Research on error averaging effect of hydrostatic guideways , 2012 .

[41]  Jixiang Yang,et al.  A new position independent geometric errors identification model of five-axis serial machine tools based on differential motion matrices , 2016 .