Structural mass in direct-drive permanent magnet electrical generators

Direct-drive permanent magnet (PM) synchronous machines for wind turbines are large, heavy and thus expensive to build, transport and install. The structure that is required to maintain the airgap clearance is often heavier than the electromagnetically active material. It is shown that the structural material can be estimated early on in the design process for axial-flux and radial-flux machines. By moving to a design without iron in the stator, the forces that the machine structure must deal with can be significantly reduced. The mass of iron-cored and air-cored axial-flux PM synchronous machines for a range of multi-MW wind turbines is compared. Scaling laws for PM generators in direct-drive wind turbines are also developed.

[1]  Thomas Hartkopf,et al.  Direct-drive generators for megawatt wind turbines , 1997 .

[2]  Maxime R. Dubois,et al.  Optimized Permanent Magnet Generator Topologies for Direct-Drive Wind Turbines , 2004 .

[3]  Ervin Bossanyi,et al.  Wind Energy Handbook , 2001 .

[4]  Paul Gordon.  Aspects of, and new approaches to, the design of direct drive generators for wind turbines , 2004 .

[5]  E. Spooner,et al.  TORUS' : a slotless, toroidal-stator, permanent-magnet generator , 1992 .

[6]  H. Polinder,et al.  Conventional and TFPM linear generators for direct-drive wave energy conversion , 2005, IEEE Transactions on Energy Conversion.

[7]  P. Pillay,et al.  PM wind generator topologies , 2005, IEEE Transactions on Industry Applications.

[8]  Anders Grauers,et al.  Design of Direct-driven Permanent-magnet Generators for Wind Turbines , 1996 .

[9]  A S Pippard.  Studies in Elastic Structures , 1952 .

[10]  H. Polinder,et al.  Comparison of generator topologies for direct-drive wind turbines including structural mass , 2006 .

[11]  Jonathan A. Lynch,et al.  Northern Power Systems WindPACT Drive Train Alternative Design Study Report; Period of Performance: April 12, 2001 to January 31, 2005 , 2004 .

[12]  J. R. Bumby,et al.  Axial-flux permanent-magnet air-cored generator for small-scale wind turbines , 2005 .

[13]  Alasdair McDonald,et al.  Structural analysis of low speed, high torque electrical generators for direct drive renewable energy converters , 2008 .

[14]  E. Spooner,et al.  Lightweight ironless-stator PM generators for direct-drive wind turbines. , 2005 .

[15]  Markus Mueller,et al.  Mechanical Design Tools for Low Speed High Torque Electrical Machines , 1988 .

[16]  C. Pritchard,et al.  European Wind Energy Conference , 2002 .

[17]  Henk Polinder,et al.  Basic Operation Principles and Electrical Conversion Systems of Wind Turbines , 2005 .

[18]  Markus Mueller,et al.  Structural analysis of low-speed axial-flux permanent-magnet machines , 2005 .