Pullout tests on single and double soil nails were conducted in a model sandbox. The test parameters included variations in the surface roughness, the ratio of nail length to nail diameter, the overburden pressure, and the distance between two nails. The characteristic of a single asperity, the asperity number per unit length, and the ratio of the thread depth to the soil particle size were used to define the surface roughness factor. The test results showed that the apparent friction coefficients at the soilnail interface were dependent upon the surface roughness of the nail. Group efficiency was used to evaluate the effectiveness of a nail when installed within a group. The test results showed that the group efficiency of a double-nail system was dependent upon the surface roughness factor and has a linear relationship with the nail distance until 100% efficiency is reached. The minimum required distance for 100% efficiency also varied with the surface roughness factor.Key words: apparent friction coef...
[1]
Peter L. Nicholson.
Soil Nailing a Wall
,
1986
.
[2]
G. W. E. Milligan,et al.
THE PULL-OUT RESISTANCE OF MODEL SOIL NAILS
,
1998
.
[3]
K. Y. Yong,et al.
PULL-OUT RESISTANCE MECHANISM OF A SOIL NAIL REINFORCEMENT IN DILATIVE SOILS
,
2000
.
[4]
R. A. Jewell,et al.
Analysis for Soil Reinforcement with Bending Stiffness
,
1992
.
[5]
Martin John Pedley.
The performance of soil reinforcement in bending and shear
,
1990
.
[6]
Pierre Delage,et al.
French National Research Project on Soil Nailing: Clouterre
,
1990
.
[7]
B. Low,et al.
EXPERIMENTAL NAILED SOIL WALLS
,
1997
.
[8]
Elias,et al.
SOIL NAILING FOR STABILIZATION OF HIGHWAY SLOPES AND EXCAVATIONS. FINAL REPORT
,
1991
.
[9]
Nicholas Sitar,et al.
Deformation-based model for reinforced sand
,
1990
.