Prediction of RCF Damage on Underground Metro Lines

London Underground (LUL) is one of the largest metro networks in the world and carried nearly 1.5 billion passengers in 2015. This increasing passenger demand leads to higher axle loads and shorter headways in the railway operations. However, this has a detrimental impact on the damage generated at the wheel-rail interface. In spite of the advances in rolling stock and track engineering, new developments in material manufacturing methods and rail inspection technology, cracking in rails still remains a major concern for infrastructure managers in terms of safety and maintenance costs. In this study, field data from two metro lines on the LUL network was analysed to identify the distribution and severity of the different damage types. Detailed vehicle dynamics route simulations were conducted for the lines and the calculated wheel-rail forces were investigated to assess the applicability current models for the prediction of rail damage on metro lines. These models include the Whole Life Rail Model (WLRM), previously developed for Great Britain (GB) main line tracks, and Shakedown theory. The influence of key factors such as curve radius, different friction conditions, track irregularities and wheel-rail profiles on the wheel-rail contact interface have been evaluated and compared with outputs from simulations on mainline routes. The study found that the contact patch energy (Tγ) and the interaction between wear and RCF in rails were highly influenced by the characteristics of metro tracks. It was also shown that both the Tγ and Shakedown methods can provide successful prediction of damage susceptibility of rails. However, in order to increase the accuracy of damage predictions and to ascertain the severity of different damage types, the duty conditions which are observed by the rail and the changes in contact conditions resulting from the successive vehicle passes should be considered in the modelling.

[1]  Elena Kabo,et al.  PREDICTING ROLLING CONTACT FATIGUE OF RAILWAY WHEELS , 2001 .

[2]  G. Valenta,et al.  Investigations of rail fractures at vienna underground and measures to reduce them , 2013 .

[3]  Rolf Dollevoet,et al.  Influence of wheel–rail contact modelling on vehicle dynamic simulation , 2015 .

[4]  Jonas W. Ringsberg,et al.  Life prediction of rolling contact fatigue crack initiation , 2001 .

[5]  R. Carroll.  Surface metallurgy and rolling contact fatigue of rail , 2006 .

[6]  R. Stock,et al.  The effects of top of rail friction modifier on wear and rolling contact fatigue : Full-scale rail-wheel test rig evaluation, analysis and modelling , 2008 .

[7]  Rickard Nilsson,et al.  Surface cracks and wear of rail: A full-scale test on a commuter train track , 2002 .

[8]  Jonas W. Ringsberg,et al.  On propagation of short rolling contact fatigue cracks , 2003 .

[9]  C. Persson,et al.  Interaction between cracks and microstructure in three dimensions for rolling contact fatigue in railway rails , 2014 .

[10]  We Glavin,et al.  Heavy Haul: The Burlington Northern Perspective , 1989 .

[11]  J. Beynon,et al.  Prediction of fatigue crack initiation for rolling contact fatigue , 2000 .

[12]  E. Vollebregt,et al.  Numerical modeling of measured railway creep versus creep-force curves with CONTACT , 2014 .

[13]  K. Johnson,et al.  Plastic flow and shakedown of the rail surface in repeated wheel—rail contact , 1991 .

[14]  Anders Ekberg,et al.  The development of a crack propagation model for railway wheels and rails , 2015 .

[15]  C. Esveld,et al.  An investigation into the causes of squats—Correlation analysis and numerical modeling , 2008 .

[16]  Felix Schmid,et al.  MANAGING THE CRITICAL WHEEL/RAIL INTERFACE , 2002 .

[17]  John H. Beynon,et al.  The effect of strain hardening on shakedown limits of a pearlitic rail steel , 1997 .

[18]  Wenyi Yan,et al.  Applicability of the Hertz contact theory to rail-wheel contact problems , 2000 .

[19]  Muhammad Umer Nawaz.  Estimation of running resistance in train tunnels , 2015 .

[20]  M. Kaneta,et al.  Propagation of Semi-Elliptical Surface Cracks in Lubricated Rolling/Sliding Elliptical Contacts , 1991 .

[21]  Jonas W. Ringsberg,et al.  Shear mode growth of short surface-breaking RCF cracks , 2005 .

[22]  K. Johnson,et al.  Application of the kinematical shakedown theorem to rolling and sliding point contacts , 1985 .

[23]  Yi Zhu,et al.  Tribology of the wheel–rail contact – aspects of wear, particle emission and adhesion , 2013 .

[24]  Andrew S. J. Smith,et al.  Judicious selection of available rail steels to reduce life-cycle costs , 2018, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit.

[25]  Ajay Kapoor,et al.  Modelling and full-scale trials to investigate fluid pressurisation of rolling contact fatigue cracks , 2008 .

[26]  S L Grassie,et al.  Studs: a squat-type defect in rails , 2012 .

[27]  Eric Magel.  Validation of Electromagnetic Walking Stick Rail Surface Crack Measuring Systems , 2016 .

[28]  Nasim Larijani,et al.  Anisotropy in pearlitic steel subjected to rolling contact fatigue - modelling and experiments , 2014 .

[29]  R. Dollevoet.  Design of an anti head check profile based on stress relief , 2010 .

[30]  Francis Franklin,et al.  Ratcheting and fatigue-led wear in rail-wheel contact , 2003 .

[31]  S. Bogdański,et al.  3D model of liquid entrapment mechanism for rolling contact fatigue cracks in rails , 2008 .

[32]  W. Zhong,et al.  Experimental investigation between rolling contact fatigue and wear of high-speed and heavy-haul railway and selection of rail material , 2011 .

[33]  V. Radhakrishnan,et al.  Plastic deformation in rolling contact , 1975 .

[34]  Simon Iwnicki,et al.  Comparison of wheel–rail contact codes for railway vehicle simulation: an introduction to the Manchester Contact Benchmark and initial results , 2008 .

[35]  X. Zhao.  Dynamic Wheel/Rail Rolling Contact at Singular Defects with Application to Squats , 2012 .

[36]  René Heyder,et al.  Empirical studies of head check propagation on the DB network , 2014 .

[37]  J. R. Evans,et al.  Optimising the wheel/rail interface on a modern urban rail system , 2008 .

[38]  M. Berg,et al.  Impact of non-elliptic contact modelling in wheel wear simulation , 2008 .

[39]  D. Scott.  Managing the wheel–rail interface: Europe Metro experience on the London Underground Victoria Line , 2009 .

[40]  Candida Petrogalli,et al.  Competition between wear and rolling contact fatigue at the wheel—rail interface: some experimental evidence on rail steel , 2009 .

[41]  M. C. Dubourg,et al.  A Predictive Rolling Contact Fatigue Crack Growth Model: Onset of Branching, Direction, and Growth—Role of Dry and Lubricated Conditions on Crack Patterns , 2002 .

[42]  Sebastian Stichel,et al.  Investigation of the risk for rolling contact fatigue on wheels of different passenger trains , 2008 .

[43]  Stuart L. Grassie,et al.  Rolling contact fatigue on the British railway system: treatment , 2005 .

[44]  Matin Shahzamanian Sichani.  Wheel-rail contact modelling in vehicle dynamics simulation , 2013 .

[45]  U. Olofsson,et al.  Mapping rail wear regimes and transitions , 2004 .

[46]  W. R. Tyfour.  Interaction between wear and rolling contact fatigue in pearlitic rail steels. , 1995 .

[47]  Bob Mitchell.  Jubilee Line Extension: From Concept to Completion , 2003 .

[48]  M. D. Bryant,et al.  A Pitting Model for Rolling Contact Fatigue , 1983 .

[49]  M. W. Brown,et al.  Modelling the three-dimensional behaviour of shallow rolling contact fatigue cracks in rails , 2002 .

[50]  K. Johnson,et al.  A Graphical Approach to Shakedown in Rolling Contact , 1990 .

[51]  John H. Beynon,et al.  Computer simulation of strain accumulation and hardening for pearlitic rail steel undergoing repeated contact , 2004 .

[52]  R. Heyder,et al.  Application of fracture mechanics methods to rail design and maintenance , 2009 .

[53]  Francis Franklin,et al.  Management and understanding of rolling contact fatigue: WP1 mechanisms of crack initiation: final report , 2008 .

[54]  T. M. Beagley.  SEVERE WEAR OF ROLLING/SLIDING CONTACTS , 1976 .

[55]  Roger Lewis,et al.  Wheel and rail wear—Understanding the effects of water and grease , 2014 .

[56]  Ajay Kapoor,et al.  Growth of multiple rolling contact fatigue cracks driven by rail bending modelled using a boundary element technique , 2003 .

[57]  Francis Franklin,et al.  Visualization and Modelling to Understand Rail Rolling Contact Fatigue Cracks in Three Dimensions , 2010 .

[58]  K. Johnson.  The Strength of Surfaces in Rolling Contact , 1989 .

[59]  Michele Ciavarella,et al.  Shakedown analyses for rolling and sliding contact problems , 2006 .

[60]  Jorge Ambrósio,et al.  Development of a wear prediction tool for steel railway wheels using three alternative wear functions , 2011 .

[61]  J. Ambrósio,et al.  Mapping railway wheel material wear mechanisms and transitions , 2010 .

[62]  A. Bower.  The influence of crack face friction and trapped fluid on surface initiated rolling contact fatigue cracks , 1988 .

[63]  G. Chattopadhyay,et al.  Decision on economical rail grinding interval for controlling rolling contact fatigue , 2005, Int. Trans. Oper. Res..

[64]  Simon Iwnicki,et al.  Vehicle dynamics and the wheel/rail interface , 2002 .

[66]  Ulf Olofsson,et al.  Adhesion and friction modification , 2009 .

[67]  Mats Berg,et al.  COMPARISON OF NON-ELLIPTIC CONTACT MODELS: TOWARDS FAST AND ACCURATE MODELLING OF WHEEL-RAIL CONTACT , 2014 .

[68]  A. E. Giannakopoulos,et al.  Investigation of rolling contact fatigue cracks in a grade 900A rail steel of a metro track , 2006 .

[69]  Uday Kumar,et al.  Holistic procedure for rail maintenance in Sweden , 2008 .

[70]  Michael Lovette,et al.  A parametric study of the lubrication transport mechanism at the rail-wheel interface , 1996 .

[71]  A. Schwab,et al.  Review of Joost Kalker’s Wheel-Rail Contact Theories and Their Implementation in Multibody Codes , 2009 .

[72]  Simon Iwnicki,et al.  Assessing the accuracy of different simplified frictional rolling contact algorithms , 2012 .

[73]  Martin Schilke,et al.  Degradation of railway rails from a materials point of view , 2013 .

[74]  P. Bolton,et al.  Rolling—sliding wear damage in rail and tyre steels , 1984 .

[75]  Ajay Kapoor,et al.  Rapid method of stress intensity factor calculation for semi-elliptical surface breaking cracks under three-dimensional contact loading , 2006 .

[76]  L. Wilson.  Performance measurements of rail curve lubricants , 2006 .

[77]  Stefan Björklund,et al.  Wheel–rail contact mechanics , 2009 .

[78]  Uwe Zerbst,et al.  Introduction to the damage tolerance behaviour of railway rails – a review , 2009 .

[79]  Geert Degrande,et al.  Experimental results of free field and structural vibrations due to underground railway traffic , 2003 .

[80]  K. Six,et al.  Plasticity in wheel–rail contact and its implications on vehicle–track interaction , 2017 .

[81]  M Ph Papaelias,et al.  A review on non-destructive evaluation of rails: State-of-the-art and future development , 2008 .

[82]  Elena Kabo,et al.  Wheel/rail rolling contact fatigue – Probe, predict, prevent , 2014 .

[83]  E. Magel.  A Survey of Wheel/Rail Friction , 2017 .

[84]  Roger Enblom,et al.  Prediction model for wheel profile wear and rolling contact fatigue , 2011 .

[85]  A. Olver.  The Mechanism of Rolling Contact Fatigue: An Update , 2005 .

[86]  Fredrik Larsson,et al.  A study of multiple crack interaction at rolling contact fatigue loading of rails , 2009 .

[87]  René Heyder,et al.  Testing of HSH® rails in high-speed tracks to minimise rail damage , 2005 .

[88]  Joe Kalousek,et al.  The blending of theory and practice in modern rail grinding , 2003 .

[89]  Klaus Knothe.  A contribution to the calculation of the contact stress distribution between two elastic bodies of revolution with non-elliptical contact area , 1984 .

[90]  Ulf Olofsson,et al.  Wheel-Rail Interface Handbook , 2009 .

[91]  Sakdirat Kaewunruen.  Identification and prioritization of rail squat defects in the field using rail magnetisation technology , 2015, Smart Structures.