Precipitation of intersected plate-like γ′ phase in β and its effect on creep behavior of multiphase Ni3Al-based intermetallic alloy

[1]  Huijun Li,et al.  Formation of multiply twinned martensite plates in rapidly solidified Ni3Al-based superalloys , 2019, Materials Letters.

[2]  Yunwei Liu,et al.  Microstructure and mechanical properties of Ni3Al-based alloy joint transient liquid phase bonded using Ni/Ti interlayer , 2019, Intermetallics.

[3]  Yongchang Liu,et al.  Influences of solution cooling rate on microstructural evolution of a multiphase Ni3Al-based intermetallic alloy , 2019, Intermetallics.

[4]  Huijun Li,et al.  Effect of annealing treatment on microstructure evolution and creep behavior of a multiphase Ni3Al-based superalloy , 2019, Materials Science and Engineering: A.

[5]  Huijun Li,et al.  Coarsening behavior of γ′ precipitates in the γ'+γ area of a Ni3Al-based alloy , 2019, Journal of Alloys and Compounds.

[6]  Kyu C. Cho,et al.  Composition-dependent interdiffusion coefficient, reduced elastic modulus and hardness in γ-, γ′- and β-phases in the Ni-Al system , 2017 .

[7]  S. Gong,et al.  Influence of solidification history on precipitation behavior of TCP phase in a completely heat-treated Ni3Al based single crystal superalloy during thermal exposure , 2017 .

[8]  M. Qian,et al.  The effect of long term high temperature annealing on twinning and detwinning of the wrought Ni3Al-based alloy , 2017 .

[9]  Huijun Li,et al.  Deformation behavior and processing maps of Ni3Al-based superalloy during isothermal hot compression , 2017 .

[10]  S. David,et al.  Welding of unique and advanced ductile intermetallic alloys for high-temperature applications , 2017 .

[11]  Baoshuai Zhang,et al.  Creep properties and deformation mechanism of the containing 4.5Re/3.0Ru single crystal nickel-based superalloy at high temperatures , 2015 .

[12]  Zbigniew Bojar,et al.  Applications of Ni3Al Based Intermetallic Alloys—Current Stage and Potential Perceptivities , 2015, Materials.

[13]  Hui-chen Yu,et al.  Influence of element Re on deformation mechanism within γ′ phase of single crystal nickel-based superalloys during creep at elevated temperatures , 2014 .

[14]  Yufeng Zheng,et al.  Microstructure characteristics and compressive properties of NiAl-based multiphase alloy during heat treatments , 2011 .

[15]  Roger C. Reed,et al.  DEFORMATION MECHANISMS IN NI-BASE DISK SUPERALLOYS AT HIGHER TEMPERATURES , 2008 .

[16]  R. Reed.  The Superalloys: Fundamentals and Applications , 2006 .

[17]  Dongyun Lee.  Effects of solution heat treatment on the microstructure, oxidation, and mechanical properties of a cast Ni3Al-based intermetallic alloy , 2006 .

[18]  J. Lapin,et al.  Microstructure and mechanical properties of a directionally solidified and aged intermetallic Ni–Al–Cr–Ti alloy with β-γ′-γ-α structure , 2000 .

[19]  S. Deevi,et al.  Advances in processing of Ni3Al-based intermetallics and applications , 2000 .

[20]  C. Humphreys,et al.  The effect of annealing on the microstructure and tensile properties of a β/γ′ Ni–Al–Fe alloy , 2000 .

[21]  V. Sikka,et al.  Processing of nickel aluminides and their industrial applications , 1992 .

[22]  R. Cahn,et al.  Three-phase (β + β′ + γ′) NiAlTi(Cr,Fe) alloys for high temperature use , 1992 .

[23]  O. Izumi,et al.  Improvement in Room Temperature Ductility of the L1 2 Type Intermetallic Compound Ni 3 Al by Boron Addition , 1979 .