Influence of structure of porous polyketone microfiltration membranes on separation of water‐in‐oil emulsions

[1]  R. Gonzales,et al.  Surface modification of thin film composite forward osmosis membrane using tris(2-aminoethyl)amine for enhanced ammonium recovery , 2022, Desalination.

[2]  W. Jin,et al.  Integration of thin film composite graphene oxide membranes for solvent resistant nanofiltration , 2022, Journal of Membrane Science.

[3]  R. Gonzales,et al.  Effect of polymer-solvent compatibility on polyamide hollow fiber membranes prepared via thermally induced phase separation , 2022, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[4]  Wei Jiang,et al.  A Review on Oil/Water Emulsion Separation Membrane Material , 2022, Journal of Environmental Chemical Engineering.

[5]  R. Gonzales,et al.  Interfacial polymerization of thin film selective membrane layers: Effect of polyketone substrates , 2021 .

[6]  H. Shon,et al.  Facile development of comprehensively fouling-resistant reduced polyketone-based thin film composite forward osmosis membrane for treatment of oily wastewater , 2021 .

[7]  H. Matsuyama,et al.  In situ formation of ultrathin polyampholyte layer on porous polyketone membrane via a one-step dopamine co-deposition strategy for oil/water separation with ultralow fouling , 2021 .

[8]  H. Matsuyama,et al.  Enabling polyketone membrane with underwater superoleophobicity via a hydrogel-based modification for high-efficiency oil-in-water emulsion separation , 2021 .

[9]  H. Shon,et al.  Fabrication of porous polyketone forward osmosis membranes modified with aromatic compounds: Improved pressure resistance and low structural parameter , 2020 .

[10]  Lizhi Zhao,et al.  Antifouling slippery liquid-infused membrane for separation of water-in-oil emulsions , 2020 .

[11]  H. Matsuyama,et al.  Controlling the formation of porous polyketone membranes via a cross-linkable alginate additive for oil-in-water emulsion separations , 2020 .

[12]  Emily N. Tummons,et al.  Membrane fouling by emulsified oil: A review , 2020 .

[13]  G. Pang,et al.  PVDF-modified TiO2 nanowires membrane with underliquid dual superlyophobic property for switchable separation of oil-water emulsions. , 2020, ACS applied materials & interfaces.

[14]  H. Matsuyama,et al.  Engineering of ultrafine polydopamine nanoparticles in-situ assembling on polyketone substrate for highly-efficient oil-water emulsions separation , 2020 .

[15]  Shu-Yii Wu,et al.  Gluconacetobacter xylinus synthesized biocellulose nanofiber membranes with superhydrophilic and superoleophobic underwater properties for the high-efficiency separation of oil/water emulsions , 2020 .

[16]  Da-Ming Wang,et al.  Dual Superlyophobic Aliphatic Polyketone Membranes for Highly Efficient Emulsified Oil-Water Separation: Performance and Mechanism. , 2018, ACS applied materials & interfaces.

[17]  H. Tseng,et al.  Superoleophilic and superhydrophobic carbon membranes for high quantity and quality separation of trace water-in-oil emulsions , 2018, Journal of Membrane Science.

[18]  Qinglin Huang,et al.  ECTFE hybrid porous membrane with hierarchical micro/nano-structural surface for efficient oil/water separation , 2017 .

[19]  Shuangfeng Wang,et al.  Inspired by Stenocara Beetles: From Water Collection to High-Efficiency Water-in-Oil Emulsion Separation. , 2017, ACS nano.

[20]  Y. Si,et al.  A study on the fabrication of porous PVDF membranes by in-situ elimination and their applications in separating oil/water mixtures and nano-emulsions , 2016 .

[21]  J. Leckie,et al.  Carbon–silica composite nanofiber membrane for high flux separation of water-in-oil emulsion – Performance study and fouling mechanism , 2015 .

[22]  Jingye（李景烨） Li,et al.  pH-Induced Non-Fouling Membrane for Effective Separation of Oil-in-Water Emulsion , 2015 .

[23]  Nidal Hilal,et al.  Membrane technology enhancement in oil–water separation. A review , 2015 .

[24]  G. McKinley,et al.  Study of factors governing oil-water separation process using TiO₂ films prepared by spray deposition of nanoparticle dispersions. , 2014, ACS Applied Materials and Interfaces.

[25]  V. Pham,et al.  Superhydrophobic silanized melamine sponges as high efficiency oil absorbent materials. , 2014, ACS applied materials & interfaces.

[26]  Lingyun Liu,et al.  Superhydrophilic and underwater superoleophobic poly(sulfobetaine methacrylate)-grafted glass fiber filters for oil-water separation. , 2014, ACS applied materials & interfaces.

[27]  Lei Jiang,et al.  An Intelligent Superwetting PVDF Membrane Showing Switchable Transport Performance for Oil/Water Separation , 2014, Advanced materials.

[28]  H. Pan,et al.  Synthesis and characterization of a novel bornadiene/carbon monoxide polyketone based on a renewable α-pinene derivative , 2013 .

[29]  Lei Jiang,et al.  Ultrafast Separation of Emulsified Oil/Water Mixtures by Ultrathin Free‐Standing Single‐Walled Carbon Nanotube Network Films , 2013, Advanced materials.

[30]  Lei Jiang,et al.  Superhydrophobic and Superoleophilic PVDF Membranes for Effective Separation of Water‐in‐Oil Emulsions with High Flux , 2013, Advanced materials.

[31]  R. M. Boom,et al.  Separation kinetics of an oil-in-water emulsion under enhanced gravity , 2012 .

[32]  Wonjae Choi,et al.  Hygro-responsive membranes for effective oil–water separation , 2012, Nature Communications.

[33]  K. B. Gross,et al.  Bio-inspired onboard membrane separation of water from engine oil , 2011 .

[34]  Chen-Lu Yang.  Electrochemical coagulation for oily water demulsification , 2007 .

[35]  Antonio Hernández,et al.  Comparison of liquid¿liquid displacement porosimetry and scanning electron microscopy image analysis to characterise ultrafiltration track-etched membranes , 2004 .

[36]  D. Mcclements,et al.  Impact of weighting agents and sucrose on gravitational separation of beverage emulsions. , 2000, Journal of agricultural and food chemistry.

[37]  J. Lagarón,et al.  Characterization of the Structure and Crystalline Polymorphism Present in Aliphatic Polyketones by Raman Spectroscopy , 2000 .