Fabrication of an ultrasensitive electrochemical immunosensor for CEA based on conducting long-chain polythiols.

A conducting long-chain polythiols (poly (2-aminothiophenol), PATP) was synthesized by a chemical polymerization process and combined with Au nanoparticles (AuNPs) to prepare a novel, sensitive and label-free electrochemical biosensor by adsorption of carcinoembryonic antibody (anti-CEA) on the PATP-AuNPs modified gold electrode. Differential pulse voltammetry (DPV) was used to characterize the recognition of carcinoembryonic antigen (CEA). Under the optimized conditions, the proposed immunosensor displayed a good amperometric response to CEA with linear range from 1 fg mL(-1) to 10 ng mL(-1) and a detection limit of 0.015 fg mL(-1) (signal/noise=3). The results demonstrated that the immunosensor has advantages of high sensitivity, wide linear range, good repeatability, and good selectivity. Importantly, the results of the detection of clinical serum specimens with the proposed sensor were well consistent with the data determined by micropartical enzyme immunoassay (MPEI), showing that the present work provides a promising ultrasensitive immunoassay strategy for clinical applications.

[1]  Feng Yan,et al.  A disposable electrochemical immunosensor for flow injection immunoassay of carcinoembryonic antigen. , 2006, Biosensors & bioelectronics.

[2]  A. Henglein,et al.  Chemistry of Agn aggregates in aqueous solution: non-metallic oligomeric clusters and metallic particles , 1991 .

[3]  Zhanfang Ma,et al.  Amperometric glucose biosensor based on a triangular silver nanoprisms/chitosan composite film as immobilization matrix. , 2010, Biosensors & bioelectronics.

[4]  Jie Han,et al.  Highly uniform self-assembled conducting polymer/gold fibrous nanocomposites: additive-free controllable synthesis and application as efficient recyclable catalysts. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[5]  T. Huser,et al.  Synthesis and characterization of a disulfide reporter molecule for enhancing pH measurements based on surface-enhanced Raman scattering. , 2012, Analytical chemistry.

[6]  Xiaojun Cai,et al.  Surface Barrier Properties of Self-Assembled Monolayers as Deduced by Sum Frequency Generation Spectroscopy and Electrochemistry , 2011 .

[7]  Chenxu Yu,et al.  Rapid-response and highly sensitive noncross-linking colorimetric nitrite sensor using 4-aminothiophenol modified gold nanorods. , 2010, Analytical chemistry.

[8]  G. Whitesides,et al.  Formation of monolayer films by the spontaneous assembly of organic thiols from solution onto gold , 1989 .

[9]  G. Zotti,et al.  Star-Shaped and Linear Terthiophene-thiol Self-assembled Monolayers as Scaffolds for Gold Nanoparticles , 2007 .

[10]  J. Carrasco,et al.  Alkanethiol Adsorption on Platinum: Chain Length Effects on the Quality of Self-Assembled Monolayers , 2011 .

[11]  Tina M. Battaglia,et al.  Biocompatible polymers for antibody support on gold surfaces. , 2005, Talanta.

[12]  A. Bard,et al.  Single Nanoparticle Electrocatalysis: Effect of Monolayers on Particle and Electrode on Electron Transfer , 2009 .

[13]  R. Levicky,et al.  Polymercaptosiloxane Anchor Films for Robust Immobilization of Biomolecules to Gold Supports , 2003 .

[14]  Zhanfang Ma,et al.  Highly sensitive detection of cancer cells by electrochemical impedance spectroscopy , 2012 .

[15]  Joseph Wang,et al.  Electrochemical biosensors: towards point-of-care cancer diagnostics. , 2006, Biosensors & bioelectronics.

[16]  J. Do,et al.  Urea biosensor based on PANi(urease)-Nafion/Au composite electrode. , 2004, Biosensors & bioelectronics.

[17]  Kjersta L. Larson-Smith,et al.  Competitive adsorption of thiolated poly(ethylene glycol) and alkane-thiols on gold nanoparticles and its effect on cluster formation. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[18]  Iole Venditti,et al.  Self-assembled monolayers based on Pd-containing organometallic thiols: preparation and structural characterization. , 2009, The journal of physical chemistry. A.

[19]  Vladimir Tvarozek,et al.  Optimization of capacitive affinity sensors: drift suppression and signal amplification , 1999 .

[20]  Ralph G. Nuzzo,et al.  Spontaneously organized molecular assemblies. 3. Preparation and properties of solution adsorbed monolayers of organic disulfides on gold surfaces , 1987 .

[21]  D. Grainger,et al.  Adsorption of Ultrathin Films of Sulfur-Containing Siloxane Oligomers on Gold Surfaces and Their In situ Modification , 1994 .

[22]  James F Rusling,et al.  Characterization of multienzyme-antibody-carbon nanotube bioconjugates for immunosensors. , 2009, Journal of nanoscience and nanotechnology.

[23]  Antonio J. Ricco,et al.  NEW ORGANIC MATERIALS SUITABLE FOR USE IN CHEMICAL SENSOR ARRAYS , 1998 .

[24]  J. Schlenoff,et al.  Adsorption of short-chain thiols and disulfides onto gold under defined mass transport conditions: coverage, kinetics, and mechanism. , 2011, Journal of the American Chemical Society.

[25]  Hua-Zhong Yu,et al.  Bioreactive surfaces prepared via the self-assembly of dendron thiols and subsequent dendrimer bridging reactions. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[26]  D. Allara,et al.  Spontaneously organized molecular assemblies. 4. Structural characterization of n-alkyl thiol monolayers on gold by optical ellipsometry, infrared spectroscopy, and electrochemistry , 1987 .

[27]  Zhanfang Ma,et al.  Ultrasensitive detection of carcinoembryonic antigen by a simple label-free immunosensor , 2013 .

[28]  Nickolay V. Lavrik,et al.  Polyaniline Label-based Conductometric Sensor For IgG Detection , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[29]  P. Millner,et al.  Simultaneous deposition of Prussian Blue and creation of an electrostatic surface for rapid biosensor construction , 2009 .

[30]  John Ballato,et al.  Carbon Nanotube Doped Polyaniline , 2002 .

[31]  Jie-Ming Chen,et al.  Cast thin film biosensor design based on a Nafion backbone, a multiwalled carbon nanotube conduit, and a glucose oxidase function. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[32]  G. Mustafa,et al.  Quartz crystal microbalance sensor based on affinity interactions between organic thiols and molybdenum disulfide nanoparticles , 2012 .

[33]  M. Workentin,et al.  Michael addition reactions for the modification of gold nanoparticles facilitated by hyperbaric conditions. , 2012, Langmuir : the ACS journal of surfaces and colloids.

[34]  K. Kontturi,et al.  Electrochemical study of interfacial composite nanostructures: polyelectrolyte/gold nanoparticle multilayers assembled on phospholipid/dextran sulfate monolayers at a liquid-liquid interface. , 2005, The journal of physical chemistry. B.

[35]  Takio Noguchi,et al.  Redox properties of the ferricyanide ion on electrodes coated with layer-by-layer thin films composed of polysaccharide and poly(allylamine). , 2006, Langmuir : the ACS journal of surfaces and colloids.

[36]  I. Chianella,et al.  The application of polythiol molecules for protein immobilisation on sensor surfaces. , 2010, Biosensors & bioelectronics.

[37]  Zhenan Bao,et al.  Synthesis and Characterization of Conjugated Mono- and Dithiol Oligomers and Characterization of Their Self-Assembled Monolayers , 2003 .

[38]  S. Yokota Effect of particle size on labeling density for catalase in protein A-gold immunocytochemistry. , 1988, The journal of histochemistry and cytochemistry : official journal of the Histochemistry Society.

[39]  G. Frens Controlled Nucleation for the Regulation of the Particle Size in Monodisperse Gold Suspensions , 1973 .

[40]  Proespichaya Kanatharana,et al.  Label-free capacitive DNA sensor using immobilized pyrrolidinyl PNA probe: effect of the length and terminating head group of the blocking thiols. , 2012, Biosensors & bioelectronics.

[41]  T. Takizawa,et al.  Applications of gold cluster compounds in immunocytochemistry and correlative microscopy: comparison with colloidal gold , 2000, Journal of microscopy.