This paper describes a research program conducted to enable accurate prediction of the impact tolerance of the shuttle Orbiter leading-edge wing panels using 'physics-based- codes such as LS-DYNA, a nonlinear, explicit transient dynamic finite element code. The shuttle leading-edge panels are constructed of Reinforced-Carbon-Carbon (RCC) composite material, which issued because of its thermal properties to protect the shuttle during re-entry into the Earth's atmosphere. Accurate predictions of impact damage from insulating foam and other debris strikes that occur during launch required materials characterization of expected debris, including strain-rate effects. First, analytical models of individual foam and RCC materials were validated. Next, analytical models of individual foam cylinders impacting 6-in. x 6-in. RCC flat plates were developed and validated. LS-DYNA pre-test models of the RCC flat plate specimens established the impact velocity of the test for three damage levels: no-detectable damage, non-destructive evaluation (NDE) detectable damage, or visible damage such as a through crack or hole. Finally, the threshold of impact damage for RCC on representative Orbiter wing panels was predicted for both a small through crack and for NDE-detectable damage.
[1]
Kelly S. Carney,et al.
The Use of LS-DYNA in the Columbia Accident Investigation and Return to Flight Activities
,
2004
.
[2]
Robert L. Taylor,et al.
A constitutive model for anisotropic damage in fiber-composites
,
1995
.
[3]
Kelly S. Carney,et al.
Material Modeling of Space Shuttle Leading Edge and External Tank Materials For Use in the Columbia Accident Investigation
,
2004
.
[4]
Kelly S. Carney,et al.
A Summary of the Space Shuttle Columbia Tragedy and the Use of LS Dyna in the Accident Investigation and Return to Flight Efforts
,
2004
.
[5]
Kelly S. Carney,et al.
Application of Non-Deterministic Methods to Assess Modeling Uncertainties for Reinforced Carbon-Carbon Debris Impacts
,
2004
.