Effect of interfacial stability on microstructure and properties of carbon fiber reinforced aluminum matrix composites

[1]  Xixi Huang,et al.  Thermal diffusion behavior of Fe/Cu/Ni multilayer coatings: a molecular dynamics study , 2022, Modelling and Simulation in Materials Science and Engineering.

[2]  Tetsuya Yamamoto,et al.  Use of hollow colloids for generating nanovoids to mitigate the brittle fracture of carbon fiber-reinforced thermoplastics , 2021 .

[3]  Ruirun Chen,et al.  Effect of Ni2+ concentration on microstructure and bonding capacity of electroless copper plating on carbon fibers , 2021 .

[4]  Di Zhang,et al.  Process optimization, microstructure characterization and thermal properties of mesophase pitch-based carbon fiber reinforced aluminum matrix composites fabricated by vacuum hot pressing , 2021 .

[5]  J. Sha,et al.  Improved wettability and mechanical properties of metal coated carbon fiber-reinforced aluminum matrix composites by squeeze melt infiltration technique , 2021 .

[6]  Tie-hu Li,et al.  3D continuous copper networks coated with graphene in Al-matrix composites for efficient thermal management , 2020 .

[7]  L. Ding,et al.  High thermal conductivity of GF@Cu@Ni/Si/Al composites reinforced with Cu and Ni co-deposited graphite flakes , 2020 .

[8]  Ying Huang,et al.  High volume fraction of copper coated graphite flake∖Nitrogen doped carbon fiber reinforced aluminum matrix composites , 2020 .

[9]  Wenzhen Qin,et al.  Synergistic Effects of Graphene/Carbon Nanotubes Hybrid Coating on the Interfacial and Mechanical Properties of Fiber Composites , 2020, Materials.

[10]  Chunlei Wang,et al.  Deposition mechanism of electroless nickel plating of composite coatings on magnesium alloy , 2019, Chemical Engineering Science.

[11]  H. Jiang,et al.  Microstructural evolution and phase transformation in the liquid-solid Al/Ni diffusion couple , 2019, Philosophical Magazine.

[12]  Jianjun Yang,et al.  Fabrication of Al2O3–SiCw protective coatings on carbon fiber by the sol-spraying method , 2018, Journal of Sol-Gel Science and Technology.

[13]  Xiaopeng Han,et al.  Effects of nanotube content on thermal and mechanical properties of NT@Cu/Ag@GF/Al composites , 2018, Journal of Alloys and Compounds.

[14]  R. Pei,et al.  Effect of interfacial microstructure on the thermal-mechanical properties of mesophase pitch-based carbon fiber reinforced aluminum composites , 2018, Journal of Alloys and Compounds.

[15]  Meng Yu,et al.  High Thermal Conductivity and Mechanical Properties of Nanotube@Cu/Ag@Graphite/Aluminum Composites , 2018, Industrial & Engineering Chemistry Research.

[16]  C. He,et al.  Structural and melting properties of Cu-Ni clusters: A simulation study , 2018, Journal of Alloys and Compounds.

[17]  Y. Ouyang,et al.  Molecular dynamics simulation of diffusion bonding of Al–Cu interface , 2014 .

[18]  Y. Cong,et al.  Tensile strength, oxidation resistance and wettability of carbon fibers coated with a TiC layer using a molten salt method , 2013 .

[19]  W. Krenkel,et al.  Influence of thermal treatment on thermo-mechanical stability and surface composition of carbon fiber , 2013 .

[20]  Y. Sung,et al.  Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process , 2012 .

[21]  Heng-An Wu,et al.  Interlayer shear effect on multilayer graphene subjected to bending , 2012 .

[22]  Shaowei Zhang,et al.  Molten Salt Synthesis and Characterization of Titanium Carbide-Coated Graphite Flakes for Refractory Castable Applications , 2011 .

[23]  A. Mirhabibi,et al.  The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting , 2010 .

[24]  E. Elangovan,et al.  Micro-structural and tensile strength analyses on the magnesium matrix composites reinforced with coated carbon fiber , 2009 .

[25]  Lei Liu,et al.  Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings , 2009 .

[26]  Seyed Mojtaba Zebarjad,et al.  The effects of volume percent and aspect ratio of carbon fiber on , 2008 .

[27]  A. Ureña,et al.  Effect of copper electroless coatings on the interaction between a molten Al–Si–Mg alloy and coated short carbon fibres , 2007 .

[28]  M. Kajihara,et al.  Numerical analysis for migration of interface between liquid and solid phases during reactive diffusion in the binary Cu–Al system , 2007 .

[29]  Shan Chen,et al.  Atomistic investigation of the effects of temperature and surface roughness on diffusion bonding between Cu and Al , 2007 .

[30]  María Sánchez,et al.  Characterization of interfacial mechanical properties in carbon fiber/aluminium matrix composites by the nanoindentation technique , 2005 .

[31]  C. Chao,et al.  Effects of carbon fiber/Al interface on mechanical properties of carbon-fiber-reinforced aluminum-matrix composites , 2004 .

[32]  R. Drew,et al.  Wettability and spreading kinetics of Al and Mg on TiC , 2003 .

[33]  N. Papanicolaou,et al.  Second-moment interatomic potential for Al, Ni and Ni-Al alloys, and molecular dynamics application , 2003 .

[34]  A. Kennedy,et al.  Reaction in Al–TiC metal matrix composites , 2001 .

[35]  Yiu-Wing Mai,et al.  Effect of fibre/matrix adhesion on residual strength of notched composite laminates , 1998 .

[36]  David M. Ferguson,et al.  Constant temperature simulations using the Langevin equation with velocity Verlet integration , 1998 .

[37]  J. M. Toguri,et al.  Wettability of nickel coated graphite by aluminum , 1998 .

[38]  N. Frage,et al.  Wettability and phase formation in the TiCxAl system , 1997 .

[39]  Hannes Jónsson,et al.  Systematic analysis of local atomic structure combined with 3D computer graphics , 1994 .

[40]  Steve Plimpton,et al.  Fast parallel algorithms for short-range molecular dynamics , 1993 .

[41]  J. B. Adams,et al.  EAM study of surface self-diffusion of single adatoms of fcc metals Ni, Cu, Al, Ag, Au, Pd, and Pt , 1991 .

[42]  Salah U. Hamim,et al.  Carbon fiber reinforced metal matrix composites: Fabrication processes and properties , 2017 .

[43]  Susanne Ebersbach,et al.  Chemical Thermodynamics Of Materials , 2016 .

[44]  A. Stukowski.  Modelling and Simulation in Materials Science and Engineering Visualization and analysis of atomistic simulation data with OVITO – the Open Visualization Tool , 2009 .