A Wheeled Wall-Climbing Robot with Bio-Inspired Spine Mechanisms

This paper presents a wheeled wall-climbing robot with the ability to climb concrete, brick walls using circular arrays of miniature spines located around the wheel. The robot consists of two driving wheels and a flexible tail, just like letter “T”, so it is called Tbot. The simple and effective structure of Tbot enables it to be steerable and to transition from horizontal to vertical surfaces rapidly and stably. Inspired by the structure and mechanics of the tarsal chain in the Serica orientalis Motschulsky, a compliant spine mechanism was developed. With the bio-inspired compliant spine mechanism, the climbing performance of Tbot was improved. It could climb on 100° (10° past vertical) brick walls at a speed of 10 cm·s−1. A mechanical model is also presented to analyze the forces acting on spine during a climbing cycle as well as load share between multi-spines. The simulation and experiment results show that the mechanical model is suitable and useful in the optimum design of Tbot.

[1]  Jonathan E. Clark,et al.  A bioinspired dynamical vertical climbing robot , 2012, Int. J. Robotics Res..

[2]  Karsten Berns,et al.  Climbing robots for maintenance and inspections of vertical structures - A survey of design aspects and technologies , 2013, Robotics Auton. Syst..

[3]  H. Hosaka,et al.  Evaluation of energy dissipation mechanisms in vibrational microactuators , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[4]  Roger D. Quinn,et al.  Mini-Whegs TM Climbs Steep Surfaces Using Insect-inspired Attachment Mechanisms , 2009, Int. J. Robotics Res..

[5]  M. Cutkosky,et al.  The Gecko’s Toe: Scaling Directional Adhesives for Climbing Applications , 2013, IEEE/ASME Transactions on Mechatronics.

[6]  Aaron Parness,et al.  Video summary of D.R.O.P. the Durable Reconnaissance and Observation Platform , 2012, 2012 IEEE International Conference on Robotics and Automation.

[7]  Roger D. Quinn,et al.  Passive Foot Design and Contact Area Analysis for Climbing Mini-Whegs , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[8]  S. Gorb,et al.  Tarsal movements in flies during leg attachment and detachment on a smooth substrate. , 2003, Journal of insect physiology.

[9]  Jari Koskinen,et al.  Microtensile testing of free-standing polysilicon fibers of various grain sizes , 1993 .

[10]  Mark R. Cutkosky,et al.  Designing Compliant Spine Mechanisms for Climbing , 2012 .

[11]  Tao Mei,et al.  A leg-wheel wall-climbing robot utilizing bio-inspired spine feet , 2013, 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[12]  Carlo Menon,et al.  Multi-Scale Compliant Foot Designs and Fabrication for Use with a Spider-Inspired Climbing Robot , 2008 .

[13]  O. Sigmund,et al.  Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[14]  Ted Hubbard,et al.  Simulation, dynamic testing and design of micromachined flexible joints , 2001 .

[15]  I. Shimoyama,et al.  Insect-model based microrobot with elastic hinges , 1994 .

[16]  Metin Sitti,et al.  A miniature ceiling walking robot with flat tacky elastomeric footpads , 2009, 2009 IEEE International Conference on Robotics and Automation.

[17]  William C. Tang,et al.  Viscous air damping in laterally driven microresonators , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[18]  Parviz Soroushian,et al.  A new self-loading locomotion mechanism for wall climbing robots employing biomimetic adhesives , 2013 .

[19]  Aaron Parness,et al.  DROP: the Durable Reconnaissance and Observation Platform , 2013, Ind. Robot.

[20]  Chang-Soo Han,et al.  A survey of climbing robots: Locomotion and adhesion , 2010 .

[21]  TaeWon Seo,et al.  Tank-Like Module-Based Climbing Robot Using Passive Compliant Joints , 2013, IEEE/ASME Transactions on Mechatronics.

[22]  Tao Chen,et al.  Design of a Bio-inspired Dynamical Vertical Climbing Robot , 2007, Robotics: Science and Systems.

[23]  Sangbae Kim,et al.  Design and fabrication of multi-material structures for bioinspired robots , 2009, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[24]  Jonathan E. Clark,et al.  A self-exciting controller for high-speed vertical running , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[25]  Daniel E. Koditschek,et al.  Rapid pole climbing with a quadrupedal robot , 2009, 2009 IEEE International Conference on Robotics and Automation.

[26]  R. L. Edwards,et al.  Measurements of Young's modulus, Poisson's ratio, and tensile strength of polysilicon , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[27]  Metin Sitti,et al.  Waalbot II: Adhesion Recovery and Improved Performance of a Climbing Robot using Fibrillar Adhesives , 2011, Int. J. Robotics Res..

[28]  Carlo Menon,et al.  Abigaille-III: A Versatile, Bioinspired Hexapod for Scaling Smooth Vertical Surfaces , 2014 .

[29]  Daniel E. Koditschek,et al.  Biologically inspired climbing with a hexapedal robot , 2008 .

[30]  S. Zill,et al.  Elasticity and movements of the cockroach tarsus in walking , 1999, Journal of Comparative Physiology A.

[31]  Mark R. Cutkosky,et al.  Scaling Hard Vertical Surfaces with Compliant Microspine Arrays , 2006, Int. J. Robotics Res..

[32]  Metin Sitti,et al.  Tankbot: A Palm-size, Tank-like Climbing Robot using Soft Elastomer Adhesive Treads , 2010, Int. J. Robotics Res..

[33]  L. Frantsevich,et al.  Structure and mechanics of the tarsal chain in the hornet, Vespa crabro (Hymenoptera: Vespidae): implications on the attachment mechanism. , 2004, Arthropod structure & development.