An integrated fuzzy DEMATEL-fuzzy ANP approach to nominate diagnostic method and measuring total predictive performance score

Abstract Proper conditional-based maintenance program supplies outstanding benefits to industrial plants. In order to obtain such advantages, a comprehensive model should be taking into account, which embraces viability, implementation and performance assessment of the program. In this paper, a three-stage strategy is exerted, which first enables the feasibility study of the program’s set-up, then allows the selection of the most satisfactory predictive technique based on a hybrid fuzzy DEMATEL-fuzzy ANP approach. The entered weights to the ANP super matrix and computations in relation to consistency ratio and limited matrix are implemented via SuperDecisions software. Subsequently effectiveness of the predictive maintenance program (PMP) evaluated bearing in mind the strategic and maintenance guidelines of a corporation using simple average weighting method (SAW). The case study mentioned has shown, that in this particular case, the vibration analysis is the most suitable predictive technique, followed by the ultrasonic.

[1]  Rajkumar Roy,et al.  Overview of Remaining Useful Life Prediction Techniques in Through-life Engineering Services☆ , 2014 .

[2]  Jian-Xin You,et al.  Evaluating health-care waste treatment technologies using a hybrid multi-criteria decision making model , 2015 .

[3]  Jianfeng Li,et al.  An evaluation of maintenance strategy using risk based inspection , 2011 .

[4]  Maurizio Bevilacqua,et al.  A combined goal programming - AHP approach to maintenance selection problem , 2006, Reliab. Eng. Syst. Saf..

[5]  Jay Lee,et al.  Methodology and Framework of a Cloud-Based Prognostics and Health Management System for Manufacturing Industry , 2013 .

[6]  Marcello Braglia,et al.  The analytic hierarchy process applied to maintenance strategy selection , 2000, Reliab. Eng. Syst. Saf..

[7]  Selim Zaim,et al.  Maintenance strategy selection using AHP and ANP algorithms: a case study , 2012 .

[8]  María Del Carmen Carnero Moya,et al.  Model for the Selection of Predictive Maintenance Techniques , 2007, INFOR Inf. Syst. Oper. Res..

[9]  Chi-Jen Lin,et al.  A causal analytical method for group decision-making under fuzzy environment , 2008, Expert Syst. Appl..

[10]  Lihui Wang,et al.  Predictive Maintenance : Literature Review and Future Trends , 2015 .

[11]  Robert B. Randall,et al.  Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications , 2011 .

[12]  Ilya Ivlev,et al.  Multi-criteria decision analysis for supporting the selection of medical devices under uncertainty , 2015, Eur. J. Oper. Res..

[13]  María Carmen Carnero.  Fuzzy Multicriteria Model for Selection of Vibration Technology , 2016 .

[14]  Satnam Singh,et al.  A prognostic framework for health management of coupled systems , 2011, 2011 IEEE Conference on Prognostics and Health Management.

[15]  Shu-Ping Wan,et al.  A novel group decision making method with intuitionistic fuzzy preference relations for RFID technology selection , 2016, Appl. Soft Comput..

[16]  Zhuang Wang,et al.  Log-based predictive maintenance , 2014, KDD.

[17]  Andrew K. S. Jardine,et al.  Optimizing a mine haul truck wheel motors’ condition monitoring program Use of proportional hazards modeling , 2001 .

[18]  Lihui Wang,et al.  Context Awareness in Predictive Maintenance , 2016 .

[19]  Ray S. Beebe,et al.  Condition monitoring of steam turbines by performance analysis , 2003 .

[20]  M. Fischedick,et al.  Multicriteria analysis of primary steelmaking technologies , 2016 .

[21]  Mayorkinos Papaelias,et al.  Condition monitoring of wind turbines: Techniques and methods , 2012 .

[22]  Sadhan Kumar Ghosh,et al.  Model for a Predictive Maintenance System Effectiveness Using the Analytical Hierarchy Process as Analytical Tool , 2015 .

[23]  Jian Wan,et al.  Predictive Maintenance for Improved Sustainability — An Ion Beam Etch Endpoint Detection System Use Case , 2014 .

[24]  Zenonas Turskis,et al.  Multi-criteria analysis of electricity generation technologies in Lithuania , 2016 .

[25]  Guangxiang Yang,et al.  Condition Monitoring and Fault Diagnosis for an Antifalling Safety Device , 2015 .

[26]  Zahir Irani,et al.  A framework for managing maintenance using performance measurement systems , 2001 .

[27]  Adam G. Rehorn,et al.  State-of-the-art methods and results in tool condition monitoring: a review , 2005 .

[28]  Viliam Makis,et al.  A Control-Limit Policy And Software For Condition-Based Maintenance Optimization , 2001 .

[29]  Gwo-Hshiung Tzeng,et al.  Evaluating intertwined effects in e-learning programs: A novel hybrid MCDM model based on factor analysis and DEMATEL , 2007, Expert Syst. Appl..

[30]  N. S. Arunraj,et al.  Risk-based maintenance policy selection using AHP and goal programming. , 2010 .

[31]  Aditya Parida,et al.  Development of a multi‐criteria hierarchical framework for maintenance performance measurement (MPM) , 2007 .

[32]  Teng Gong,et al.  A novel intelligent method for mechanical fault diagnosis based on dual-tree complex wavelet packet transform and multiple classifier fusion , 2016, Neurocomputing.

[33]  María Del Carmen Carnero Moya,et al.  An evaluation system of the setting up of predictive maintenance programmes , 2006, Reliab. Eng. Syst. Saf..

[34]  Quan Zhou,et al.  Identifying critical success factors in emergency management using a fuzzy DEMATEL method , 2011 .

[35]  Noureddine Zerhouni,et al.  Remaining useful life estimation based on nonlinear feature reduction and support vector regression , 2013, Eng. Appl. Artif. Intell..

[36]  Aida Azizi,et al.  Selection of optimum maintenance strategies based on a fuzzy analytic hierarchy process , 2014 .

[37]  Frank L. Lewis,et al.  Intelligent Diagnosis and Prognosis of Tool Wear Using Dominant Feature Identification , 2009, IEEE Transactions on Industrial Informatics.

[38]  Jingzheng Ren,et al.  Fuzzy multi-criteria decision-making method for technology selection for emissions reduction from shipping under uncertainties , 2015 .

[39]  W. Wang,et al.  An asset residual life prediction model based on expert judgments , 2008, Eur. J. Oper. Res..

[40]  María Carmen Carnero,et al.  Control of wear applied to compressors : trends in lubricant analysis , 1999 .

[41]  Maria Del Carmen CARNERO MOYA.  Model for the Selection of Predictive Maintenance Techniques , 2007 .

[42]  Haritha Saranga.  Relevant condition‐parameter strategy for an effective condition‐based maintenance , 2002 .

[43]  Paresh Girdhar.  Practical Machinery Vibration Analysis and Predictive Maintenance , 2004 .

[44]  A. Gabus,et al.  World Problems, An Invitation to Further Thought within the Framework of DEMATEL , 1972 .