The design of robots and intelligent manipulators using modern composite materials

Abstract The operating speed and endpoint positional accuracy of existing industrial manipulators are limited by the inertial and stiffness characteristics of the articulating members of the robot's mechanical linkage. This limitation may be overcome by developing members having high structural stiffness and strength with low mass, and this has been recognized for some time. These characteristics can be obtained by fabricating the moving members of manipulators in fiber reinforced composite materials. In order to establish a basis for the dynamic analysis of robots fabricated in viscoelastic composites, a variational theorem is developed herein. A preliminary comparative study is then undertaken for manipulators manufactured in a graphite-epoxy composite material and also steel in order to demonstrate some of the advantages to be accrued from this proposed new design philosophy.

[1]  Jerome J. Connor,et al.  Finite Elements and Dynamic Viscoelasticity , 1971 .

[2]  O. C. Zienkiewicz,et al.  A numerical method of visco-elastic stress analysis , 1968 .

[3]  G. G. Lowen,et al.  Survey of investigations into the dynamic behavior of mechanisms containing links with distributed mass and elasticity , 1972 .

[4]  George N. Sandor,et al.  High-Speed Mechanism Design—A General Analytical Approach , 1975 .

[5]  J. N. Reddy,et al.  Modified Gurtin's variational principles in the linear dynamic theory of viscoelasticity , 1976 .

[6]  Wayne J. Book,et al.  Controller Design for Flexible, Distributed Parameter Mechanical Arms Via Combined State Space and Frequency Domain Techniques , 1983 .

[7]  Y. Yamada,et al.  Effect of time‐dependent material properties on dynamic response , 1974 .

[8]  P. M. Naghdi,et al.  Linear non-isothermal viscoelastic solids , 1967 .

[9]  Edward L. Wilson,et al.  Numerical methods in finite element analysis , 1976 .

[10]  Stephen W. Tsai,et al.  Dynamic Moduli and Damping Ratios in Fiber-Reinforced Composites , 1968 .

[11]  Wayne J. Book,et al.  Feedback control of two beam, two joint systems with distributed flexibility , 1975 .

[12]  Marshall J. Leitman,et al.  Variational principles in the linear dynamic theory of viscoelasticity , 1966 .

[13]  Morton E. Gurtin,et al.  Variational principles in the linear theory of viscoelusticity , 1963 .

[14]  M. V. Gandhi,et al.  An Experimental and Analytical Study of the Dynamic Response of a Linkage Fabricated from a Unidirectional Fiber-Reinforced Composite Laminate , 1983 .

[15]  David E. Hardt,et al.  Active Control of Robot Structure Deflections , 1984 .

[16]  R. Christensen,et al.  Variational and minimum theorems for the linear theory of viscoelasticity , 1968 .

[17]  William L. Cleghorn,et al.  Optimum design of high-speed flexible mechanisms , 1981 .

[18]  Francis De S. Lynch.  A finite element method of viscoelastic stress analysis with application to rolling contact problems , 1969 .

[19]  William C. Carpenter,et al.  VISCOELASTIC STRESS ANALYSIS , 1972 .

[20]  P. Grootenhuis,et al.  The dynamic properties of fibre reinforced viscoelastic composites , 1979 .

[21]  R. Byron Pipes,et al.  Composite Materials in the Automobile Industry , 1982 .

[22]  G. Cowper.  The Shear Coefficient in Timoshenko’s Beam Theory , 1966 .

[23]  Kelly,et al.  Modelling of flexibility effects in robot arms , 1981 .

[24]  Steven Dubowsky,et al.  On the Dynamic Analysis and Behavior of Industrial Robotic Manipulators With Elastic Members , 1983 .

[25]  Ulrich Holzlöhner,et al.  A finite element analysis for time‐dependent problems , 1974 .

[26]  Richard Schapery,et al.  On the time dependence of viscoelastic variational solutions , 1964 .

[27]  D. L. Thomas,et al.  Timoshenko beam finite elements , 1973 .

[28]  M. V. Gandhi,et al.  An experimental and analytical study of a four bar mechanism with links fabricated from a fiber-reinforced composite material , 1983 .