Microstructure and wear properties of powder-pack borided Ti-5Al-2.5Sn alloy

[1]  M. Peng,et al.  The effect of alloying elements in Ti-5Mo-5V-8Cr-3Al alloy on growth kinetics of TiB whiskers in boride layer , 2023, Materials & Design.

[2]  İlyas Türkmen,et al.  Characteristics of boronized Ti6Al4V alloy using boric acid based boronizing mixture , 2022, Materials Characterization.

[3]  Hongmei Zhang,et al.  Effect of Ti5Si3 on the wear properties of Ti-3Si-1.5Fe-1Mo titanium alloy with ultrahigh hardness , 2022, Journal of Materials Research and Technology.

[4]  Xinyuan Wang,et al.  Microstructure and some properties of powder-pack borided Ti–5Mo–5V–8Cr–3Al alloy with special attention to the microstructure at the interface TiB/substrate , 2022, Ceramics International.

[5]  Yong-qing Zhao,et al.  On Enhancing Wear Resistance of Titanium Alloys by Laser Cladded WC-Co Composite Coatings , 2022, SSRN Electronic Journal.

[6]  J. Komotori,et al.  Surface modification of titanium alloy via atmospheric pressure nitrogen plasma assisted femtosecond laser irradiation , 2022, CIRP Annals.

[7]  Xinyuan Wang,et al.  Corrosion and wear properties of TB2 titanium alloy borided by pack boriding with La2O3 , 2022, Transactions of Nonferrous Metals Society of China.

[8]  Egemen Sulukan,et al.  Wear and friction behavior of CrTiN/TiCN and CrTiN/CrCN multilayer composite coatings , 2022, Ceramics International.

[9]  Xin Wu,et al.  Modification Effect of Graphene Oxide on Oxidation Coating of Ti-3Zr-2Sn-3Mo-25Nb Near-β Titanium Alloy , 2022, SSRN Electronic Journal.

[10]  G. Cai,et al.  Enhancement of Eu2+ photoluminescence behavior in NaBaB9O15 based on the K+ doping , 2021, Journal of Luminescence.

[11]  M. Peng,et al.  Microstructure and high-temperature oxidation behaviors of surface layer on TA2 pure titanium by boriding and aluminizing two-steps method , 2021, Ceramics International.

[12]  G. Qin,et al.  A novel biomedical titanium alloy with high antibacterial property and low elastic modulus , 2021 .

[13]  Yong-qing Zhao,et al.  Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys , 2021, Journal of Materials Science & Technology.

[14]  M. Peng,et al.  Hardness gradient layer on pure titanium based on the prefabricated TiB whiskers , 2021 .

[15]  J. Li,et al.  High strength-ductility synergy of MgAlB4 whisker reinforced aluminum matrix composites achieved by in situ synthesis , 2021 .

[16]  M. Dargusch,et al.  TiB Nanowhisker Reinforced Titanium Matrix Composite with Improved Hardness for Biomedical Applications , 2020, Nanomaterials.

[17]  Wen-cong Zhang,et al.  The Sticking Out Mechanism and Growth of TiB Whiskers from TiBw/Ti-6Al-4V Composites during Sintering , 2020, Metals.

[18]  A. Günen,et al.  Mechanical Properties and Corrosion Resistance of Borosintered Distaloy Steels , 2020, Journal of Materials Engineering and Performance.

[19]  G. Kara,et al.  Mechanical properties and cell proliferation response of borided biomedical titanium alloys with different crystalline structures , 2020 .

[20]  Dan Liu,et al.  Characteristics, wear and corrosion properties of borided pure titanium by pack boriding near α → β phase transition temperature , 2020 .

[21]  Yang Jin,et al.  Microstructure and mechanical properties of electron beam welded TC4/TA7 dissimilar titanium alloy joint , 2020 .

[22]  D. Sharma,et al.  Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining , 2020 .

[23]  L. Yingying,et al.  Elevated Temperature Deformation Behavior of TA7 Titanium Alloy , 2018, Rare Metal Materials and Engineering.

[24]  Zhizhong Chen,et al.  Surface evolution and growth kinetics of Ti6Al4V alloy in pack boriding , 2018 .

[25]  Y. Lai,et al.  The Growth Behavior of Titanium Boride Layers in α and β Phase Fields of Titanium , 2016, Metallurgical and Materials Transactions A.

[26]  Angshuman Sarkar,et al.  In situ synthesis, fabrication and Rietveld refinement of the hydroxyapatite/titania composite coatings on 316L SS , 2014 .

[27]  Guozhong Li,et al.  Surface performance and physical properties of nanoscale ceramics reinforced laser alloying composite coatings , 2014 .

[28]  Yimin Gao,et al.  Anisotropic elastic and thermal properties of titanium borides by first-principles calculations , 2013 .

[29]  B. Tang,et al.  Characteristics and wear performance of borided Ti6Al4V alloy prepared by double glow plasma surface alloying , 2013 .

[30]  Bo Xu,et al.  Microscopic theory of hardness and design of novel superhard crystals , 2012 .

[31]  S. Hong,et al.  Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti–6Al–4V composites , 2012 .

[32]  J. Ouyang,et al.  Friction and wear properties of reactive hot-pressed TiB2–TiN composites in sliding against Al2O3 ball at elevated temperatures , 2011 .

[33]  Jiecai Han,et al.  The ideal strength of transition metal diborides TMB2 (TM = Ti, Zr, Hf): Plastic anisotropy and the role of prismatic slip , 2010 .

[34]  H. Cimenoglu,et al.  Characteristics and wear performance of borided Ti6Al4V alloy , 2008 .

[35]  Curtis Lee,et al.  Physical and Mechanical Properties of Nanostructured Titanium Boride (TiB) Ceramic , 2008 .

[36]  M. Tan,et al.  High temperature deformation in Ti–5Al–2.5Sn alloy , 2007 .

[37]  Nishant M. Tikekar,et al.  Nature of growth of dual titanium boride layers with nanostructured titanium boride whiskers on the surface of titanium , 2007 .

[38]  L. Geng,et al.  Elastic Properties of Titanium Monoboride Measured by Nanoindentation , 2006 .

[39]  K. Chandran,et al.  Determination of elastic constants of titanium diboride (TiB2) from first principles using FLAPW implementation of the density functional theory , 2006 .

[40]  Matt Probert,et al.  First-principles simulation: ideas, illustrations and the CASTEP code , 2002 .

[41]  H. Gu,et al.  Tensile and low-cycle fatigue behavior of commercially pure titanium and Ti–5Al–2.5Sn alloy at 293 and 77 K , 2001 .

[42]  R. Munro.  Material Properties of Titanium Diboride , 2000, Journal of research of the National Institute of Standards and Technology.

[43]  Julian D. Maynard,et al.  Elastic constants and crystal anisotropy of titanium diboride , 1997 .

[44]  P. Mogilevsky,et al.  Reactive Formation of TiB at the TiB2-Ti Interface , 1997 .

[45]  Jan Almlöf,et al.  General methods for geometry and wave function optimization , 1992 .

[46]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[47]  O. Gunnarsson,et al.  Density-functional calculation of effective Coulomb interactions in metals. , 1991, Physical review. B, Condensed matter.

[48]  O. Hunter,et al.  Elastic properties of polycrystalline TiB2, ZrB2 and HfB2 from room temperature to 1300 °K☆ , 1969 .

[49]  W. Kohn,et al.  Self-Consistent Equations Including Exchange and Correlation Effects , 1965 .

[50]  R. Hill.  The Elastic Behaviour of a Crystalline Aggregate , 1952 .

[51]  E. Bacaksız,et al.  MICROSTRUCTURE AND TRIBOLOGICAL PROPERTIES OF Ti BORIDED BY ELECTRON BEAM EVAPORATION TECHNIQUE , 2015 .

[52]  Zhang Hong-xing.  First-principles calculation of crystal structures and energies of Ti-H system , 2008 .

[53]  S. Semiatin,et al.  Thermomechanical processing of alpha titanium alloys : an overview , 1999 .

[54]  Zhengxiao Guo,et al.  The kinetics and mechanism of interfacial reaction in sigma fibre-reinforced Ti MMCs , 1997 .

[55]  K. Nagai,et al.  Strength and fracture toughness of Ti5Al2.5Sn ELI alloy at cryogenic temperatures , 1986 .

[56]  F. Glaser,et al.  Transition metal diborides , 1954 .

[57]  A. Reuss,et al.  Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle . , 1929 .