论文信息 - Simultaneous measurement of down-hole high pressure and temperature with a bulk-modulus and FBG sensor

Simultaneous measurement of down-hole high pressure and temperature with a bulk-modulus and FBG sensor

A free active element bulk-modulus-based fiber Bragg grating (FBG) sensor for down-hole pressure and temperature measurement is presented. With a differential measurement method and an isosceles triangle cantilever structure, problems of cross-sensitivity and chirped-signal in FBG sensors are solved. Simulation results indicate that the measurement sensitivity in measuring pressure and temperature is estimated to be /spl sim/8.5 pm/MPa in a range from standard atmosphere pressure to 100 MPa and /spl sim/27.5 pm//spl deg/C from 20 to 200/spl deg/C, respectively.

Yanbiao Liao | Shurong Lai | Yong Zhao

[1] Michael A. Davis,et al. Fiber grating sensors , 1997 .

[2] Guiyun Kai,et al. FBG-type sensor for simultaneous measurement of force (or displacement) and temperature based on bilateral cantilever beam , 2001 .

[3] Faramarz Farahi,et al. Simultaneous measurement of strain and temperature using interferometrically interrogated fiber Bragg grating sensors , 2000 .

[4] Hwa-Yaw Tam,et al. Simultaneous strain and temperature measurement using a superstructure fiber Bragg grating , 2000 .

[5] William W. Morey,et al. IN-FIBER BRAGG-GRATING SENSORS , 1988 .

[6] Kenneth T. V. Grattan,et al. Fiber optic sensor for dual measurement of temperature and strain using a combined fluorescence lifetime decay and fiber Bragg grating technique , 2001 .

[7] B. Lee,et al. Simultaneous measurement of strain and temperature by use of a single fiber Bragg grating written in an erbium:ytterbium-doped fiber. , 2000, Applied optics.