High-frequency guided ultrasonic waves to monitor corrosion thickness loss

Corrosion due to adverse environmental conditions can occur for a range of industrial structures, e.g., ships and offshore oil platforms. Pitting corrosion and generalized corrosion can lead to the reduction of the strength and thus degradation of the structural integrity. The nondestructive detection and monitoring of corrosion damage in difficult to access areas can be achieved using high frequency guided ultrasonic waves propagating along the structure. Using standard ultrasonic transducers with single sided access to the structure, the two fundamental Lamb wave modes were selectively generated simultaneously, penetrating through the complete thickness of the structure. The wave propagation and interference of the guided wave modes depends on the thickness of the structure. Numerical simulations were performed using a 2D Finite Difference Method (FDM) algorithm in order to visualize the guided wave propagation and energy transfer across the plate thickness. Laboratory experiments were conducted and the...

[1]  P Cawley,et al.  High-temperature (>500°c) wall thickness monitoring using dry-coupled ultrasonic waveguide transducers , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[2]  Paul Fromme,et al.  High frequency guided ultrasonic waves for hidden fatigue crack growth monitoring in multi-layer model aerospace structures , 2015 .

[3]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  B. Masserey,et al.  Surface defect detection in stiffened plate structures using Rayleigh-like waves , 2009 .

[5]  I. A. Viktorov.  Rayleigh and Lamb Waves , 1967 .

[6]  Jennifer E. Michaels,et al.  Guided Wave Damage Characterization via Minimum Variance Imaging with a Distributed Array of Ultrasonic Sensors , 2014 .

[7]  J. Virieux.  P-SV wave propagation in heterogeneous media: Velocity‐stress finite‐difference method , 1986 .

[8]  Paul Fromme,et al.  Feature-guided waves for monitoring adhesive shear modulus in bonded stiffeners , 2013 .

[9]  B. Masserey,et al.  In-situ monitoring of fatigue crack growth using high frequency guided waves , 2015 .

[10]  G. W. Farnell,et al.  Finite Difference Analysis of Rayleigh Wave Scattering at Vertical Discontinuities , 1973 .

[11]  B. Auld,et al.  Acoustic fields and waves in solids , 1973 .

[12]  P. Fromme,et al.  Detection of cracks at rivet holes using guided waves. , 2002, Ultrasonics.

[13]  H. Arai,et al.  Effect of pitting corrosion on local strength of hold frames of bulk carriers (1st report) , 2004 .

[14]  Paul Fromme,et al.  Fatigue crack growth monitoring using high-frequency guided waves , 2013 .

[15]  Irving J. Oppenheim,et al.  The transition from Lamb waves to longitudinal waves in plates , 2008 .

[16]  Edoardo Mazza,et al.  Analysis of the near-field ultrasonic scattering at a surface crack , 2005 .

[17]  Paul Fromme,et al.  High-frequency guided ultrasonic waves for hidden defect detection in multi-layered aircraft structures. , 2014, Ultrasonics.

[18]  P. Fromme,et al.  Monitoring of corrosion damage using high-frequency guided ultrasonic waves , 2015 .

[19]  Paul Fromme,et al.  On the reflection of coupled Rayleigh-like waves at surface defects in plates. , 2008, The Journal of the Acoustical Society of America.

[20]  B. W. Maxfield,et al.  Generation and detection of higher-order mode clusters of guided waves (HOMC-GW) using meander-coil EMATs , 2012, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[21]  William D. O’Brien,et al.  Measurements of coupled Rayleigh wave propagation in an elastic plate , 1997 .

[22]  Paul D. Wilcox,et al.  On the Scattering and Mode Conversion of the A0 Lamb Wave Mode at Circular Defects in Plates , 2004 .

[23]  Paul Fromme.  Monitoring of corrosion damage using high-frequency guided ultrasonic waves , 2013, Smart Structures.

[24]  P. Fromme,et al.  MONITORING OF PLATE STRUCTURES USING GUIDED ULTRASONIC WAVES , 2008 .

[25]  P. Fromme.  Health monitoring of plate structures using guided waves , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[26]  M. Lowe,et al.  DISPERSE: A GENERAL PURPOSE PROGRAM FOR CREATING DISPERSION CURVES , 1997 .