Evaluation of encapsulating coatings on the performance of polypyrrole actuators

Conjugated polymer actuators are electroactive materials capable of generating force and movement in response to an applied external voltage. Many potential biomedical and industrial applications require these actuators to operate in a liquid environment. However, immersion of uncoated conducting polymer actuators in non-electrolyte liquids greatly reduces their operating lifetime. Here, we demonstrate the use of spray coating as an effective and simple method to encapsulate polypyrrole (PPy) tri-layer bending actuators. Poly(styrene-b-isobutylene-b-styrene) (SIBS) was used as an encapsulating, compliant spray coating on PPy actuators. A significant enhancement in actuator lifetime in both air and water was observed by encapsulating the actuators. The change in stiffness and reduction in bending amplitude for coatings of different thickness was studied. A simple beam mechanics model describes the experimental results and highlights the importance of coating compliance for actuator coatings. The model may be used to evaluate other possible encapsulating materials.

[1]  E. Smela.  Conjugated Polymer Actuators for Biomedical Applications , 2003 .

[2]  Leonard Pinchuk,et al.  Medical applications of poly(styrene-block-isobutylene-block-styrene) ("SIBS"). , 2008, Biomaterials.

[3]  Gursel Alici,et al.  Finding NEMO (novel electromaterial muscle oscillator): a polypyrrole powered robotic fish with real-time wireless speed and directional control , 2009 .

[4]  G. Wallace,et al.  Actuators for the cochlear implant , 2003 .

[5]  Marco-A. De Paoli,et al.  A solid state artificial muscle based on polypyrrole and a solid polymeric electrolyte working in air , 1997 .

[6]  B. Tillack,et al.  Atomically controlled CVD processing of group IV semiconductors for ultra-large-scale integrations , 2012 .

[7]  G. Wallace,et al.  Evaluation of thrust force generated for a robotic fish propelled with polypyrrole actuators , 2010 .

[8]  E. Smela,et al.  Microfabricating conjugated polymer actuators. , 2000, Science.

[9]  Edwin Jager,et al.  Conjugated-Polymer Micro- and Milliactuators for Biological Applications , 2002 .

[10]  Richard H. Boyd,et al.  Molecular packing and diffusion in polyisobutylene , 1991 .

[11]  Noel E. O'Connor,et al.  Wireless aquatic navigator for detection and analysis (WANDA) , 2010 .

[12]  Karen Willcox,et al.  Kinetics and kinematics for translational motions in microgravity during parabolic flight. , 2009, Aviation, space, and environmental medicine.

[13]  A. MacDiarmid,et al.  Artificial muscle: electromechanical actuators using polyaniline films , 1994 .

[14]  Q. Pei,et al.  Bending bilayer strips built from polyaniline for artificial electrochemical muscles , 1993 .

[15]  Rachel Z. Pytel,et al.  Artificial muscle technology: physical principles and naval prospects , 2004, IEEE Journal of Oceanic Engineering.

[16]  Danilo De Rossi,et al.  Conductive-polymer-based structures for a steerable catheter , 2000, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[17]  G. Wallace,et al.  Solid state actuators based on polypyrrole and polymer-in-ionic liquid electrolytes , 2003 .

[18]  G. Alici,et al.  Validation of Resonant Frequency Model for Polypyrrole Trilayer Actuators , 2008, IEEE/ASME Transactions on Mechatronics.

[19]  Christopher David Cook,et al.  Bending modeling and its experimental verification for conducting polymer actuators dedicated to manipulation applications , 2006 .

[20]  Ian W. Hunter,et al.  Encapsulated polypyrrole actuators , 1999 .

[21]  R. Baughman.  Conducting polymer artificial muscles , 1996 .

[22]  G. Wallace,et al.  Use of Ionic Liquids for π-Conjugated Polymer Electrochemical Devices , 2002, Science.

[23]  I. Hunter,et al.  Fast contracting polypyrrole actuators , 2000 .

[24]  G. Wallace,et al.  Fast trilayer polypyrrole bending actuators for high speed applications , 2006 .

[25]  D. V. Krevelen,et al.  Prediction of polymer densities , 1969 .

[26]  Robert F. Steidel,et al.  An introduction to mechanical vibrations , 1971 .

[27]  Jie Ding,et al.  High performance conducting polymer actuators utilising a tubular geometry and helical wire interconnects , 2003 .

[28]  Toribio F. Otero,et al.  Electrochemomechanical properties from a bilayer: polypyrrole / non-conducting and flexible material — artificial muscle , 1992 .