论文信息 - Automatic Generation of Milling Toolpaths with Tool Engagement Control for Complex Part Geometry

Automatic Generation of Milling Toolpaths with Tool Engagement Control for Complex Part Geometry

Abstract This paper presents a NC toolpath generation strategy with tool engagement control for arbitrarily complex discrete part geometry, which reduces machining time and tool wear and can be used in high speed machining. Simulations and comparison with existing methods are presented.

Theodor Borangiu | Alexandru Dumitrache | Anamaria Dogar

[1] Paul S. Heckbert,et al. Survey of Polygonal Surface Simplification Algorithms , 1997 .

[2] R. Pasko,et al. HIGH SPEED MACHINING ( HSM ) – THE EFFECTIVE WAY OF MODERN CUTTING , 2002 .

[3] Hongcheng Wang,et al. A Metric-Based Approach to Two-Dimensional (2D) Tool-Path Optimization for High-Speed Machining , 2005 .

[4] Paul K. Wright,et al. Constant engagement tool path generation for convex geometries , 2000 .

[5] Th. Borangiu,et al. Intelligent Control Station for a Robot-Tended Adaptive Machine Tool , 2000 .

[6] Soichi Ibaraki,et al. Constant engagement tool path generation to enhance machining accuracy in end milling , 2006 .

[7] Robert B. Fisher,et al. Hypermedia image processing reference , 1996 .

[8] Soichi Ibaraki,et al. CONSTANT ENGAGEMENT TOOL PATH GENERATION FOR TWO-DIMENSIONAL END MILLING , 2004 .

[9] Theodor Borangiu,et al. AUTOMATIC GENERATION OF 3D MACHINING SURFACES WITH TOOL COMPENSATION FROM GRAYLEVEL IMAGE MODELS , 2007 .

[10] Hongcheng Wang,et al. A Metric-Based Approach to 2D Tool-Path Optimization for High-Speed Machining , 2002 .

[11] Min-Yang Yang,et al. An optimized contour parallel tool path for 2D milling with flat endmill , 2006 .