Bibliometric Analysis of Specific Energy Consumption (SEC) in Machining Operations: A Sustainable Response

This paper’s persistence is to make an inclusive analysis of 268 documents about specific energy consumption (SEC) in machining operations from 2001 to 2020 in the Scopus database. A systematic approach collects information on SEC documents’ primary data; their types, publications, citations, and predictions are presented. The VOSviewer 1.1.16 and Biblioshiny 2.0 software are used for visualization analysis to show the progress standing of SEC publications. The selection criteria of documents are set for citation analysis. The ranks are assigned to the most prolific and dominant authors, sources, articles, countries, and organizations based on the total citations, number of documents, average total citation, and total link strength. The author-keywords, index-keywords, and text data content analysis has been conducted to find the hotspots and progress trend in SEC in machining operations. The most prolific and dominant article, source, author, organization, and country are Anderson et al. “Laser-assisted machining of Inconel 718 with an economic analysis”, the Int J Mach Tools Manuf, Shin Y.C., form Purdue University Singapore, and United States, respectively, based on total citations as per defined criteria. The author keywords “specific cutting energy” and “surface roughness” dominate the machining operations SEC. SEC’s implication in machining operations review and bibliometric analysis is to deliver an inclusive perception for the scholars working in this field. It is the primary paper that utilizes bibliometric research to analyze the SEC in machining operations publications expansively. It is valuable for scholars to grasp the hotspots in this field in time and help the researchers in the SEC exploration arena rapidly comprehend the expansion status and trend.

[1]  Raman Kumar,et al.  Multi objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operation , 2017 .

[2]  Sehijpal Singh,et al.  An Investigation of Energy Efficiency in Finish Turning of EN 353 Alloy Steel , 2021 .

[3]  Raman Kumar,et al.  ANALYSIS THE EFFECTS OF PROCESS PARAMETERS IN EN24 ALLOY STEEL DURING CNC TURNING BY USING MADM , 2013 .

[4]  Gaurav Soni,et al.  Optimization of Process Parameters During CNC Turning by Using AHP & VIKOR Method , 2013 .

[5]  Erween Abd Rahim,et al.  Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique , 2019, Journal of Cleaner Production.

[6]  Y. Shin,et al.  Laser-Assisted Machining of Magnesia-Partially-Stabilized Zirconia , 2004 .

[7]  Azwan Iskandar Azmi,et al.  New bio-based nanolubricants for turning of Inconel 718 towards improvement of tool wear resistance and specific cutting energy , 2019 .

[8]  Magnus Karlsson,et al.  Specific Energy Consumption/Use (SEC) in Energy Management for Improving Energy Efficiency in Industry: Meaning, Usage and Differences , 2019, Energies.

[9]  Chander Prakash,et al.  Multiple-Criteria Decision-Making and Sensitivity Analysis for Selection of Materials for Knee Implant Femoral Component , 2021, Materials.

[10]  Philip Hallinger.  A Meta-Synthesis of Bibliometric Reviews of Research on Managing for Sustainability, 1982–2019 , 2021, Sustainability.

[11]  Y. K. Chou,et al.  Tool nose radius effects on finish hard turning , 2004 .

[12]  Hong-Seok Park,et al.  An Energy Efficient Turning Process for Hardened Material with Multi-Criteria Optimization , 2016 .

[13]  Haizea Gaztañaga,et al.  Energy efficiency optimisation in industrial processes: Integral decision support tool , 2020 .

[14]  H. Singh,et al.  HA-based coating by plasma spray techniques on titanium alloy for orthopedic applications , 2021 .

[15]  J. Paulo Davim,et al.  Turning of Brasses Using Minimum Quantity of Lubricant (MQL) and Flooded Lubricant Conditions , 2007 .

[16]  S. Ramakrishna,et al.  Characterization of three‐dimensional printed thermal‐stimulus polylactic acid‐hydroxyapatite‐based shape memory scaffolds , 2020 .

[17]  Mahmudur Rahman,et al.  A predictive model of the critical undeformed chip thickness for ductile–brittle transition in nano-machining of brittle materials , 2013 .

[18]  Erween Abd Rahim,et al.  A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys , 2011 .

[19]  Sami Kara,et al.  Unit process energy consumption models for material removal processes , 2011 .

[20]  Kuldip Singh Sangwan,et al.  A systematic literature review on machine tool energy consumption , 2020 .

[21]  Y. Shin,et al.  Machinability improvement of titanium alloy (Ti–6Al–4V) via LAM and hybrid machining , 2010 .

[22]  H.-W. Hoffmeister,et al.  Chip Formation in Machining Ti6Al4V at Extremely High Cutting Speeds , 2001 .

[23]  Yung C. Shin,et al.  Improvement of machinability of Waspaloy via laser-assisted machining , 2013 .

[24]  R. Suresh,et al.  Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool , 2012 .

[26]  Xun Xu,et al.  Energy-efficient machining systems: a critical review , 2014 .

[27]  Journal Ijmer,et al.  Optimization of Turning Parameters Using Taguchi Method , 2014 .

[28]  Hong Chen,et al.  Research trends and hotspots related to global carbon footprint based on bibliometric analysis: 2007–2018 , 2020, Environmental Science and Pollution Research.

[29]  Wei Cai,et al.  Energy benchmarking rules in machining systems , 2018 .

[30]  Govind Sharan Dangayach,et al.  Application of optimization techniques in metal cutting operations: A bibliometric analysis , 2020 .

[31]  Ludo Waltman,et al.  Text mining and visualization using VOSviewer , 2011, ArXiv.

[32]  Lin Li,et al.  Energy requirements evaluation of milling machines based on thermal equilibrium and empirical modelling , 2013 .

[33]  Paul Mativenga,et al.  Improving the integrity of specific cutting energy coefficients for energy demand modelling , 2015 .

[34]  C. Varum,et al.  Industry 4.0 and Sustainability: A Bibliometric Literature Review , 2021, Sustainability.

[35]  S. Ramakrishna,et al.  Surface Characteristics of Machined Polystyrene with 3D Printed Thermoplastic Tool , 2020, Materials.

[36]  Ludo Waltman,et al.  Software survey: VOSviewer, a computer program for bibliometric mapping , 2009, Scientometrics.

[37]  Paul Mativenga,et al.  E-smart toolpath machining strategy for process planning , 2016 .

[38]  Jatin,et al.  Revealing the benefits of entropy weights method for multi-objective optimization in machining operations: A critical review , 2021, Journal of Materials Research and Technology.

[39]  Paul Mativenga,et al.  Impact of un-deformed chip thickness on specific energy in mechanical machining processes , 2014 .

[40]  T. Özel,et al.  Optimization and fabrication of curvilinear micro-grooved cutting tools for sustainable machining based on finite element modelling of the cutting process , 2020, The International Journal of Advanced Manufacturing Technology.

[41]  Y. Shin,et al.  Experimental evaluation of laser-assisted machining of silicon carbide particle-reinforced aluminum matrix composites , 2013 .

[42]  Fu Zhao,et al.  Environmental Sustainability of Laser-Based Manufacturing: Case Studies on Laser Shock Peening and Laser Assisted Turning , 2009 .

[43]  Albert J. Shih,et al.  Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass , 2004 .

[44]  S. I. Jaffery,et al.  Development of specific cutting energy map for sustainable turning: a study of Al 6061 T6 from conventional to high cutting speeds , 2020 .

[45]  Jie Zhu,et al.  Visualizing the knowledge domain of sustainable development research between 1987 and 2015: a bibliometric analysis , 2017, Scientometrics.

[46]  Zhixiong Zeng,et al.  Energy conservation and environmental sustainability during grinding operation of Ti–6Al–4V alloys via eco-friendly oil/graphene nano additive and Minimum quantity lubrication , 2020 .

[47]  Hakki Ozgur Unver,et al.  Energy efficiency of machining operations: A review , 2017 .

[48]  Sourabh Paul,et al.  Minimisation of specific cutting energy and back force in turning of AISI 1060 steel , 2018 .

[49]  Y. Shin,et al.  Laser-assisted machining of Inconel 718 with an economic analysis , 2006 .

[50]  Sung-Hoon Ahn,et al.  Empirical Study of the Power Efficiency of Various Machining Processes , 2014 .

[51]  Y. Shin,et al.  Laser-Assisted Machining of a Fiber Reinforced Metal Matrix Composite , 2010 .

[52]  Raman Kumar,et al.  Optimization of energy consumption response parameters for turning operation using Taguchi method , 2016 .

[53]  Raman Kumar,et al.  Analysis of Air Quality Index During Lockdown: A Case of Ludhiana District-Punjab , 2021 .

[54]  W. Grzesik,et al.  Influence of Machining Conditions on the Energy Consumption and Productivity in Finish Hard Turning , 2018 .

[55]  Isuamfon F. Edem,et al.  Effect of Cutting Parameters on Surface Finish when Turning Nitronic 33 Steel alloy , 2015 .

[56]  Y. Shin,et al.  IMPROVING MACHINABILITY OF HIGH CHROMIUM WEAR-RESISTANT MATERIALS VIA LASER–ASSISTED MACHINING , 2013 .

[57]  P. Riehmann,et al.  Interactive Sankey diagrams , 2005, IEEE Symposium on Information Visualization, 2005. INFOVIS 2005..

[58]  Congbo Li,et al.  An investigation into the dependence of energy efficiency on CNC process parameters with a sustainable consideration of electricity and materials , 2017, 2017 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

[59]  Joost Duflou,et al.  Optimization of energy consumption and surface quality in finish turning , 2012 .

[60]  Yung C. Shin,et al.  Laser-assisted machining of compacted graphite iron , 2006 .

[61]  Jianfeng Li,et al.  Characterizing the effect of process variables on energy consumption in end milling , 2018, The International Journal of Advanced Manufacturing Technology.

[62]  Sunpreet Singh,et al.  Selection of portable hard disk drive based upon weighted aggregated sum product assessment method: A case of Indian market , 2020 .

[63]  Kuldip Singh Sangwan,et al.  A bibliometric analysis of green manufacturing and similar frameworks , 2015 .

[64]  Sung-Hoon Ahn,et al.  Towards greener machine tools – A review on energy saving strategies and technologies , 2015 .

[65]  Li Li,et al.  A method integrating Taguchi, RSM and MOPSO to CNC machining parameters optimization for energy saving , 2016 .

[66]  Marlene Amorim,et al.  Circular Economy and Internet of Things: Mapping Science of Case Studies in Manufacturing Industry , 2021, Sustainability.

[67]  Liming Wang,et al.  An improved cutting power model of machine tools in milling process , 2017 .

[68]  Jing Li,et al.  Energy consumption model and energy efficiency of machine tools: a comprehensive literature review , 2016 .