Root Crack Identification of Sun Gear in Planetary Gear System Combining Fault Dynamics with VMD Algorithm

Planetary gearbox is widely used in various low-speed machines due to its large transmission ratio. However, the gears in a planetary gearbox are prone to the mechanical faults due to the complex dynamic heavy load. Vibration frequencies caused by an early tooth root crack of sun gear are usually difficult to accurately extract, so its fault diagnosis is one of the main challenges of planetary gearbox reliability. In this paper, a simplified tooth root crack model of sun gear is proposed, and then a rigid-flexible coupled dynamics model of the whole planetary gear system is constructed. By the numerical simulation, the fault frequencies caused by a tooth root crack of sun gear are obtained. A Variational Mode Decomposition (VMD) algorithm for the vibration frequency extraction is proposed. The measured vibration signals are decomposed into the sparse Intrinsic Mode Functions (IMFs) by the VMD, and then the IMFs are further analyzed by the spectral method to accurately extract the crack-induced frequency components. The experimental results show that the proposed dynamics model and VMD method are feasible; an error between the characteristic frequencies from the tested signal analysis and the theoretical calculation is less than 1%.

[1]  Chen Yu-shu,et al.  Detection of weak signals based on empirical mode decomposition and singular spectrum analysis , 2013 .

[2]  Yaguo Lei,et al.  A review on empirical mode decomposition in fault diagnosis of rotating machinery , 2013 .

[3]  Jun Zhang,et al.  Effects of tooth-crack-induced mesh stiffness on fault signals of a planetary gear train , 2017, ANT/SEIT.

[4]  Lihui Wang,et al.  Vibration fault features of planetary gear train with cracks under time-varying flexible transfer functions , 2021 .

[5]  Jihong Yan,et al.  Improved Hilbert-Huang transform based weak signal detection methodology and its application on incipient fault diagnosis and ECG signal analysis , 2014, Signal Process..

[6]  Qinghua Hu,et al.  Mechanical fault diagnosis based on redundant second generation wavelet packet transform, neighborhood rough set and support vector machine , 2012 .

[7]  N. Huang,et al.  The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis , 1998, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  Huaiju Liu,et al.  Influences of carrier assembly errors on the dynamic characteristics for wind turbine gearbox , 2016 .

[9]  Hui Ma,et al.  Effects of gear crack propagation paths on vibration responses of the perforated gear system , 2015 .

[10]  Cai-chao Zhu,et al.  Dynamic Analysis of Planetary Gear Transmission System Considering the Flexibility of Internal Ring Gear , 2020, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.

[11]  Fulei Chu,et al.  Recent advances in time–frequency analysis methods for machinery fault diagnosis: A review with application examples , 2013 .

[12]  Yaguo Lei.  Research Advances of Fault Diagnosis Technique for Planetary Gearboxes , 2011 .

[13]  Lang Li,et al.  Multibody modeling of varying complexity for dynamic analysis of large-scale wind turbines , 2016 .

[14]  Guolin He,et al.  Frequency response model and mechanism for wind turbine planetary gear train vibration analysis , 2017 .

[15]  Yimin Shao,et al.  The effect of a localized fault in the planet bearing on vibrations of a planetary gear set , 2018 .

[16]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[17]  T. Lim,et al.  Transmission error investigation of gearbox using rigid-flexible coupling dynamic model: Theoretical analysis and experiments , 2021 .

[18]  Zaigang Chen,et al.  Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack , 2013 .

[19]  Jing Liu,et al.  Vibration analysis of a planetary gear with the flexible ring and planet bearing fault , 2020 .

[20]  Norden E. Huang,et al.  Ensemble Empirical Mode Decomposition: a Noise-Assisted Data Analysis Method , 2009, Adv. Data Sci. Adapt. Anal..

[21]  Fakher Chaari,et al.  Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking , 2006 .

[22]  Zhifang Zhu,et al.  Fault feature analysis of planetary gear system with tooth root crack and flexible ring gear rim , 2015 .

[23]  Datong Qin,et al.  Dynamic characteristics of the herringbone planetary gear set during the variable speed process , 2014 .

[24]  Fakher Chaari,et al.  Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness , 2009 .

[25]  Uday Kumar,et al.  Analytical Crack Propagation Scenario for Gear Teeth and Time-Varying Gear Mesh Stiffness , 2012 .

[26]  Xuefeng Chen,et al.  Fault mechanism and dynamic modeling of planetary gear with gear wear , 2021 .

[27]  Shixi Yang,et al.  A new procedure for extracting fault feature of multi-frequency signal from rotating machinery , 2012 .

[28]  Yimin Shao,et al.  Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth , 2011 .

[29]  Srečko Glodež,et al.  Computational model for the analysis of bending fatigue in gears , 2002 .

[30]  Kamal Hadad,et al.  Fault diagnosis and classification based on wavelet transform and neural network , 2011 .

[31]  Dominique Zosso,et al.  Variational Mode Decomposition , 2014, IEEE Transactions on Signal Processing.

[32]  Rui Ma,et al.  Detection of weak signals based on empirical mode decomposition and singular spectrum analysis , 2013, IET Signal Process..

[33]  Wim Desmet,et al.  Multibody modelling of varying complexity for modal behaviour analysis of wind turbine gearboxes , 2010 .