High-performance hole-extraction layer of sol-gel-processed NiO nanocrystals for inverted planar perovskite solar cells.

Hybrid organic/inorganic perovskite solar cells have been rapidly evolving with spectacular successes in both nanostructured and thin-film versions. Herein, we report the use of a simple sol-gel-processed NiO nanocrystal (NC) layer as the hole-transport layer in an inverted perovskite solar cell. The thin NiO NC film with a faceted and corrugated surface enabled the formation of a continuous and compact layer of well-crystallized CH3 NH3 PbI3 in a two-step solution process. The hole-extraction and -transport capabilities of this film interfaced with the CH3 NH3 PbI3 film were higher than those of organic PEDOT:PSS layers. The cell with a NiO NC film with a thickness of 30-40 nm exhibited the best performance, as a thinner layer led to a higher leakage current, whereas a thicker layer resulted in a higher series resistance. With the NiO film, we observed a cell efficiency of 9.11 %, which is by far the highest reported for planar perovskite solar cells based on an inorganic hole-extracting layer.

[1]  Konrad Wojciechowski,et al.  Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency , 2014 .

[2]  Michael D. McGehee,et al.  Materials science: Fast-track solar cells , 2013, Nature.

[3]  M. Horie,et al.  Effect of hole transporting layers on the performance of PCPDTBT : PCBM organic solar cells , 2012 .

[4]  Andrés J. García,et al.  Evidence for near-Surface NiOOH Species in Solution-Processed NiOx Selective Interlayer Materials: Impact on Energetics and the Performance of Polymer Bulk Heterojunction Photovoltaics , 2011 .

[5]  Qi Chen,et al.  Planar heterojunction perovskite solar cells via vapor-assisted solution process. , 2014, Journal of the American Chemical Society.

[6]  Nam-Gyu Park,et al.  Organometal Perovskite Light Absorbers Toward a 20% Efficiency Low-Cost Solid-State Mesoscopic Solar Cell , 2013 .

[7]  Yun-Chorng Chang,et al.  Nickel Oxide Electrode Interlayer in CH3NH3PbI3 Perovskite/PCBM Planar‐Heterojunction Hybrid Solar Cells , 2014, Advanced materials.

[8]  Jun Peng,et al.  Greatly Reduced Processing Temperature for a Solution‐Processed NiOx Buffer Layer in Polymer Solar Cells , 2013 .

[9]  B. Hsieh,et al.  Work function of indium tin oxide transparent conductor measured by photoelectron spectroscopy , 1996 .

[10]  Timothy L. Kelly,et al.  Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques , 2013, Nature Photonics.

[11]  Chang Ming Li,et al.  Organic solar cells employing electrodeposited nickel oxide nanostructures as the anode buffer layer , 2012 .

[12]  Henk J. Bolink,et al.  Perovskite solar cells employing organic charge-transport layers , 2013, Nature Photonics.

[13]  Gary Hodes,et al.  Perovskite-Based Solar Cells , 2013, Science.

[14]  John R. Reynolds,et al.  Solution‐Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells , 2013 .

[15]  Qi Chen,et al.  Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility. , 2014, ACS nano.

[16]  Nam-Gyu Park,et al.  Organolead Halide Perovskite: New Horizons in Solar Cell Research , 2014 .

[17]  D. Ginley,et al.  Enhanced Efficiency in Plastic Solar Cells via Energy Matched Solution Processed NiOx Interlayers , 2011 .

[18]  H. Snaith.  Perovskites: The Emergence of a New Era for Low-Cost, High-Efficiency Solar Cells , 2013 .

[19]  M. Grätzel,et al.  Sequential deposition as a route to high-performance perovskite-sensitized solar cells , 2013, Nature.

[20]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[21]  He Yan,et al.  Efficiency enhancement of perovskite solar cells through fast electron extraction: the role of graphene quantum dots. , 2014, Journal of the American Chemical Society.

[22]  Henry J Snaith,et al.  Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates , 2013, Nature Communications.

[23]  Mohammad Khaja Nazeeruddin,et al.  Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency , 2014, Nature Communications.