Exploring Infrared Sensoring for Real Time Welding Defects Monitoring in GTAW

This paper presents an evaluation of an infrared sensor for monitoring the welding pool temperature in a Gas Tungsten Arc Welding (GTAW) process. The purpose of the study is to develop a real time system control. It is known that the arc welding pool temperature is related to the weld penetration depth; therefore, by monitoring the temperature, the arc pool temperature and penetration depth are also monitored. Various experiments were performed; in some of them the current was varied and the temperature changes were registered, in others, defects were induced throughout the path of the weld bead for a fixed current. These simulated defects resulted in abrupt changes in the average temperature values, thus providing an indication of the presence of a defect. The data has been registered with an acquisition card. To identify defects in the samples under infrared emissions, the timing series were analyzed through graphics and statistic methods. The selection of this technique demonstrates the potential for infrared emission as a welding monitoring parameter sensor.

[1]  David G. Stork,et al.  Pattern Classification , 1973 .

[2]  Bryan A. Chin,et al.  Infrared sensing techniques for penetration depth control of the submerged arc welding process , 2001 .

[3]  C. M. Fortunko Ultrasonic Detection and Sizing of Two-Dimensional Weld Defects in the Long-Wavelength Limit , 1980 .

[4]  Adolfo Cobo,et al.  Real-time arc welding defect detection technique by means of plasma spectrum optical analysis , 2006 .

[5]  H. S. Wolff,et al.  iRun: Horizontal and Vertical Shape of a Region-Based Graph Compression , 2022, Sensors.

[6]  Paul G. Sanders,et al.  Real-time monitoring of laser beam welding using infrared weld emissions , 1998 .

[7]  S. C. Absi Alfaro,et al.  A statistical approach for monitoring stochastic welding processes , 2006 .

[8]  Shigeo Abe DrEng Pattern Classification , 2001, Springer London.

[9]  J. P. Huissoon,et al.  Identifying weld pool dynamics for gas metal arc fillet welds , 1999 .

[10]  Yue Liu,et al.  Computer vision application for weld defect detection and evaluation , 1998, Other Conferences.

[11]  Ulrich Appel,et al.  Adaptive sequential segmentation of piecewise stationary time series , 1983, Inf. Sci..

[12]  Jens Timmer,et al.  Handbook of Time Series Analysis , 2006 .

[13]  David G. Stork,et al.  Pattern Classification (2nd ed.) , 1999 .

[14]  Baldev Raj,et al.  Thermography for Online Detection of Incomplete Penetration and Penetration Depth Estimation , 2006 .

[15]  D. S. G. Pollock,et al.  A handbook of time-series analysis, signal processing and dynamics , 1999 .

[16]  Bryan A. Chin,et al.  A sensing system for weld process control , 1999 .